Intel Fireface 800 manual Configuring the Fireface

Page 42

22. Configuring the Fireface

22.1 Settings Dialog - General

Configuring the Fireface is done via its own settings dialog. The panel 'Settings' can be opened by clicking on the fire icon in the dock. The mixer of the Fireface (TotalMix) can be opened by clicking on the mixer icon in the dock.

The Fireface’s hardware offers a number of helpful, well thought-of practical functions and op- tions which affect how the card operates - it can be configured to suit many different require- ments. The following is available in the 'Settings' dialog:

•Input selection

•Level of analog I/Os

•Configuration of digital I/Os

•Synchronization behaviour

•State of input and output

•Current sample rate

Any changes performed in the Settings dialog are applied immediately - con- firmation (e.g. by exiting the dialog) is not required. However, settings should not be changed during playback or record if it can be avoided, as this can cause unwanted noises.

The status displays at the bottom of the dialog box give the user precise information about the current status of the system, and the status of all digital signals. SyncCheck indicates whether there is a valid signal (Lock, No Lock) for each input (Word Clock, ADAT1, ADAT2, SPDIF), or if there is a valid and synchronous signal (Sync). The AutoSync Ref display shows the input and frequency of the current sync source.

The string Errors is displayed only when transmission errors of PCI/FireWire are detected. The display will be reset on any start of a playback/record, i.e. set to zero and is thus no longer visi- ble. More information can be found in chapter 37.3.

42

User's Guide Fireface 800 © RME

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Most powerful FireWire audio interface ever TotalMix Bit / 192 kHz SyncAlignZLMSyncCheck SteadyClockInstallation and Operation Windows Installation and Operation Mac OSGeneral Stand-Alone Operation, Connections and TotalMix Technical Reference Important Safety Instructions InstallationMains Users Guide Fireface 800 RME General Introduction Package ContentsBrief Description and Characteristics System RequirementsConnectors and Front Panel First Usage QuickstartAccessories Quick StartPart Number Description Warranty AppendixTrademarks Users Guide Fireface 800 RME CE / FCC Compliance RoHSISO Users Guide Fireface 800 RME Installation and Operation Windows Driver and Firmware Hardware InstallationDriver Installation Desktop ComputerDriver Update Deinstalling the DriversFirmware Update Configuring the Fireface Settings dialog GeneralInputs Phantom PowerBuffer Size Limit BandwidthSyncCheck Clock ModeWord Clock Out OptionsSettings dialog DDS Clock Modes Synchronization Application examplesAvailable Settings Limit BandwidthOperation and Usage PlaybackDVD-Playback AC-3/DTS AC-3 / DTSMultichannel Low Latency under MME Buffer Size Adjustment Fireface Analog 1+2 Fireface Analog 1+2 MMEMulti-Client and Multi-Channel using WDM Multi-client OperationASIO-Multiclient Digital Recording Operation under Asio Analog RecordingOperation under Gsif Gigasampler Interface Known ProblemsCommon Problems Windows 2000/XPUsing more than one Fireface DIGICheck Hotline Troubleshooting 8 Adat channels don’t seem to workInstallation Diagrams Channel Routing Asio at 96 kHzChannel Routing MME at 96 kHz Users Guide Fireface 800 RME Mac OS X Installation and Operation Driver Firmware Update Configuring the Fireface Level Level OutAutoSync Ref Settings dialog DDS Clock Modes Synchronization Limit Bandwidth Mac OS X FAQ Round about Driver InstallationMidi doesnt work Supported Sample Rates Repairing Disk PermissionsFireWire Compatibility Various InformationMulticard Operation Possible causes for a Fireface not workingDiagram Channel Routing at 96 kHz Users Guide Fireface 800 RME Stand-Alone Operation, Connections and TotalMix Stand-alone Operation Microphone / Line Front Analog InputsLine Rear Reference DBFS @ HeadroomInstrument DriveSpeaker Emulation Headphones Analog OutputsLine Digital Connections AdatSpdif Special Characteristics of the Spdif Output MidiInput Word ClockWord Clock Input and Output OutputTechnical Description and Usage Cabling and Termination OperationTotalMix Routing and Monitoring OverviewUsers Guide Fireface 800 RME User Interface Elements of a Channel Tour de TotalMixUsers Guide Fireface 800 RME Submix View Mute and SoloQuick Access Panel PresetsPreset Preset BanksMonitor Panel PreferencesEditing the Names Main MonitorStereo Pan Law Hotkeys Menu Options Level Meter TotalMix The Matrix Elements of the Matrix ViewTotalMix Super-Features Advantages of the MatrixAsio Direct Monitoring Windows only Selection and Group-based Operation Copy Routings to other ChannelsDelete Routings Recording a Subgroup Loopback Using external Effects Devices Mixing several input signals into one record channelRecording a Softwares playback MS Processing Element Midi Remote ControlMapping Meaning in TotalMixSetup Simple Midi Control Preset 3 38 / 56 / #GPreset 5 3A / 58 / #A Monitor Main 3E / 62 / DLoopback Detection Stand-Alone Midi Control Mackie Control ProtocolMeaning in Fireface Element Meaning in Fireface Simple Midi ControlUsers Guide Fireface 800 RME Technical Reference Tech Info Technical Specifications AnalogDigital DA, Line Out 1-8, rearDA Stereo Monitor Output Phones Digital Inputs Adat OpticalTransfer Modes Resolution / Bits per Sample Windows only Digital OutputsTechnical Background Lock and SyncCheckOversampling Latency and MonitoringHow much Zero is Zero? Sample frequency kHz 44.1 88.2 176.4 192FireWire Audio Safety BufferCore Audios Safety Offset Number of Channels and Bus Load Limit Bandwidth 48 kHz 96 kHz 192 kHz FW-KanäleAnalog DS Signal Port DS Double SpeedQS Quad Speed Byte Mode Bit Type AES3-1992 IECNoise level in DS / QS Mode SteadyClockBlock Diagram Fireface XLR jacks of analog inputs Connector PinoutsTRS jacks of analog input / output TRS Phones jack

Fireface 800 specifications

The Intel Fireface 800 is a powerful audio interface celebrated for its high-performance capabilities and versatility in both studio and live settings. Designed to cater to the needs of musicians, producers, and sound engineers, it stands out with its rich feature set and reliable technology.

One of the defining features of the Fireface 800 is its support for an impressive 26 input and 28 output channels. This extensive I/O configuration facilitates seamless integration with a wide variety of audio production setups, allowing users to record multiple instruments simultaneously or create complex routing scenarios. The unit also boasts top-notch analog and digital converters, ensuring pristine sound quality with a dynamic range that captures the nuances of any audio source.

In terms of connectivity, the Fireface 800 is equipped with both FireWire and USB ports, making it compatible with a range of computers and devices. The device utilizes the FireWire 800 protocol, which delivers higher data transfer rates compared to its predecessor. This efficient transfer capability is crucial for maintaining audio fidelity and reducing latency, making it an ideal choice for real-time monitoring and recording.

The Fireface 800 also features standalone operation capabilities, functioning independently of a computer when needed. This is particularly useful for live performances, where reliability and reduced setup complexity are essential. Users can easily connect microphones, instruments, and other equipment directly to the Fireface 800, making it a versatile tool for a variety of scenarios.

With its low-latency driver technology, the Fireface 800 ensures smooth performance even when handling demanding audio tasks. Its advanced ADAT and S/PDIF digital inputs and outputs provide further flexibility for connecting other gear, such as additional preamps and effects processors.

Another noteworthy characteristic of the Fireface 800 is its robust build quality. Designed for regular use in professional environments, the unit features a rugged metal chassis that can withstand the rigors of transport and daily use. This ensures longevity and consistent performance for audio professionals who depend on reliable equipment day in and day out.

In summary, the Intel Fireface 800 is a versatile and powerful audio interface that caters to a wide spectrum of audio production needs. With its extensive I/O capabilities, high-quality converters, reliable connectivity options, and robust design, it continues to be a popular choice among audio professionals striving for excellence in their work.
Top Page Image Contents