Honeywell TE831W-2 user manual Initial Set up, Connecting the Weather Station to a PC

Page 14

Initial Set up

1.Power up each of the remote sensors as instructed in previous sections.( Remove clear protective plastic slips from the battery compartments)

2.Then power up the main display.

3.Once the main unit is powered, the display will briefly show all available LCD segments for a moment.

4.IMPORTANT: Do not press any buttons during the set up process which typically takes about 5-10 minutes.

The display functions will be automatically set including local altitude and pressure parameters. The display will show the

pressure icon and “inHg” (inches of Mercury) flashing. You will know that the unit is finished self-adjustment when the display shows the default settings for the pressure and altitude (sea level) Indoor/outdoor temperature and humidity readings, remote sensors readings, etc.

Many settings can be changed or customized to your preference, after the display has stabilized

•The pressure parameters during Initial Setup (See Pressure and Weather Forecast Window)

•The time, the date and the weekday language (Clock and Alarm Window)

•The location data (City) will determine the time zone

IMPORTANT: If after the initial setup, the altitude or other parameters are not displayed, or dotted lines are displayed, for example (- - -) you may have to restart the main unit to reset it..

Note: It is a normal unit operation that history chart is constantly moving on the main unit display

Connecting the Weather Station to a PC

To collect and manipulate data from your weather station you may connect the main unit to the computer via USB cable. Proceed in the following order:

•Make sure all sensors have batteries installed and the main unit is plugged in to the wall power outlet through the AC/DC adapter provided

•Insert the CD-ROM into available drive and install the software following instructions of the installation wizard.

•Connect the main unit to the computer USB port using the USB cable provided.

•Open installed software package: double-click the icon on the computer desktop

You may customize software screen by selecting the weather parameters to be displayed, units for these weather parameters, location and other user-definable elements.

When determining data transfer interval from the main unit to your computer consider the time duration for each data point. For example if you select 5 minutes, each point on the graph will be placed every 5 minutes. If you will select 3 hours, then the graph trend will take at least 24 hours to show 8 data points.

The software works when main display unit is connected to the PC. If you set data transfer interval to 1 hour, you will need to connect your main unit display to the PC at least once a week, otherwise your will loose some data.

You can use Print Screen option to create pictures and send them by E-Mail and use them on your website 14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Honeywell Table of Contents Appendix City Codes SpecificationsIntroduction Standard Package ContentsInstallation Before you begin Battery installation Thermo-Hygrometer Sensors TS33CMounting Placement tipsRain Gauge TS906 Battery installation Anemometer wind sensor TS805 Battery Cover AssemblyWeather Main UnitTime Display Avoid placing the main unit in the following areasButtons and Controls Selects the next available window counter-clockwise Initial Set up Initial Settings City, Time, Date and Language Clock and Alarms Window Clock and Calendar DisplaysSelecting Clock and Alarm Window Operation and Window SelectionCustom Weather Station Settings Pressure and Altitude Information Pressure and Weather Forecast WindowDisplay Select Pressure and Weather Forecast Window Changing Pressure and Altitude Parameters Changing or Setting Sea Level PressureChanging or Setting Altitude Moon Phase Diagram Viewing the Pressure, Temperature and Humidity Bar ChartsViewing the Moon Phase History Viewing the Sea Level Pressure HistoryWeather Forecast Displays Temperature and Humidity Window Temperature and Dew Point Displays Display Selecting Temperature and Humidity WindowViewing Temperature and Humidity for each Channel Temperature in Celsius or FahrenheitViewing the Max/Min Channel Temperature and Humidity Programming Upper and Lower limits for Temperature AlarmDisabling Temperature Alarm levels Rain WindowSetting up Daily Rainfall Alert Rainfall Memory ResetSetting Rain Display inches or mm Viewing Rain StatisticsResetting the Wind Statistics Memory Configuring Wind DisplaySetting Wind Speed in km/h, mph, m/s or knots Selecting Wind WindowWind Alert programming Enable/Disable Time AlarmsProgramming Time Alarms Disabling the Wind AlertAtomic Time Reception Disable/Enable Snooze functionDisable alarms Remote Sensor Status Memory Reset ProcedureMaintenance Activate Search for Remote SensorsTroubleshooting Precautions Weather forecast is inaccurateAppendix City Codes Specifications Rainfall Power 12 AA Batteries includedWind Speed Hardware Requirement for WeatherCapture PC softwareDimensions Battery life alkalineWeight without batteries Declaration of Conformity
Top Page Image Contents