| PRIMING | ||
ATTACH SUCTION SET |
|
| PRIME THE PUMP |
|
|
|
|
|
|
|
|
1.Attach Suction Tube to inlet valve and tighten firmly by hand. See Figure 15. Be sure threads are straight so the fitting turns freely without binding.
(Do Not
cross thread)
Figure 15 - Attaching Suction Tube
2.Place suction tube and return tube in paint. See Figure 16.
Figure 16 - Place Suction Tube and Return Tube in
Paint.
3.Set paint bucket onto pail bracket and attach handle. See Figure 17.
1.Make sure the PRESSURE CONTROL KNOB is at its lowest setting (counterclockwise). See Figure 18.
Pressure Control
Knob
Figure 18 - Set Pressure Control Knob
2. Turn PRIMING KNOB to Prime A position. See Figure 19.
Prime A
Spray B
Knob
Figure 19 - Priming Knob Setting
Figure 17 - Attaching Paint Pail Handle
13
13