Wagner SprayTech 505 owner manual Do not USE Bleach

Page 6

WARNING

HAZARD

PREVENTION

 

 

Explosion hazard incompatible materials - May cause property damage or severe injury.

DO NOT USE BLEACH.

DO NOT use halogenated hydrocarbon solvents.

Halogenated hydrocarbon solvents such as methylene chloride and 1,1,1 - Trichlorethane are not compatible with aluminum and may cause an explosion. If unsure of a material’s compatibility with aluminum, contact your coatings supplier.

Hazardous vapors - Paints, solvents, insecticides, and other materials may be harmful if inhaled causing se- vere nausea, fainting, or poisoning.

Use a respirator or mask whenever there is a chance that vapors may be inhaled. Read all instructions with the mask to insure that it will provide the necessary protection against the inhalation of harmful vapors.

General - May cause property damage or severe injury.

Read all instructions and safety precautions before oper- ating.

Comply with all appropriate local, state and national codes governing ventilation, fire prevention, and opera- tion.

The United States Government Safety Standards have been adopted under Occupational Safety and Health Act. These standards, particularly the General Standards, Part 1910 and construction Standard, Part 1926, should be consulted.

This high pressure airless pump is designed to be used with authorized parts only. When using this pump with parts that do not comply with the minimum specifications and safety devices of the pump manufacturer, the user assumes all risks and liabilities.

Before each use, check all hoses for cuts, leaks, abrasion or bulging of cover or damage or movement of couplings. If any of these conditions exist, replace the hose immedi- ately. Never repair a paint hose. Replace it with another grounded hose.

All hoses, swivels, guns, and accessories used with this unit must be pressure rated at or above 2500 PSI.

DO NOT spray on windy days.

6

Image 6
Contents 505 Questions? ... Need Help?Specifications General DescriptionSafety Precautions Hazard Prevention Hazard Prevention Do not USE Bleach Extension Cord Grounding InstructionsPressure Relief Procedure SET-UP Assemble CartTools needed Attach TIP to GUN Correct Way Wrong WayAttach Return Hose Attach Paint Hose Attaching High Pressure Hose to GunPriming Prepare to PrimeReturn unit to upright position Attach Suction SET Prime the Pump Do Not Cross threadTurn Sprayer on Spraying Practice FirstSpraying Technique Result of Flexing Wrist While SprayingIf Spray Tip Becomes Clogged Proper Way to Trigger Spray GunTo clean the filter during the painting process Suction Set ScreenShut-down Clean UPSHORT-TERM/OVERNIGHT Storage Start-upCleanup Shut DOWN/CLEAN UPCleaning Bucket Fill Inlet Valve With Oil Removing and Cleaning Inlet Valve MaintenanceCleaning Valves Cleaning and Servicing Outlet ValvePriming Knob Slippage Erature setOptional Hopper Assembly Cleaning Hopper UnitConverting Sprayer for Hopper Operation Trouble Shooting Problem Cause RemedyProblem Cause Remedy Parts Diagram Final Assembly Parts Diagram Paint Pump Assembly Item Part no Description QTYParts Diagram Suction Set Assembly 0270174 Part Description Number Parts Diagram Optional Hopper AssemblyAccessories PartDescription NumberParts and Accessories Parts ListLimited Warranty Airless Paint Spray Equipment Wagner Spray Tech Corporation