JVC NX-CDR7 manual Messages

Messages

Message	Signification	Solution
ALL SKIP TR	Skip marks are recorded to all the tracks.	Replace the disc.
ALREADY FINAL	You are trying to erase a track or add a skip mark on a finalized
	disc.
ALREADY UNFIN.	You are trying to unfinalize an unfinalized disc.
BLANK DISC	Loaded disc is blank.
CANNOT ERASE	Loaded disc is damaged. Erasure on this disc is impossible.	Replace the disc.
CANNOT FIN.	Loaded disc is damaged. Finalization on this disc is impossible.	Replace the disc.
CANNOT LISTEN	You are trying to adjust the volume during high-speed recording.	During high-speed recording, no
		sound can be heard; therefore
		you cannot adjust the volume.
CANNOT REC	Disc is damaged. Recording on this disc is impossible.	Replace the disc.
CANNOT UNFIN.	Loaded disc is damaged. Unfinalization on this disc is	Replace the disc.
	impossible.
CDR DISC NG	Loaded CD-R is damaged.	Replace the disc.
DAO DISC	You are trying to unfinalize a CD-RW which has been recorded	Replace the disc.
	using the “Disc At Once” recording system.
DISC FULL	You are trying to record on a fully recorded CD-R or CD-RW.	Replace the disc.
NOT AUDIO IN	Incoming digital signal is not of an audio format.	Check the source played on the
		external component connected to
		the LINE DIGITAL IN terminal.
NOT REC MUTE	You are trying to use the REC MUTE button during Synchro-	You can only use the REC
	nized Recording.	MUTE button during Standard
		Recording.
NO AUDIO DISC	Loaded disc is not an audio disc.	Replace the disc.
NO RW DISC	You are trying to perform one of the functions which is only	Load a CD-RW.
	possible on a CD-RW.
NO R/RW DISC	You are trying to perform one of the functions which is only	Load a CD-R or CD-RW.
	possible on a CD-R or CD-RW.
OPC ERROR	OPC cannot be performed. No recording or erasure can be	Replace the disc.
	performed on this disc.
OPC FULL	PCA is full. No recording or erasure can be performed on this	Replace the disc.
	disc.
PMA FULL	PMA is full. No recording or erasure can be performed on this	Replace the disc.
	disc.
SCMS PROTECT	Digital recording is prohibited in accordance with SCMS	See “SCMS” on page 51.
	regulations.
SHORT REMAIN	The remaining time on a disc is shorter than the playing time of
	the track you are trying to record.
SKIP FULL	21 skip marks are already recorded.
TNO FULL	99 tracks have been recorded. No further recording is possible.
UNLOCK	The external digital component is not connected properly or is	Check the connection, or
	turned off, or its signals are incompatible.	playback source.
UPDATE OPC	OPC is being performed before recording, if a disc is just	This is normal. After OPC is
	inserted in CD Recorder.	correctly done, recording starts.

English

– 52 –