9. Hardware Installation
Desktop Computer
•Use the power cord to connect the Fireface with any suitable power outlet.
•Connect computer and Fireface using the supplied
•Power on the computer. Switch on the Fireface when Windows shows the desktop.
Notebook
•Use the power cord to connect the Fireface with any suitable power outlet.
•Connect computer and Fireface using the supplied
•
10.Driver and Firmware
10.1 Driver Installation
After the Fireface has been switched on, (see 9. Hardware Installation) the green arrow symbol appears in the task bar (dialog Remove hardware) because Windows has detected an external hardware.
Insert the RME Driver CD into your
Windows now installs the driver of the Fireface 800 and registers it as a new audio device in the system. After a reboot, the symbols of mixer and Settings dialog will appear in the task bar (see above). The red Host error LED extinguishes.
In case the warning messages 'Digital signature not found', 'Do not install driver', 'not certified driver' or similar come up: Don't listen to Microsoft, listen to us and continue with the installation.
In case the Hardware Wizard does not show up automatically after installation of the card, do not attempt to install the drivers manually! An installation of drivers for
Possible reasons why a Fireface is not found automatically:
•The FireWire port is not active in the system (drivers of the FireWire PCI or CardBus card have not been installed)
•The FireWire cable is not, or not correctly inserted into the socket
•No power. After switching the Fireface on, at least the red Host error LED has to be lit.
16 | User's Guide Fireface 800 © RME |