Sanyo VSP-3000 instruction manual Part names, Rear

Page 10

Part names (continued)

Rear

① ② ③ ④ ⑤

①Power terminal (DC 12 V)

Connect the accessory AC adapter to the DC terminal.

②USB mouse port (USB)

Connect the accessory USB cable to this port if using a DVR with a mouse function.

④Program terminal (PROGRAM)

This is for service use.

⑤Battery compartment (DC 9 V)

Use commercially-available alkaline battery.

③RS-485/RS-422 communication

terminals (TRx, Tx3, Tx2, Tx1)

When operating a camera or DVR, connect the cable from that device to the accessory connector, and then insert the connector into these terminals.

*1 *2

TRx Tx3 Tx2 Tx1

*1 For Sanyo SSP connections (TRx) +: RS485A

−: RS485B

If the DVR uses only an RJ11 terminal, use the accessory modular cable and the conversion connector. (P11)

*2 For PELCO-D/HSSP connections (Tx3 to Tx1)

+: RS485A

−: RS485B

9	Preparations

Image 10

Contents VSP-3000 Contents For the customers in Canada PrecautionsFor UL Users For EU UsersSafety Cautions Installation location Safety CautionsCleaning the interior Only use with 100 to 240V power source voltagePower plug Power cordWhen using an extension cord Use only the provided AC adapter When heavily soiled Power cord connection Connect power plug securely to outlet When not using for long periodsHow to disassemble Main featuresAccessories TrademarkPart names FrontPart names RearConnecting to a Sanyo camera Operation P20 Connection methodConnecting to a Sanyo DVR Operation P28 Connection methodVideo input Terminal Camera Main menu steps Menu settingsPress the SUB MENU/MAIN Menu button Language setting List of title input charactersTermination setting Menu settingsControl ID setting 1Move the joystick up or down to select 5. Control IDSleep setting Buzzer setting1Move the joystick up or down to select 9. Backlight Backlight settingMouse setting 1Move the joystick up or down to select 10. Mouse SET1Move the joystick up or down to select 12. Password DVR link settingPassword setting 1Move the joystick up or down to select 11. DVR LinkAvailable settings NO, YES Default settingFactory SET No YES CAM SETUP001 Camera settingsCamera setup steps PasswordProtocol setting Camera settingsAddress setting 1Move the joystick up or down to select 1. Address1Move the joystick up or down to select 3. Baudrate Baud rate settingPan and tilt speed setting 1Move the joystick up or down to select 5. PropChannel number 01−16 ÑCAM SETUP001† 6.DVR03 CH16 DVR address and channel settingDVR address 01−99 ÑCAM SETUP001† 6.DVR03 CH01 1Move the joystick up or down to select 6. DVRCamera operation buttons Camera operationsOperating the camera from the system controller OperationOpen CAM MENU? menu will be displayed Camera operations1Press the CAM Menu button Open CAM MENU?1Press the Preset Memory button Preset position retrieval operationPreset memory operations Auxiliary function operationSequence operation Pan operationTour operation Sanyo Switching the DVR screen displayDVR operation Multi1Press the mouse button Mouse ModeOperating a DVR with mouse function Button Left clickAppendices List of auxiliary commands for Sanyo camerasOthers Camera address numbers default value AppendicesExternal dimensions Speciﬁcations