Lincoln Electric GX 271 Table B.3 Summary of Welding Processes and Machine Settings, Used Switch

B-9 OPERATION B-9

TABLE B.3

SUMMARY OF WELDING PROCESSES AND MACHINE SETTINGS

PROCESS	CONTROL	MODE	IDLER	OUTPUT	WELDING	ELECTRODE	TO START WELDING
	CABLE	SWITCH	SWITCH	CONTROL	TERMINALS	WHEN NOT
	USED			SWITCH	SWITCH	WELDING
							Touch electrode to work.
STICK - CC	NO	STICK/TIG	AUTO	LOCAL	WELDING	HOT	Welding starts immediately
		or PIPE			ON		and engine goes to high idle.
TIG - CC	YES		AUTO				Press Amptrol. GX-271
K930-1 TIG MODULE /		STICK/TIG		REMOTE	CONTACTOR	COLD	contactor closes. Welding
K936-1 CONTROL CABLE					CONTROLLED		starts immediately and engine
(With Amptrol)							goes to high idle.
WIRE FEED - CV,	YES						Press gun trigger, GX-271
LN-25 WITH 42V		WIRE FEED	AUTO	REMOTE	CONTACTOR	COLD	contactor closes. Welding
REMOTE CON-					CONTROLLED		starts immediately and engine
TROL KIT							goes to high idle.
WIRE FEED - CV,	NO						Press gun trigger, LN-25
LN-25 WITH		WIRE FEED	AUTO	LOCAL	WELDING	COLD	contactor closes. Welding
INTERNAL					ON		starts immediately and engine
CONTACTOR							goes to high idle.
WIRE FEED - CV,	YES						Press gun trigger, GX-271
LN-742		WIRE FEED	AUTO	REMOTE	CONTACTOR	COLD	contactor closes. Welding
					CONTROLLED		starts immediately and engine
							goes to high idle.
WIRE FEED - CV,	YES					COLD	Press gun trigger, GX-271
LN-7		WIRE FEED	HIGH	REMOTE	CONTACTOR		contactor closes. Welding
					CONTROLLED		starts immediately.

GX 271 Chopper