Honeywell TE831W-2 user manual Selects the next available window counter-clockwise

Page 13


A. UP	- Selects the next available window counter-clockwise
	- Increases parameters
	-If depressed and held, activates an atomic time signal search
B. DOWN	- Selects the next available window clockwise
	- Decreases parameters
	-If depressed and held, activates all remote sensors signal search
C. SET	- Alternates the parameters for the selected window
	- If depressed and held, enters into the programming mode or
	changes parameter’s units
	- Pressed again closes programming mode and confirms selected
	parameters
D. CHANNEL	- Manually selects the channel # for receiving temperature and
	humidity sensor data
	- Enables the temperature and humidity channel auto-scan mode
E. MEMORY	- Records: moon phase, temperature, humidity, rainfall and wind
	records. Then stores in memory
	- Moon phase: Determined by the day of month interval
	- Sets and stores pressure & altitude units in Memory
F. HISTORY	- Allows displaying the sea-level pressure history

G ALARM/CHART	- Displays alarm times and programmed alerts for temperature,
	rainfall and wind.
	- Press and hold, to enter the alarm/alert programming mode
	- Press and hold in pressure and forecast window, to view
	different bar charts
H. SENSOR	- Sets the light sensor to: automatic, on or off
– AUTO, ON, OFF

I. SENSITIVITY	- Adjusts the automatic light sensor sensitivity
– HIGH/LOW

J LIGHT/SNOOZE	- Illuminates the display backlight for 5 seconds
	- Activates Snooze delay for alarms (programmable 1 to 15
	minutes)
K. AC/ DC	- Connects main unit to the power outlet through the AC to 7.5V
ADAPTOR INPUT	DC adapter provided
ADAPTOR INPUT

L. USB Port	- USB Port provides PC connectivity

13

Image 13

Contents Honeywell Appendix City Codes Specifications Table of ContentsInstallation Standard Package ContentsIntroduction Before you begin Thermo-Hygrometer Sensors TS33C Battery installationRain Gauge TS906 Placement tipsMounting Battery installation Anemometer wind sensor TS805 Assembly Battery CoverTime Main UnitWeather Avoid placing the main unit in the following areas DisplayButtons and Controls Selects the next available window counter-clockwise Initial Set up Selecting Clock and Alarm Window Clock and Alarms Window Clock and Calendar DisplaysInitial Settings City, Time, Date and Language Operation and Window SelectionCustom Weather Station Settings Display Select Pressure and Weather Forecast Window Pressure and Weather Forecast WindowPressure and Altitude Information Changing or Setting Altitude Changing or Setting Sea Level PressureChanging Pressure and Altitude Parameters Viewing the Moon Phase History Viewing the Pressure, Temperature and Humidity Bar ChartsMoon Phase Diagram Viewing the Sea Level Pressure HistoryWeather Forecast Displays Temperature and Humidity Window Viewing Temperature and Humidity for each Channel Display Selecting Temperature and Humidity WindowTemperature and Dew Point Displays Temperature in Celsius or FahrenheitDisabling Temperature Alarm levels Programming Upper and Lower limits for Temperature AlarmViewing the Max/Min Channel Temperature and Humidity Rain WindowSetting Rain Display inches or mm Rainfall Memory ResetSetting up Daily Rainfall Alert Viewing Rain StatisticsSetting Wind Speed in km/h, mph, m/s or knots Configuring Wind DisplayResetting the Wind Statistics Memory Selecting Wind WindowProgramming Time Alarms Enable/Disable Time AlarmsWind Alert programming Disabling the Wind AlertDisable alarms Disable/Enable Snooze functionAtomic Time Reception Maintenance Memory Reset ProcedureRemote Sensor Status Activate Search for Remote SensorsTroubleshooting Weather forecast is inaccurate PrecautionsAppendix City Codes Specifications Wind Speed Power 12 AA Batteries includedRainfall Hardware Requirement for WeatherCapture PC softwareWeight without batteries Battery life alkalineDimensions Declaration of Conformity