Honeywell TE831W-2 user manual Battery Cover, Assembly

Page 9

A

D

G

C

F

E

B

H

E. WIND CUPS SHAFT

Holds wind cups on the anemometer arm

F. BATTERY COMPARTMENT

Holds 2 AA-size batteries

G. WALL MOUNT SCREW OPENINGS

Allows securing the anemometer in place

H. BATTERY COVER

Secures battery compartment on the anemometer base

Assembly

•Slide the wind cups on to the anemometer rotating shaft. Do not use force.

•Insert the longer arm of the Allen Wrench (provided) into the wind cup set screw opening. Feel the head of the set screw inside the wind cups and tighten carefully the set screw securing the wind cups to the rotating shaft.

•Test to ensure cups are securely fastened to the shaft and cannot be removed

Battery installation

•Remove four (4) screws from the battery compartment with a small Phillips screwdriver.

•Open the battery compartment and install 2 “AA” size alkaline batteries (not included) matching the polarities shown.

•Do not close battery compartment yet as you need to make sure that the anemometer sends the signal to the main

9

Image 9

Contents Honeywell Appendix City Codes Specifications Table of ContentsStandard Package Contents InstallationIntroduction Before you begin Thermo-Hygrometer Sensors TS33C Battery installationPlacement tips Rain Gauge TS906Mounting Battery installation Anemometer wind sensor TS805 Assembly Battery CoverMain Unit TimeWeather Avoid placing the main unit in the following areas DisplayButtons and Controls Selects the next available window counter-clockwise Initial Set up Selecting Clock and Alarm Window Clock and Alarms Window Clock and Calendar DisplaysInitial Settings City, Time, Date and Language Operation and Window SelectionCustom Weather Station Settings Pressure and Weather Forecast Window Display Select Pressure and Weather Forecast WindowPressure and Altitude Information Changing or Setting Sea Level Pressure Changing or Setting AltitudeChanging Pressure and Altitude Parameters Viewing the Moon Phase History Viewing the Pressure, Temperature and Humidity Bar ChartsMoon Phase Diagram Viewing the Sea Level Pressure HistoryWeather Forecast Displays Temperature and Humidity Window Viewing Temperature and Humidity for each Channel Display Selecting Temperature and Humidity WindowTemperature and Dew Point Displays Temperature in Celsius or FahrenheitDisabling Temperature Alarm levels Programming Upper and Lower limits for Temperature AlarmViewing the Max/Min Channel Temperature and Humidity Rain WindowSetting Rain Display inches or mm Rainfall Memory ResetSetting up Daily Rainfall Alert Viewing Rain StatisticsSetting Wind Speed in km/h, mph, m/s or knots Configuring Wind DisplayResetting the Wind Statistics Memory Selecting Wind WindowProgramming Time Alarms Enable/Disable Time AlarmsWind Alert programming Disabling the Wind AlertDisable/Enable Snooze function Disable alarmsAtomic Time Reception Maintenance Memory Reset ProcedureRemote Sensor Status Activate Search for Remote SensorsTroubleshooting Weather forecast is inaccurate PrecautionsAppendix City Codes Specifications Wind Speed Power 12 AA Batteries includedRainfall Hardware Requirement for WeatherCapture PC softwareBattery life alkaline Weight without batteriesDimensions Declaration of Conformity