Intel Fireface 800 manual Quick Access Panel, Presets

Page 69

31.7 The Quick Access Panel

This section includes additional options, further improving the handling of TotalMix. The Master buttons for Mute and Solo have already been described, they allow for group-based working with these functions.

In the View section the single mixer rows can be made visible or invisible. If the inputs are not needed for a pristine playback mix, the whole upper row falls out of the picture after a click on the Input button. If the hardware outputs don't interest you either, the window can thus be re- duced to the playback channels to save space. All combinations are possible and allowed.

As described earlier, Submix sets all routing windows to the same selection. Deactivating Sub- mix automatically recalls the previous view. The mixer can be made smaller horizontally and vertically. This way TotalMix can be made substantially smaller and space-saving on the desk- top/screen, if you have to monitor or set only a few channels or level meters.

The Presets are one of the mightiest and most useful features of TotalMix. Be- hind the eight buttons, eight files are hidden (see next chapter). These contain the complete mixer state. All faders and other settings follow the changing of preset(s) in real-time, just by a single mouse click. The Save button allows for storing the present settings in any preset. You can change back and forth be- tween a signal distribution, complete input monitoring, a stereo and mono mix, and various submixes without any problem.

Also here, RME's love for details can be seen. If any parameter is being altered after loading a preset (e. g. moving a fader), the preset display flashes in order to announce that something has been changed, still showing which state the pre- sent mix is based on.

If no preset button is lit, another preset had been loaded via the File menu and Open file. Mixer settings can of course be saved the usual way, and have long file names.

Instead of single presets a complete bank of (8) presets can be loaded at once. Advantage: The names defined for the preset buttons will be stored and loaded automatically.

Up to three Firefaces can be used simultaneously. The Unit buttons switch between the de- vices. Holding down Ctrl while clicking on button Unit 2 or Unit 3 will open another TotalMix window.

31.8 Presets

TotalMix includes eight factory presets, stored within the program. The user presets can be changed at any time, because TotalMix stores and reads the changed presets from the files preset11.fmx to preset81.fmx, located in Windows' hidden directory Documents and Settings, <Username>, Local Settings, Application Data, RME TotalMix. On the Mac the location is in the folder User, <Username>, Library / Preferences / Fireface. The first number indicates the cur- rent preset, the second number the current unit.

This method offers two major advantages:

•Presets modified by the user will not be overwritten when reinstalling or updating the driver

•The factory presets remain unchanged, and can be reloaded any time.

User's Guide Fireface 800 © RME

69

Page 68 Page 70
Image 69
Page 68 Page 70
Contents TotalMix Bit / 192 kHz SyncAlignZLMSyncCheck SteadyClock Most powerful FireWire audio interface everInstallation and Operation Windows Installation and Operation Mac OSGeneral Stand-Alone Operation, Connections and TotalMix Technical Reference Important Safety Instructions InstallationMains Users Guide Fireface 800 RME General Brief Description and Characteristics Package ContentsIntroduction System RequirementsFirst Usage Quickstart Connectors and Front PanelAccessories Quick StartPart Number Description Warranty AppendixTrademarks Users Guide Fireface 800 RME CE / FCC Compliance RoHSISO Users Guide Fireface 800 RME Installation and Operation Windows Driver Installation Hardware InstallationDriver and Firmware Desktop ComputerDriver Update Deinstalling the DriversFirmware Update Settings dialog General Configuring the FirefaceBuffer Size Phantom PowerInputs Limit BandwidthWord Clock Out Clock ModeSyncCheck OptionsSettings dialog DDS Application examples Clock Modes SynchronizationLimit Bandwidth Available SettingsPlayback Operation and UsageDVD-Playback AC-3/DTS AC-3 / DTSMultichannel Low Latency under MME Buffer Size Adjustment Fireface Analog 1+2 MME Fireface Analog 1+2Multi-Client and Multi-Channel using WDM Multi-client OperationASIO-Multiclient Digital Recording Analog Recording Operation under AsioCommon Problems Known ProblemsOperation under Gsif Gigasampler Interface Windows 2000/XPUsing more than one Fireface DIGICheck 8 Adat channels don’t seem to work Hotline TroubleshootingInstallation Channel Routing Asio at 96 kHz DiagramsChannel Routing MME at 96 kHz Users Guide Fireface 800 RME Mac OS X Installation and Operation Driver Firmware Update Configuring the Fireface Level Out LevelAutoSync Ref Settings dialog DDS Clock Modes Synchronization Limit Bandwidth Mac OS X FAQ Round about Driver InstallationMidi doesnt work FireWire Compatibility Repairing Disk PermissionsSupported Sample Rates Various InformationPossible causes for a Fireface not working Multicard OperationDiagram Channel Routing at 96 kHz Users Guide Fireface 800 RME Stand-Alone Operation, Connections and TotalMix Stand-alone Operation Line Rear Analog InputsMicrophone / Line Front Reference DBFS @ HeadroomInstrument DriveSpeaker Emulation Headphones Analog OutputsLine Digital Connections AdatSpdif Midi Special Characteristics of the Spdif OutputWord Clock Input and Output Word ClockInput OutputTechnical Description and Usage Operation Cabling and TerminationOverview TotalMix Routing and MonitoringUsers Guide Fireface 800 RME User Interface Tour de TotalMix Elements of a ChannelUsers Guide Fireface 800 RME Mute and Solo Submix ViewPresets Quick Access PanelPreset Banks PresetPreferences Monitor PanelEditing the Names Main MonitorStereo Pan Law Hotkeys Menu Options Level Meter Elements of the Matrix View TotalMix The MatrixTotalMix Super-Features Advantages of the MatrixAsio Direct Monitoring Windows only Selection and Group-based Operation Copy Routings to other ChannelsDelete Routings Recording a Subgroup Loopback Using external Effects Devices Mixing several input signals into one record channelRecording a Softwares playback MS Processing Mapping Midi Remote ControlElement Meaning in TotalMixSetup Preset 5 3A / 58 / #A Preset 3 38 / 56 / #GSimple Midi Control Monitor Main 3E / 62 / DLoopback Detection Stand-Alone Midi Control Mackie Control ProtocolMeaning in Fireface Simple Midi Control Element Meaning in FirefaceUsers Guide Fireface 800 RME Technical Reference Tech Info Analog Technical SpecificationsDigital DA, Line Out 1-8, rearDA Stereo Monitor Output Phones Adat Optical Digital InputsDigital Outputs Transfer Modes Resolution / Bits per Sample Windows onlyLock and SyncCheck Technical BackgroundHow much Zero is Zero? Latency and MonitoringOversampling Sample frequency kHz 44.1 88.2 176.4 192FireWire Audio Safety BufferCore Audios Safety Offset Limit Bandwidth 48 kHz 96 kHz 192 kHz FW-Kanäle Number of Channels and Bus LoadAnalog DS Signal Port DS Double SpeedQS Quad Speed Type AES3-1992 IEC Byte Mode BitSteadyClock Noise level in DS / QS ModeBlock Diagram Fireface TRS jacks of analog input / output Connector PinoutsXLR jacks of analog inputs TRS Phones jack

Fireface 800 specifications

The Intel Fireface 800 is a powerful audio interface celebrated for its high-performance capabilities and versatility in both studio and live settings. Designed to cater to the needs of musicians, producers, and sound engineers, it stands out with its rich feature set and reliable technology.

One of the defining features of the Fireface 800 is its support for an impressive 26 input and 28 output channels. This extensive I/O configuration facilitates seamless integration with a wide variety of audio production setups, allowing users to record multiple instruments simultaneously or create complex routing scenarios. The unit also boasts top-notch analog and digital converters, ensuring pristine sound quality with a dynamic range that captures the nuances of any audio source.

In terms of connectivity, the Fireface 800 is equipped with both FireWire and USB ports, making it compatible with a range of computers and devices. The device utilizes the FireWire 800 protocol, which delivers higher data transfer rates compared to its predecessor. This efficient transfer capability is crucial for maintaining audio fidelity and reducing latency, making it an ideal choice for real-time monitoring and recording.

The Fireface 800 also features standalone operation capabilities, functioning independently of a computer when needed. This is particularly useful for live performances, where reliability and reduced setup complexity are essential. Users can easily connect microphones, instruments, and other equipment directly to the Fireface 800, making it a versatile tool for a variety of scenarios.

With its low-latency driver technology, the Fireface 800 ensures smooth performance even when handling demanding audio tasks. Its advanced ADAT and S/PDIF digital inputs and outputs provide further flexibility for connecting other gear, such as additional preamps and effects processors.

Another noteworthy characteristic of the Fireface 800 is its robust build quality. Designed for regular use in professional environments, the unit features a rugged metal chassis that can withstand the rigors of transport and daily use. This ensures longevity and consistent performance for audio professionals who depend on reliable equipment day in and day out.

In summary, the Intel Fireface 800 is a versatile and powerful audio interface that caters to a wide spectrum of audio production needs. With its extensive I/O capabilities, high-quality converters, reliable connectivity options, and robust design, it continues to be a popular choice among audio professionals striving for excellence in their work.
Top Page Image Contents