Honeywell TE831W-2 user manual Custom Weather Station Settings

Page 16

•With the Clock and Alarm icon flashing, press and hold SET button until the day of week language abbreviation “ENG” will flash.

•Press UP or DOWN arrow button to select the desired language for day of the week in English, German, French, Italian, Spanish or Dutch

•Press SET button to confirm selection.

•Select the desired City Code flashing (LAX is Los Angeles for example) for your area by pressing UP or DOWN. This will set the unit to the appropriate time zone for your location. Refer to table, back of this book, for a list of available cities.

•Press SET to confirm the city selection.

•Press UP or DOWN to select the correct year.

•Press SET to confirm year selection.

•Press UP or DOWN to select the correct month.

•Press SET to confirm selection.

•Press UP or DOWN to select the correct date.

•Press SET to confirm selection.

•Press UP or DOWN to select the correct order of month & year. (M…D)

•Press SET to confirm selection.

•Press UP or DOWN to select either 12 hour(AM/PM) or 24 hour time (24:00) format

•Press SET to confirm selection.

•Press UP or DOWN to select the correct hour.

•Press SET to confirm selection.

•Press UP or DOWN to select the correct minute.

•Press SET to confirm selection and to complete the initial programming for your weather station.

After programming is completed, the display will return to the default Clock and Alarm Window. Note: If you do not complete this sequence your entries will be lost.

Note: Press and hold SET anytime during the setup to return to normal Clock and Alarm Window and all previous settings will be cancelled.

Custom Weather Station Settings

The basic operation of your weather station has been designed to work right out of the box 10 minutes after power is provided to the main unit. To use your station, you will have to complete the steps identified under INITIAL SETUP while this section of the manual will provide you with additional operational details and suggestions for custom settings and alarms including:

•The time alarms (Clock and Alarm Window)

•The temperature alarms (Temperature and Humidity Window)

•Daily rainfall alarm (Rain Window)

•Wind alarms (Wind Window)

16

Image 16

Contents Honeywell Table of Contents Appendix City Codes SpecificationsInstallation Standard Package ContentsIntroduction Before you begin Battery installation Thermo-Hygrometer Sensors TS33CRain Gauge TS906 Placement tipsMounting Battery installation Anemometer wind sensor TS805 Battery Cover AssemblyTime Main UnitWeather Display Avoid placing the main unit in the following areasButtons and Controls Selects the next available window counter-clockwise Initial Set up Clock and Alarms Window Clock and Calendar Displays Selecting Clock and Alarm WindowInitial Settings City, Time, Date and Language Operation and Window SelectionCustom Weather Station Settings Display Select Pressure and Weather Forecast Window Pressure and Weather Forecast WindowPressure and Altitude Information Changing or Setting Altitude Changing or Setting Sea Level PressureChanging Pressure and Altitude Parameters Viewing the Pressure, Temperature and Humidity Bar Charts Viewing the Moon Phase HistoryMoon Phase Diagram Viewing the Sea Level Pressure HistoryWeather Forecast Displays Temperature and Humidity Window Display Selecting Temperature and Humidity Window Viewing Temperature and Humidity for each ChannelTemperature and Dew Point Displays Temperature in Celsius or FahrenheitProgramming Upper and Lower limits for Temperature Alarm Disabling Temperature Alarm levelsViewing the Max/Min Channel Temperature and Humidity Rain WindowRainfall Memory Reset Setting Rain Display inches or mmSetting up Daily Rainfall Alert Viewing Rain StatisticsConfiguring Wind Display Setting Wind Speed in km/h, mph, m/s or knotsResetting the Wind Statistics Memory Selecting Wind WindowEnable/Disable Time Alarms Programming Time AlarmsWind Alert programming Disabling the Wind AlertDisable alarms Disable/Enable Snooze functionAtomic Time Reception Memory Reset Procedure MaintenanceRemote Sensor Status Activate Search for Remote SensorsTroubleshooting Precautions Weather forecast is inaccurateAppendix City Codes Specifications Power 12 AA Batteries included Wind SpeedRainfall Hardware Requirement for WeatherCapture PC softwareWeight without batteries Battery life alkalineDimensions Declaration of Conformity