Sanyo VSP-3000 Safety Cautions, Transport with care, Cleaning the interior, Installation location

Page 5

Safety Cautions

CAUTION

■ Transport with care

Unplug the AC adapter power plug from the

outlet, confirm that connection cables are

disconnected, and transport carefully to avoid

dropping the unit or subjecting it to severe shock.

■ Cautions for care or long-term disuse

Unplug the AC adapter power plug from the

outlet. Caring for the unit with the AC adapter

connected can cause electric shock.

■ Cleaning the interior

For cleaning the interior, consult the installer

or the location of purchase. When dust

has accumulated inside the unit over time

without cleaning, this can cause fires or unit

breakdowns.

■ Installation location

This unit is comprised of precision electronic

parts. Never install in the locations described

Provided AC Adapter

DANGER

■Only use with 100 to 240V power source voltage.

This can cause fires and electric shock.

■Never disassemble or modify

•Touching the internal parts is dangerous, and can cause fires and electric shock.

•Never use as a DC power source unit.

■Never get unit wet

•Never submerge in water or get unit wet. This can cause fires and electric shock.

•Do not use in a bath or shower room.

•In the event that water enters the unit interior, unplug the power plug from the outlet, and contact the installer or location of purchase. Continued use can cause fires, electric shock, and unit breakdowns.

below, as this can cause operation errors and

unit breakdowns.

• In direct sunlight

• In extreme humidity or where humidity

fluctuates wildly

• Where water could be splashed

• Near heating/cooling equipment or humidifiers.

• Where cold air from air conditioners contact the

Power plug

Power cord

unit directly

• Where dust is extreme

• Near a spark source

• Near magnetic objects

• Near explosive materials

• Where subject to vibration

AC adapter	DC plug

Introduction

4

Image 5

Contents VSP-3000 Contents For UL Users PrecautionsFor the customers in Canada For EU UsersSafety Cautions Cleaning the interior Safety CautionsInstallation location Only use with 100 to 240V power source voltageWhen using an extension cord Power cordPower plug Use only the provided AC adapterConnect power plug securely to outlet Power cord connectionWhen heavily soiled When not using for long periodsAccessories Main featuresHow to disassemble TrademarkFront Part namesRear Part namesConnection method Connecting to a Sanyo camera Operation P20Connection method Connecting to a Sanyo DVR Operation P28Video input Terminal Camera Press the SUB MENU/MAIN Menu button Menu settingsMain menu steps List of title input characters Language settingControl ID setting Menu settingsTermination setting 1Move the joystick up or down to select 5. Control IDBuzzer setting Sleep settingMouse setting Backlight setting1Move the joystick up or down to select 9. Backlight 1Move the joystick up or down to select 10. Mouse SETPassword setting DVR link setting1Move the joystick up or down to select 12. Password 1Move the joystick up or down to select 11. DVR LinkFactory SET No YES Default settingAvailable settings NO, YES Camera setup steps Camera settingsCAM SETUP001 PasswordAddress setting Camera settingsProtocol setting 1Move the joystick up or down to select 1. AddressPan and tilt speed setting Baud rate setting1Move the joystick up or down to select 3. Baudrate 1Move the joystick up or down to select 5. PropDVR address 01−99 ÑCAM SETUP001† 6.DVR03 CH01 DVR address and channel settingChannel number 01−16 ÑCAM SETUP001† 6.DVR03 CH16 1Move the joystick up or down to select 6. DVROperating the camera from the system controller Camera operationsCamera operation buttons Operation1Press the CAM Menu button Camera operationsOpen CAM MENU? menu will be displayed Open CAM MENU?Preset memory operations Preset position retrieval operation1Press the Preset Memory button Auxiliary function operationTour operation Pan operationSequence operation DVR operation Switching the DVR screen displaySanyo MultiOperating a DVR with mouse function Mouse Mode1Press the mouse button Button Left clickOthers List of auxiliary commands for Sanyo camerasAppendices Appendices Camera address numbers default valueSpeciﬁcations External dimensions