Honeywell TE831W-2 Display Selecting Temperature and Humidity Window, Channel Auto-Scan Display

Page 21

remote channels Thermo-Hygrometer remote battery status is monitored on the main unit.

Display:

Selecting Temperature and Humidity Window

Press main unit UP or DOWN arrow buttons until the IN icon on the upper right will flash.

Viewing Temperature and Humidity for each Channel

At any time simply press the CHANNEL button to recall a different remote thermo hygrometer channel.

Channel Auto-Scan Display:

To enable automatic scan of all available channels, press and hold CHANNEL button, until the icon is displayed. Channels will be alternately displayed with a 5-second delay.

Temperature and Dew Point Displays

With Temperature and Humidity icon flashing, press the SET button to alternate between “temperature and relative humidity” or “dew point and relative humidity.”

Temperature in Celsius or Fahrenheit

With Temperature and Humidity icon flashing, press and hold the SET button to alternate between temperature in Celsius (ºC) or Fahrenheit (ºF).

Temperature Alarm

With Temperature and Humidity icon flashing, press the ALARM/CHART button once every time to recall a current

temperature for the corresponding channel, the upper temperature alarm limit with icon, or lower temperature alarm limit

21

Image 21

Contents Honeywell Appendix City Codes Specifications Table of ContentsStandard Package Contents InstallationIntroduction Before you begin Thermo-Hygrometer Sensors TS33C Battery installationPlacement tips Rain Gauge TS906Mounting Battery installation Anemometer wind sensor TS805 Assembly Battery CoverMain Unit TimeWeather Avoid placing the main unit in the following areas DisplayButtons and Controls Selects the next available window counter-clockwise Initial Set up Selecting Clock and Alarm Window Clock and Alarms Window Clock and Calendar DisplaysInitial Settings City, Time, Date and Language Operation and Window SelectionCustom Weather Station Settings Pressure and Weather Forecast Window Display Select Pressure and Weather Forecast WindowPressure and Altitude Information Changing or Setting Sea Level Pressure Changing or Setting AltitudeChanging Pressure and Altitude Parameters Viewing the Moon Phase History Viewing the Pressure, Temperature and Humidity Bar ChartsMoon Phase Diagram Viewing the Sea Level Pressure HistoryWeather Forecast Displays Temperature and Humidity Window Viewing Temperature and Humidity for each Channel Display Selecting Temperature and Humidity WindowTemperature and Dew Point Displays Temperature in Celsius or FahrenheitDisabling Temperature Alarm levels Programming Upper and Lower limits for Temperature AlarmViewing the Max/Min Channel Temperature and Humidity Rain WindowSetting Rain Display inches or mm Rainfall Memory ResetSetting up Daily Rainfall Alert Viewing Rain StatisticsSetting Wind Speed in km/h, mph, m/s or knots Configuring Wind DisplayResetting the Wind Statistics Memory Selecting Wind WindowProgramming Time Alarms Enable/Disable Time AlarmsWind Alert programming Disabling the Wind AlertDisable/Enable Snooze function Disable alarmsAtomic Time Reception Maintenance Memory Reset ProcedureRemote Sensor Status Activate Search for Remote SensorsTroubleshooting Weather forecast is inaccurate PrecautionsAppendix City Codes Specifications Wind Speed Power 12 AA Batteries includedRainfall Hardware Requirement for WeatherCapture PC softwareBattery life alkaline Weight without batteriesDimensions Declaration of Conformity