Wagner SprayTech 505 owner manual Clean UP, SHORT-TERM/OVERNIGHT Storage, Shut-down, Start-up

Page 19

CLEAN UP

SHORT-TERM/OVERNIGHT STORAGE

Shut-down

1.Lock the gun and reduce the pressure. Turn the sprayer to prime A and shut it off. Unplug sprayer. Leave the suction set in the paint. Refer to Pressure Relief Procedure.

2.For latex materials only, pour 1/2 cup water slowly on the top of the paint to prevent the paint from drying. For other materials, seal the paint container with a piece of plastic while the suction tube is still in the paint. See Figure 33.

– OR –

Figure 33 – Add 1/2 Cup Water to Latex Paint

Seal Container for Other Materials.

3.Wrap the spray gun (completely assembled) in a damp cloth and place it in a plastic bag. Seal the bag shut. See Figure 34.

Figure 34 - Place Gun in Sealed Bag

4.Place the sprayer in a safe place out of the sun for short-term storage.

Start-up

1.Remove the gun from the plastic bag.

2.Stir the water into the paint for latex materials. Re- move the seal from the paint bucket and stir the paint for all other materials.

Figure 35 - Stir Material Before Spraying

3.Check to be sure the sprayer is in the Prime A position with the pressure completely reduced.

4.Plug sprayer in and turn on.

5.Turn the sprayer to Spray B and gradually increase the pressure.

6.Test the sprayer on a practice piece and begin spraying.

Figure 36 - Test on scrap material.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Questions? ... Need Help? 505General Description SpecificationsSafety Precautions Hazard Prevention Hazard Prevention Do not USE Bleach Grounding Instructions Extension CordPressure Relief Procedure Assemble Cart SET-UPTools needed Correct Way Wrong Way Attach TIP to GUNAttaching High Pressure Hose to Gun Attach Return Hose Attach Paint HosePrepare to Prime PrimingReturn unit to upright position Do Not Cross thread Attach Suction SET Prime the PumpTurn Sprayer on Practice First SprayingResult of Flexing Wrist While Spraying Spraying TechniqueProper Way to Trigger Spray Gun If Spray Tip Becomes CloggedSuction Set Screen To clean the filter during the painting processStart-up Clean UPSHORT-TERM/OVERNIGHT Storage Shut-downShut DOWN/CLEAN UP CleanupCleaning Bucket Fill Inlet Valve With Oil Cleaning and Servicing Outlet Valve MaintenanceCleaning Valves Removing and Cleaning Inlet ValveErature set Priming Knob SlippageCleaning Hopper Unit Optional Hopper AssemblyConverting Sprayer for Hopper Operation Problem Cause Remedy Trouble ShootingProblem Cause Remedy Parts Diagram Final Assembly Item Part no Description QTY Parts Diagram Paint Pump AssemblyParts Diagram Suction Set Assembly 0270174 PartDescription Number Parts Diagram Optional Hopper AssemblyAccessories Part Description NumberParts List Parts and AccessoriesWagner Spray Tech Corporation Limited Warranty Airless Paint Spray Equipment
Top Page Image Contents