JVC NX-CDR7 manual Available recording modes-REC Mode, High-Speed Recording, Finalization

Page 33

Available recording modes—REC MODE

CD Recorder provides a variety of the recording methods—called “Recording Modes.” Available recording modes vary according to the playback source and its playback status.

By pressing REC MODE after all preparation for recording is finished, you can select and use the following recording modes.

7When the source is 3-CD Changer —CD Synchronized Recording:

•CD Direct Recording (with or without finalization)—See page 33.

•First Track Recording—See page 35.

•Listening Edit Recording (with or without finalization)—See page 36.

During play, you can only perform a single track recording—See page 38.

7When the source is the external component

•Sound Synchronized Recording—See page 37.

When recording is stopped or finished, CD Synchronized Recording and Sound Synchronized Recording are canceled automatically.

Digital recording or analog recording?

CD Recorder automatically selects appropriate recording— either digital or analog—during CD Synchronized Recording. When digital source is selected as the playback sound, it will be recorded digitally unless it is a first-generation digital copy (see “SCMS (Serial Copy Management System)” on page 51). In this case, CD Recorder selects analog recording.

During CD Synchronized Recording

•Repeat Play will be canceled automatically.

•Auto track-marking is activated automatically.

Other recording methods

You can also use the REC PAUSE button to perform the recording. See “Recording Any Sound Source—Standard Recording” on page 31.

High-Speed Recording

When using some of the Recording Modes mentioned on the left column, this unit allows you to change the recording speed—normal speed and high speed.

For CD-R, high speed means 4 times normal speed and for CD-RW, 2 times normal speed.

When you select high speed for your recording, you cannot listen to the played-back sounds.

During high-speed recording

You cannot listen to any source, and therefore, cannot adjust the volume level. (“CANNOT LISTEN” will flash in the main display if you try to do.)

Finalization

This is the final process in recording on a CD-R or CD- RW. “Finalizing a disc” means writing the TOC (Table of Contents) on the recorded disc.

Only after this process is completed, a recorded CD-R or CD-RW can be played back on a CD player compatible with CD-R/CD-RW.

•It is also recommended to finalize a disc in order to play it back on 3-CD Changer.

To finalize a disc, see “Finalizing a Disc—CD-R/CD- RW” on page 38.

English

– 30 –

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Composé du CA-NXCDR7 et SP-NXCDR7 Consists of CA-NXCDR7 and SP-NXCDR7Mises en garde, précautions et indications diverses For Canada/pour le Canada For U.S.AContents Precautions IntroductionAbout This Manual Recording Precautions on Disc Playback and RecordingImportant notice Following discs cannot be used for recordingRemote Control Remote ControlLocation of the Buttons and Controls Press OPEN/CLOSE e to move down or up the sliding panel Main UnitDisplay Window Main UnitDisplay Window Daily 9 REC 0 Sleep Timer mode indicators 45Getting Started Connecting AntennasUnpacking FM antennaYou can connect the speakers using the speaker cords Connecting SpeakersAM antenna To connect an outdoor AM antennaTo remove the speaker grilles Connecting Other ComponentsTo connect an analog component such as a cassette deck To remove the speaker grille, inserting your fingers atTo connect digital components Remote sensor Putting the Batteries into the Remote ControlPress OPEN/CLOSE to move down or up the sliding panel Basic and Common OperationsSaving the Power Consumption while On Standby Turning On the PowerTo adjust the input level through the Line in jacks Selecting the Sources and Starting PlayAdjusting the Volume Changing the Display InformationReinforcing the Bass Sound To check the sound mode currently selected, press To use your own sound modeSelecting the Sound Modes Creating Your Own Sound Modes -MANUAL ModesListening to FM and AM Broadcasts Tuning into a Station Presetting StationsTo change the FM reception mode Tune into a station you want to preset Tuning into a Preset StationPress the number buttons to select a preset number Press SETDisc Playing Back Discs on 3-CD ChangerPlaying Back the Entire Discs-Continuous Play Loading DiscsUnfinalize appears in the main display Disc tray closesBasic Disc Operations To go to another track directly using the number buttonsPrograming the Playing Order of the Tracks -Program Play To start playing a disc during playback of another discTo check the program contents Playing at Random-Random PlayTo modify the program Other Convenient Functions To select the Continuous Play mode for 3-CD ChangerCD1 Play ? CD2 Play ?On the remote control only Press Pitch during play To adjust the playback speedTo cancel the prohibition and unlock the discs To prohibit disc ejection-Disc LockCDR Playing Back a Disc on CD RecorderRepeating Tracks-Repeat Play Playing Back a Disc-Normal PlayTo locate a particular point in a track during play On the unit only Press 0 CDRREC Level Recording on a CD-R/CD-RWBefore You Start Recording Optimum Power Control OPCSampling frequency rate converter Auto track-markingAvailable recording modes-REC Mode High-Speed RecordingFinalization To fade in and fade out the recording Recording Any Sound Source Standard RecordingWhen the source is 3-CD Changer To adjust the recording input levelWhen the source is other than 3-CD Changer To make a silent portion in your recordingRecording from 3-CD Changer -CD Synchronized Recording Using the Direct REC buttonCD Direct Recording Press Direct RECCD REC ? Select this to perform CD Direct Recording Using the REC Mode buttonFirst Track Recording Using the REC Mode button onlyRepeat to program other tracks Listening Edit RecordingTo stop during editing process and start recording, press During Listening Edit RecordingREC indicator flashes on the display for a while Recording starts automatically when the sound signals comeStart playback on the selected external component Finalizing a Disc-CD-R/CD-RW Recording a Single Track during Play1Tr. REC ? Press FinalizeOther Convenient CDR Functions Auto Track indicator lights on the display Current setting for auto-track marking appearsRecording Track Marks Manually -Manual Track-Marking About manual track-markingAutomatically-Auto-Track Space Converter Separating Recorded TracksTurning On or Off Sampling Frequency Rate Items appear as followsPress ¡ / ¢ or 4 / 1 to select the erasure start track Erasing Tracks Only for CD-RWPress Enter DisplayUnfinalizing a Disc Only for CD-RW Erasing All Tracks Only for CD-RWYou can erase all the recorded tracks on a CD-RWat a time Confirmation message appearsUsing the Timers Using Recording Timer Setting the ClockTo adjust the clock again How Recording Timer actually worksTo turn on the Recording Timer, press SET To turn on or off Recording Timer after its setting is doneIf you have selected FM or AM as the source If you have selected Line as the sourceHow Daily Timer actually works Using Daily TimerTo turn off the Daily Timer, press Cancel to select Daily Daily Timer indicator stops flashing and remains litTo turn on the Daily Timer, press SET If the unit is kept turned on when the timer on-time comesUsing Sleep Timer Using Auto Power OffHow Sleep Timer actually works To clean the disc MaintenanceTo clean the unit General Notes To play new discsGlossary Messages No sound is heard TroubleshootingSpecifications EN,FR JVC 0901MWMMDWJEM Page Page Page Page Page Page Page Page Page Page Page Page Page Page
Top Page Image Contents