Intel Fireface 800 manual Using external Effects Devices, Recording a Softwares playback

Page 80

Recording a Software's playback

In real world application, recording a software's output with another software will show the fol- lowing problem: The record software tries to open the same playback channel as the playback software (already active), or the playback one has already opened the input channel which should be used by the record software.

This problem can easily be solved. First make sure that all rules for proper multi-client operation are met (not using the same record/playback channels in both programs). Then route the play- back signal via TotalMix to a hardware output in the range of the record software, and activate it via Ctrl-mouse for recording.

Mixing several input signals into one record channel

In some cases it is useful to record several sources in only one track. For example when using two microphones when recording instruments and loudspeakers. TotalMix' Loopback mode saves an external mixing desk. Simply route/mix the input signals to the same output (third row), then re-define this output into a record channel via Ctrl-mouse – that's it. This way any number of input channels from different sources can be recorded into one single track.

33.6 Using external Effects Devices

With TotalMix a usage of external hardware - like effects devices - is easy and flexible.

Example 1: The singer (microphone input channel 10) shall have some reverb on his head- phones (outputs 9/10). A direct routing In 10 to Out 9/10 for monitoring had been set up already. The external reverb is connected to a free output, for example channel 8. In active mode Sub- mix View click on channel 8 in the bottom row. Drag the fader of input 10 to about 0 dB and the panorama fully to the right. Adjust the input level at the reverb unit to an optimal setting. Next the output of the reverb unit is connected to a free stereo input, for example 5/6. Use the To- talMix level meters to adjust a matching output level at the reverb unit. Now click on channels 9/10 in the bottom row, and move the fader of inputs 5/6 until the reverb effect gets a bit too loud in the headphones. Now click on channel 8 in the bottom row again and drag fader 10 down a bit until the mix of original signal and reverb is perfect for the singer.

The described procedure is completely identical to the one when using an analog mixing desk. There the signal of the singer is sent to an output (usually labeled Aux), from there to a reverb unit, sent back from the reverb unit as stereo wet signal (no original sound), back in through a stereo input (e.g. Effect return) and mixed to the monitoring signal. The only difference: The Aux sends on mixing desks are post-fader. Changing the level of the original signal causes a change of the effects level (here the reverb) too, so that both always have the same ratio.

Tip: Such a functionality is available in TotalMix via the right mouse button! Dragging the faders by use of the right mouse button causes all routings of the current input or playback channel to be changed in a relative way. This completely equals the function Aux post fader.

Example 2: Inserting an effects device can be done as above, even within the record path. Other than in the example above the reverb unit also sends the original signal, and there is no routing of input 10 directly to outputs 9/10. To insert an effects device like a Compressor/Limiter directly into the record path, the input signal of channel 10 is sent by TotalMix to any output, to the Compressor, back from the Compressor to any input. This input is now selected within the record software.

80

User's Guide Fireface 800 © RME

Image 80
Contents Most powerful FireWire audio interface ever TotalMix Bit / 192 kHz SyncAlignZLMSyncCheck SteadyClockGeneral Installation and Operation WindowsInstallation and Operation Mac OS Stand-Alone Operation, Connections and TotalMix Technical Reference Mains Important Safety InstructionsInstallation Users Guide Fireface 800 RME General Package Contents Brief Description and CharacteristicsIntroduction System RequirementsConnectors and Front Panel First Usage QuickstartPart Number Description AccessoriesQuick Start Trademarks WarrantyAppendix Users Guide Fireface 800 RME ISO CE / FCC ComplianceRoHS Users Guide Fireface 800 RME Installation and Operation Windows Hardware Installation Driver InstallationDriver and Firmware Desktop ComputerFirmware Update Driver UpdateDeinstalling the Drivers Configuring the Fireface Settings dialog GeneralPhantom Power Buffer SizeInputs Limit BandwidthClock Mode Word Clock OutSyncCheck OptionsSettings dialog DDS Clock Modes Synchronization Application examplesAvailable Settings Limit BandwidthOperation and Usage PlaybackMultichannel DVD-Playback AC-3/DTSAC-3 / DTS Low Latency under MME Buffer Size Adjustment Fireface Analog 1+2 Fireface Analog 1+2 MMEASIO-Multiclient Multi-Client and Multi-Channel using WDMMulti-client Operation Digital Recording Operation under Asio Analog RecordingKnown Problems Common ProblemsOperation under Gsif Gigasampler Interface Windows 2000/XPUsing more than one Fireface DIGICheck Hotline Troubleshooting 8 Adat channels don’t seem to workInstallation Diagrams Channel Routing Asio at 96 kHzChannel Routing MME at 96 kHz Users Guide Fireface 800 RME Mac OS X Installation and Operation Driver Firmware Update Configuring the Fireface Level Level OutAutoSync Ref Settings dialog DDS Clock Modes Synchronization Limit Bandwidth Midi doesnt work Mac OS X FAQRound about Driver Installation Repairing Disk Permissions FireWire CompatibilitySupported Sample Rates Various InformationMulticard Operation Possible causes for a Fireface not workingDiagram Channel Routing at 96 kHz Users Guide Fireface 800 RME Stand-Alone Operation, Connections and TotalMix Stand-alone Operation Analog Inputs Line RearMicrophone / Line Front Reference DBFS @ HeadroomSpeaker Emulation InstrumentDrive Line HeadphonesAnalog Outputs Spdif Digital ConnectionsAdat Special Characteristics of the Spdif Output MidiWord Clock Word Clock Input and OutputInput OutputTechnical Description and Usage Cabling and Termination OperationTotalMix Routing and Monitoring OverviewUsers Guide Fireface 800 RME User Interface Elements of a Channel Tour de TotalMixUsers Guide Fireface 800 RME Submix View Mute and SoloQuick Access Panel PresetsPreset Preset BanksMonitor Panel PreferencesStereo Pan Law Editing the NamesMain Monitor Hotkeys Menu Options Level Meter TotalMix The Matrix Elements of the Matrix ViewAsio Direct Monitoring Windows only TotalMix Super-FeaturesAdvantages of the Matrix Delete Routings Selection and Group-based OperationCopy Routings to other Channels Recording a Subgroup Loopback Recording a Softwares playback Using external Effects DevicesMixing several input signals into one record channel MS Processing Midi Remote Control MappingElement Meaning in TotalMixSetup Preset 3 38 / 56 / #G Preset 5 3A / 58 / #ASimple Midi Control Monitor Main 3E / 62 / DLoopback Detection Meaning in Fireface Stand-Alone Midi ControlMackie Control Protocol Element Meaning in Fireface Simple Midi ControlUsers Guide Fireface 800 RME Technical Reference Tech Info Technical Specifications AnalogDA Stereo Monitor Output Phones DigitalDA, Line Out 1-8, rear Digital Inputs Adat OpticalTransfer Modes Resolution / Bits per Sample Windows only Digital OutputsTechnical Background Lock and SyncCheckLatency and Monitoring How much Zero is Zero?Oversampling Sample frequency kHz 44.1 88.2 176.4 192Core Audios Safety Offset FireWire AudioSafety Buffer Number of Channels and Bus Load Limit Bandwidth 48 kHz 96 kHz 192 kHz FW-KanäleQS Quad Speed Analog DS Signal PortDS Double Speed Byte Mode Bit Type AES3-1992 IECNoise level in DS / QS Mode SteadyClockBlock Diagram Fireface Connector Pinouts TRS jacks of analog input / outputXLR jacks of analog inputs TRS Phones jack

Fireface 800 specifications

The Intel Fireface 800 is a powerful audio interface celebrated for its high-performance capabilities and versatility in both studio and live settings. Designed to cater to the needs of musicians, producers, and sound engineers, it stands out with its rich feature set and reliable technology.

One of the defining features of the Fireface 800 is its support for an impressive 26 input and 28 output channels. This extensive I/O configuration facilitates seamless integration with a wide variety of audio production setups, allowing users to record multiple instruments simultaneously or create complex routing scenarios. The unit also boasts top-notch analog and digital converters, ensuring pristine sound quality with a dynamic range that captures the nuances of any audio source.

In terms of connectivity, the Fireface 800 is equipped with both FireWire and USB ports, making it compatible with a range of computers and devices. The device utilizes the FireWire 800 protocol, which delivers higher data transfer rates compared to its predecessor. This efficient transfer capability is crucial for maintaining audio fidelity and reducing latency, making it an ideal choice for real-time monitoring and recording.

The Fireface 800 also features standalone operation capabilities, functioning independently of a computer when needed. This is particularly useful for live performances, where reliability and reduced setup complexity are essential. Users can easily connect microphones, instruments, and other equipment directly to the Fireface 800, making it a versatile tool for a variety of scenarios.

With its low-latency driver technology, the Fireface 800 ensures smooth performance even when handling demanding audio tasks. Its advanced ADAT and S/PDIF digital inputs and outputs provide further flexibility for connecting other gear, such as additional preamps and effects processors.

Another noteworthy characteristic of the Fireface 800 is its robust build quality. Designed for regular use in professional environments, the unit features a rugged metal chassis that can withstand the rigors of transport and daily use. This ensures longevity and consistent performance for audio professionals who depend on reliable equipment day in and day out.

In summary, the Intel Fireface 800 is a versatile and powerful audio interface that caters to a wide spectrum of audio production needs. With its extensive I/O capabilities, high-quality converters, reliable connectivity options, and robust design, it continues to be a popular choice among audio professionals striving for excellence in their work.