Wagner SprayTech 505 owner manual Safety Precautions

Page 3

SAFETY PRECAUTIONS

This manual contains information which must be read and understood before using the equipment. When you come to an area which has one of the following symbols, pay particular attention and make certain to heed the safeguard.

WARNING

Important safety information indicates a hazard which may cause serious injury or loss of life.

CAUTION

Important information that tells how to prevent damage to equipment or how to avoid causes of minor injuries.

Notes: Gives important information which should be given special attention.

CAUTION

THIS UNIT IS PROVIDED WITH A THERMALLY PROTECTED AUTOMATIC RESET. IF AN OVERLOAD OCCURS THE THERMALLY PROTECTED AUTOMATIC RESET DISCONNECTS THE MOTOR FROM THE POWER SUPPLY.

•Motor will restart without warning when protector automatically resets.

•Always disconnect motor from power supply before working on equipment.

•When thermally protected automatic reset disconnects the motor from the power supply, relieve pressure by turning priming valve to "prime" A .

•Turn ON-OFF switch OFF.

CAUTION: THE CAUSE OF THE OVERLOAD SHOULD BE CORRECTED BEFORE RESTARTING. (SEE TROUBLE SHOOTING )

3

Image 3

Contents Questions? ... Need Help? 505General Description SpecificationsSafety Precautions Hazard Prevention Hazard Prevention Do not USE Bleach Grounding Instructions Extension CordPressure Relief Procedure SET-UP Assemble CartTools needed Correct Way Wrong Way Attach TIP to GUNAttaching High Pressure Hose to Gun Attach Return Hose Attach Paint HosePriming Prepare to PrimeReturn unit to upright position Do Not Cross thread Attach Suction SET Prime the PumpTurn Sprayer on Practice First SprayingResult of Flexing Wrist While Spraying Spraying TechniqueProper Way to Trigger Spray Gun If Spray Tip Becomes CloggedSuction Set Screen To clean the filter during the painting processStart-up Clean UPSHORT-TERM/OVERNIGHT Storage Shut-downShut DOWN/CLEAN UP CleanupCleaning Bucket Fill Inlet Valve With Oil Cleaning and Servicing Outlet Valve MaintenanceCleaning Valves Removing and Cleaning Inlet ValveErature set Priming Knob SlippageOptional Hopper Assembly Cleaning Hopper UnitConverting Sprayer for Hopper Operation Problem Cause Remedy Trouble ShootingProblem Cause Remedy Parts Diagram Final Assembly Item Part no Description QTY Parts Diagram Paint Pump AssemblyParts Diagram Suction Set Assembly 0270174 PartDescription Number Parts Diagram Optional Hopper AssemblyAccessories Part Description NumberParts List Parts and AccessoriesWagner Spray Tech Corporation Limited Warranty Airless Paint Spray Equipment