Sanyo VSP-3000 instruction manual Menu settings, Control ID setting, Termination setting

Page 16

Menu settings (continued)

3 Control ID setting

If using more than one system controller, change the addresses for each of them. The addresses can be assigned to a number within the range of 0 to 4.

(Default setting: 0)

1Move the joystick up or down to select “5. CONTROL ID”.

ó

[ñ MAIN MENU †] 5.CONTROL ID: 0

2Move the joystick to the left or right to assign the address (Example: 3).

ó

[ñ MAIN MENU †] 5.CONTROL ID: 3

Available settings: 0−4

3Move the joystick up or down to select “14. SAVE/EXIT”, and then move the joystick to the right.

[ó MAIN MENU ]

14.SAVE/EXIT ·

4Move the joystick to the left or right to select “YES”, and then press the ENT button.

[SAVE / EXIT ]

NO <YES>

The setting will be saved and the display will return to the initial screen.

15 Preparations

4 Termination setting

Set the termination for the system controller. (Default setting: ON)

1Move the joystick up or down to select “6. TERMINATE”.

2Move the joystick to the left or right to set the termination.

ó	í]
[ñ MAIN MENU

6.TERMINATE: ON

3Move the joystick up or down to select “14. SAVE/EXIT”, and then move the joystick to the right.

[ó MAIN MENU ]

14.SAVE/EXIT ·

4Move the joystick to the left or right to select “YES”, and then press the ENT button.

[SAVE / EXIT ]

NO <YES>

The setting will be saved and the display will return to the initial screen.

Image 16

Contents VSP-3000 Contents Precautions For UL UsersFor the customers in Canada For EU UsersSafety Cautions Safety Cautions Cleaning the interiorInstallation location Only use with 100 to 240V power source voltagePower cord When using an extension cordPower plug Use only the provided AC adapterPower cord connection Connect power plug securely to outletWhen heavily soiled When not using for long periodsMain features AccessoriesHow to disassemble TrademarkPart names FrontPart names RearConnecting to a Sanyo camera Operation P20 Connection methodConnecting to a Sanyo DVR Operation P28 Connection methodVideo input Terminal Camera Main menu steps Menu settingsPress the SUB MENU/MAIN Menu button Language setting List of title input charactersMenu settings Control ID settingTermination setting 1Move the joystick up or down to select 5. Control IDSleep setting Buzzer settingBacklight setting Mouse setting1Move the joystick up or down to select 9. Backlight 1Move the joystick up or down to select 10. Mouse SETDVR link setting Password setting1Move the joystick up or down to select 12. Password 1Move the joystick up or down to select 11. DVR LinkAvailable settings NO, YES Default settingFactory SET No YES Camera settings Camera setup stepsCAM SETUP001 PasswordCamera settings Address settingProtocol setting 1Move the joystick up or down to select 1. AddressBaud rate setting Pan and tilt speed setting1Move the joystick up or down to select 3. Baudrate 1Move the joystick up or down to select 5. PropDVR address and channel setting DVR address 01−99 ÑCAM SETUP001† 6.DVR03 CH01Channel number 01−16 ÑCAM SETUP001† 6.DVR03 CH16 1Move the joystick up or down to select 6. DVRCamera operations Operating the camera from the system controllerCamera operation buttons OperationCamera operations 1Press the CAM Menu buttonOpen CAM MENU? menu will be displayed Open CAM MENU?Preset position retrieval operation Preset memory operations1Press the Preset Memory button Auxiliary function operationSequence operation Pan operationTour operation Switching the DVR screen display DVR operationSanyo MultiMouse Mode Operating a DVR with mouse function1Press the mouse button Button Left clickAppendices List of auxiliary commands for Sanyo camerasOthers Camera address numbers default value AppendicesExternal dimensions Speciﬁcations