Honeywell TE831W-2 Wind Speed, Rainfall, Hardware Requirement for WeatherCapture PC software

Page 32

Range: 0° to 360°

Resolution: 22.5°

Accuracy: 11.25°

Starting Threshold: 3mph (4.8 Km/h)

Transmitting interval: 33 seconds

Operating Range: 100 feet (30 m)

Wind Speed

Range: 0 to 199.9mph (199.9 Km/h, 173.7 Knots, 89.3 m/s)

Resolution: 0.1mph (0.16 Km/h)

Accuracy: (2mph + 5%)

Starting Threshold: 3mph (4.8 Km/h)

Wind/Gust Speed Display Update Interval: 33 seconds

Wind/Gust Sampling Interval: 11 seconds

Operating Range: 100 feet (30 m)

Rainfall

1h/24h/yesterday range: 0 to 78.73 inch (0 to 1999.9 mm)

Last week/ last month range: 0 to 787.3 inch (0 to 19999 mm)

Resolution: 0.03 inch (0.6578 mm)

Accuracy: +/- 5% +/- 0.03 inch (+/-5%mm +/-0.6875)

Transmitting Interval: 183 seconds

Operating Range: 100 feet (30 m)

Hardware Requirement for WeatherCapture PC software

Operating System: Windows 98/NT/2000/ME, XP or Vista

Memory size: Ram 128 MB or more

Hard disk size: 100 MB free space or more

Media Device: 1 x CD-Rom drive

Available serial USB port

Power (12 AA Batteries) - included

Main unit: 4 x UM-3 or AA 1.5V battery; 7.5V AC/DC power adaptor (200mA; center pin positive)

(2)Remote Thermo Hygrometer: 2 x UM-3 or AA 1.5V battery

Remote Anemometer: 2 x UM-3 or AA 1.5V battery

Remote Rain Gauge: 2 x UM-3 or AA 1.5V battery

32

Image 32

Contents Honeywell Table of Contents Appendix City Codes SpecificationsIntroduction Standard Package ContentsInstallation Before you begin Battery installation Thermo-Hygrometer Sensors TS33CMounting Placement tipsRain Gauge TS906 Battery installation Anemometer wind sensor TS805 Battery Cover AssemblyWeather Main UnitTime Display Avoid placing the main unit in the following areasButtons and Controls Selects the next available window counter-clockwise Initial Set up Clock and Alarms Window Clock and Calendar Displays Selecting Clock and Alarm WindowInitial Settings City, Time, Date and Language Operation and Window SelectionCustom Weather Station Settings Pressure and Altitude Information Pressure and Weather Forecast WindowDisplay Select Pressure and Weather Forecast Window Changing Pressure and Altitude Parameters Changing or Setting Sea Level PressureChanging or Setting Altitude Viewing the Pressure, Temperature and Humidity Bar Charts Viewing the Moon Phase HistoryMoon Phase Diagram Viewing the Sea Level Pressure HistoryWeather Forecast Displays Temperature and Humidity Window Display Selecting Temperature and Humidity Window Viewing Temperature and Humidity for each ChannelTemperature and Dew Point Displays Temperature in Celsius or FahrenheitProgramming Upper and Lower limits for Temperature Alarm Disabling Temperature Alarm levelsViewing the Max/Min Channel Temperature and Humidity Rain WindowRainfall Memory Reset Setting Rain Display inches or mmSetting up Daily Rainfall Alert Viewing Rain StatisticsConfiguring Wind Display Setting Wind Speed in km/h, mph, m/s or knotsResetting the Wind Statistics Memory Selecting Wind WindowEnable/Disable Time Alarms Programming Time AlarmsWind Alert programming Disabling the Wind AlertAtomic Time Reception Disable/Enable Snooze functionDisable alarms Memory Reset Procedure MaintenanceRemote Sensor Status Activate Search for Remote SensorsTroubleshooting Precautions Weather forecast is inaccurateAppendix City Codes Specifications Power 12 AA Batteries included Wind SpeedRainfall Hardware Requirement for WeatherCapture PC softwareDimensions Battery life alkalineWeight without batteries Declaration of Conformity