Haier CWH24A, CWH12A, CWH18A manual Window Installation-Prepare the Cabinet, Back view, Bottom view

Window Installation-Prepare the Cabinet

7. Pull on the handle to slide the air conditioner out of the	CWH24A	A
cabinet. Place the air conditioner on cardboard.

B

A

A. Handle

NOTE: Do not lift, push, pull or remove any expanded polystyrene (foam) from inside the air conditioner. It is not packing material.

A.¹⁄₄" screws

B.Top channel

Back view A B

CWH12A

■

■

CWH18A

■Add two foam inserts to holes in top of cabinet where shipping screws were removed from the air conditioner cabinet.

A

A

B

A.Foam

A. ¹⁄₄" screws

B. Top channel

A. Curtain housing

B. Curtain guides

Bottom view

A. Curtain housing

B. Curtain guides

A

B

2.Extend the right-hand curtain outward so you may insert a ¹⁄₄" screw through the top hole in the curtain. Using a ¹⁄₄" screw, screw the curtain to the top hole in the air conditioner cabinet.

NOTE: This screw is required to correctly attach the curtain (top to bottom) to the air conditioner cabinet.

3.While the right-hand curtain is still extended, insert ¹⁄₄" screws through the other three holes in the curtain. Screw the curtain to all four holes in the air conditioner cabinet.

4.Slide the curtain housing into the curtain guides as far as it will go.

5.Repeat the above steps for the left-hand curtain.

7