Wagner SprayTech 505 owner manual Spraying Technique, Result of Flexing Wrist While Spraying

Page 16

SPRAYING

SPRAYING TECHNIQUE

1.The key to a good paint job is an even coating over the entire surface. With spray painting, this is done by using even strokes, with your arm moving at a con- stant speed and keeping the spray gun a constant distance from the surface.

2.In most cases, the best spraying distance is 10 to 12 inches between the spray tip and the surface.

3.As much as possible, keep the spray gun at right angles to the surface. This means moving your entire arm back and forth rather than just flexing your wrist. See Figures 25 and 26.

4.Keep the spray gun perpendicular to the surface, otherwise one end of the pattern will be thicker than the other. See Figure 27.

Figure 25 - Result of Flexing Wrist While Spraying

Even Coat on Work Throughout

Approximatelyproximatley 1010toto1212Inches

Right	Steady Arm
Way To Spray

Figure 26 - Result of smooth arm stroke and steady,

even speed while spraying.

Approximately 10 to 12 Inches

Right Way

Wrong Way

Figure 27 - Right and wrong ways to hold spray gun

toward work.

16

Image 16

Contents 505 Questions? ... Need Help?Specifications General DescriptionSafety Precautions Hazard Prevention Hazard Prevention Do not USE Bleach Extension Cord Grounding InstructionsPressure Relief Procedure Assemble Cart SET-UPTools needed Attach TIP to GUN Correct Way Wrong WayAttach Return Hose Attach Paint Hose Attaching High Pressure Hose to GunPrepare to Prime PrimingReturn unit to upright position Attach Suction SET Prime the Pump Do Not Cross threadTurn Sprayer on Spraying Practice FirstSpraying Technique Result of Flexing Wrist While SprayingIf Spray Tip Becomes Clogged Proper Way to Trigger Spray GunTo clean the filter during the painting process Suction Set ScreenClean UP SHORT-TERM/OVERNIGHT StorageShut-down Start-upCleanup Shut DOWN/CLEAN UPCleaning Bucket Fill Inlet Valve With Oil Maintenance Cleaning ValvesRemoving and Cleaning Inlet Valve Cleaning and Servicing Outlet ValvePriming Knob Slippage Erature setCleaning Hopper Unit Optional Hopper AssemblyConverting Sprayer for Hopper Operation Trouble Shooting Problem Cause RemedyProblem Cause Remedy Parts Diagram Final Assembly Parts Diagram Paint Pump Assembly Item Part no Description QTYParts Diagram Suction Set Assembly 0270174 Parts Diagram Optional Hopper Assembly AccessoriesPart Description Number PartDescription NumberParts and Accessories Parts ListLimited Warranty Airless Paint Spray Equipment Wagner Spray Tech Corporation