Milwaukee 6072, 6066-6, 6078, 6065-6 Maintenance, Accessories, Five Year Tool Limited Warranty

Page 11

MAINTENANCE

WARNING!

To reduce the risk of injury, always unplug your tool before performing any maintenance. Never disassemble the tool or try to do any rewiring on the tool's electrical system. Contact a MILWAUKEE service facility for ALL repairs.

Maintaining Tools

Keep your tool in good repair by adopting a regular maintenance pro- gram. Before use, examine the general condition of your tool. Inspect guards, switches, tool cord set and extension cord for damage. Check for loose screws, misalignment, binding of moving parts, improper mount- ing, broken parts and any other condition that may affect its safe opera- tion. If abnormal noise or vibration occurs, turn the tool off immediately and have the problem corrected before further use. Do not use a dam- aged tool. Tag damaged tools “DO NOT USE” until repaired (see “Repairs”).

Under normal conditions, relubrication is not necessary until the motor brushes need to be replaced. After six months to one year, depending on use, return your tool to the nearest MILWAUKEE service facility for the following:

Lubrication

Brush inspection and replacement

Mechanical inspection and cleaning (gears, spindles, bearings, housing, etc.)

Electrical inspection (switch, cord, armature, etc.)

Testing to assure proper mechanical and electrical operation

WARNING!

To reduce the risk of injury, electric shock and damage to the tool, never immerse your tool in liquid or allow a liquid to flow inside the tool.

Cleaning

Clean dust and debris from vents. Keep the tool handles clean, dry and free of oil or grease. Use only mild soap and a damp cloth to clean your tool since certain cleaning agents and solvents are harmful to plastics and other insulated parts. Some of these include: gasoline, turpentine, lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia and household detergents containing ammonia. Never use flammable or combustible solvents around tools.

Repairs

If your tool is damaged, return the entire tool to the nearest service center.

ACCESSORIES

WARNING!

To reduce the risk of injury, always unplug the tool before attaching or removing accessories. Use only specifically recommended accessories. Others may be hazardous.

For a complete listing of accessories refer to your MILWAUKEE Electric Tool catalog or go on-line to www.milwaukeetool.com. To obtain a catalog, contact your local distributor or a service center.

Replacement Flange

Cat. No. 49-05-0060

For replacement of lost or damaged flanges.

Replacement Nylon Washer

Cat. No. 45-88-8465

For replacement of lost or damaged washers.

Steel Carrying Case

Cat. No. 48-55-0890

Store and protect your investment as well as organize your accessories with this rugged steel case.

Side Handle

Cat. No. 43-62-0880

For replacement of lost or damaged side handles.

Abrasive Disc Cutter

Cat. No. 49-80-1000

Extend the life of larger used abrasive discs by trimming them down to smaller sizes, exposing fresh grit surfaces for use.

FIVE YEAR TOOL LIMITED WARRANTY

Every MILWAUKEE tool is tested before leaving the factory and is war- ranted to be free from defects in material and workmanship. MILWAUKEE will repair or replace (at MILWAUKEE’s discretion), without charge, any tool (including battery chargers) which examination proves to be defec- tive in material or workmanship from five (5) years after the date of purchase. Return the tool and a copy of the purchase receipt or other proof of purchase to a MILWAUKEE Factory Service/Sales Support Branch location or MILWAUKEE Authorized Service Station, freight pre- paid and insured. This warranty does not cover damage from repairs made or attempted by other than MILWAUKEE authorized personnel, abuse, normal wear and tear, lack of maintenance, or accidents.

Battery Packs, Flashlights, and Radios are warranted for one (1) year from the date of purchase.

THE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN ARE EXCLUSIVE. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES, INCLUDING LOSS OF PROFITS.

THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRAN- TIES, OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED FOR MERCHANTABLILITY OR FITNESS FOR PARTICULAR USE OR PURPOSE.

This warranty gives you specific legal rights. You may also have other rights that vary from state to state and province to province. In those states that do not allow the exclusion of implied warranties or limitation of incidental or consequential damages, the above limitations or exclu- sions may not apply to you. This warranty applies to the United States, Canada, and Mexico only.

page 11

Image 11
Contents Operators Manual Service Work Area Safety Power Tool USE and CareElectrical Safety Personal SafetySpecific Safety Rules Functionaldescription Extensioncords Guidelines for Using Extension CordsRecommended Minimum Wire Gauge For Extension Cords GroundingRemoving and Replacing Quik-LokCords Select Models Fig Tool AssemblyUsing the Dial Speed Control Cat. No only OperationUsing Sanding Discs Inspecting Wheels Using Grinding and CUT-OFF WheelsInstalling Grinding Wheels Fig Hold at a 5 to 15 angle Selecting Wire Brushes Using Wire BrushesFive Year Tool Limited Warranty MaintenanceAccessories UTILISATIONETENTRETIENDEL’OUTILÉLECTRIQUE Conserver Cesinstructions Sécurité DU Lieu DE TravailSécurité Électrique Sécurité IndividuelleRègles DE Sécurité Particulière 6068 Descriptionfonctionnelle6067 Directives pour l’emploi des cordons de rallonge Calibres minimaux recommandés pour Les cordons de rallongeMise À LA Terre Avertissement Cordons DE RallongeManiement Avertissement Montage DE Loutil AvertissementUtilisation DES Disques Abrasivs Utilisation DES Meules Abrasives ET DES Meules À Tronçonner Tenez loutil à angle de 5 à Inspection des meulesChoix des meules Meulage etUtilisation des brosses à fils d’acier Installation des brosses en toile métallique FigUtilisation DES Brosses À Fils Dacier Sélection des brosses à fils d’acierGarantie Limitée DE L’OUTIL DE Cinq ANS Maintenance AvertissementAccessoires Avertissement USO Y Cuidado DE LAS Herramientas Eléctricas GUA0RDE Estas Instrucciones Seguridad EN EL Área DE TrabajoSeguridad Eléctrica Seguridad PersonalDe Flecha Del Disco 6065 Reglas Especificas DE SeguridadDescripcionfuncional Cat Rpm Tamaño Mínimas RPMGuías para el uso de cables de extensión Tierra ¡ADVERTENCIAExtensiónes Eléctricas Instalación del mango lateral Ensambaje DE LA Herramienta ¡ADVERTENCIAMaterial de discos abrasivos y ruedas abrasivas Operacion ¡ADVERTENCIASelección del disco abrasivo y la rueda abrasiva USO DE Discos Abrasivos USO DE Ruedas Abrasivas Y Ruedas DE Corte Esmerilado y Solución de problemasRevisión de las ruedas Selección de ruedasUso de los cepillos de alambre Usando DE Cepillos DE AlambreSelección de cepillos de alambre Instalación de los cepillos de alambre tipo rueda FigGarantía Limitada DE Cinco Años Mantenimiento ¡ADVERTENCIAAccesorios ¡ADVERTENCIA Sawdust