Pressure Relief Procedure
Follow this procedure after the unit is assembled and before any operation which involves the spray gun such as changing tips or accessories, or cleaning and maintenance.
1.Make sure PRESSURE CONTROL KNOB is at its lowest setting (counterclockwise).
Pressure Control
Knob
3.Trigger gun to remove any pressure which may still be in the hose.
2. Turn PRIMING KNOB to PRIME A position. | 4. Lock gun trigger in the Off position. | |
Prime A | Trigger Lock | |
Spray B | ||
| ||
Knob |
|
Injection hazard possible. Do
WARNINGnot spray without tip guard in
place. NEVER trigger gun unless tip is completely turned to the spray or unclog position. ALWAYS engage trigger lock before removing, replacing or cleaning tip.
8