Sanyo VSP-3000 instruction manual Pan operation, Sequence operation, Tour operation

Page 28

Camera operations (continued)

■Retrieving pan, sequence and tour operations recorded in a PTZ camera

You can select preset pan, sequence and tour operations so that these operations can be carried out.

This operation is limited to the following camera models which already contain preset operations.

• VCC-9500/9600/9700/9800 series

If you enter a number outside the range of 1 to 4, “error” will be displayed, so re-enter the number.

PAN PATTERN: error

A Pan operation

1While pressing the SHIFT/FUNC. button, press the PAN button.

“PAN PATTERN” will be displayed.

PAN PATTERN:

	+	–
	+	1-4 ENT/ESC
		1-4 ENT/ESC

2Press a numeric button (Example: 2) and then press the ENT button.

The pan operation recorded for the selected number will then be carried out.

Returns to the initial screen.

PAN PATTERN:2

CAM:002

▼

SANYO SSP 19.2k

CAM:001 D1 CH01

B Sequence operation

1While pressing the SHIFT/FUNC. button, press the SEQ button.

“SEQ PATTERN” will be displayed.

	+	SEQ	PATTERN:
			–
		1-4	ENT/ESC
		1-4	ENT/ESC

2Press a numeric button (Example: 2) and then press the ENT button.

The sequence operation recorded for the selected number will then be carried out. Returns to the initial screen.

SEQ PATTERN:2

CAM:002

C Tour operation

1While pressing the SHIFT/FUNC. button, press the TOUR button.

“TOUR PATTERN” will be displayed.

TOUR PATTERN:

	+	–
	+	1-4 ENT/ESC
		1-4 ENT/ESC

2Press a numeric button (Example: 2) and then press the ENT button.

The tour operation recorded for the selected number will then be carried out.

Returns to the initial screen.

TOUR PATTERN:2

CAM:002

27 Operation

Image 28

Contents VSP-3000 Contents Precautions For UL UsersFor the customers in Canada For EU UsersSafety Cautions Safety Cautions Cleaning the interiorInstallation location Only use with 100 to 240V power source voltagePower cord When using an extension cordPower plug Use only the provided AC adapterPower cord connection Connect power plug securely to outletWhen heavily soiled When not using for long periodsMain features AccessoriesHow to disassemble TrademarkPart names FrontPart names RearConnecting to a Sanyo camera Operation P20 Connection methodConnecting to a Sanyo DVR Operation P28 Connection methodVideo input Terminal Camera Main menu steps Menu settingsPress the SUB MENU/MAIN Menu button Language setting List of title input charactersMenu settings Control ID settingTermination setting 1Move the joystick up or down to select 5. Control IDSleep setting Buzzer settingBacklight setting Mouse setting1Move the joystick up or down to select 9. Backlight 1Move the joystick up or down to select 10. Mouse SETDVR link setting Password setting1Move the joystick up or down to select 12. Password 1Move the joystick up or down to select 11. DVR LinkAvailable settings NO, YES Default settingFactory SET No YES Camera settings Camera setup stepsCAM SETUP001 PasswordCamera settings Address settingProtocol setting 1Move the joystick up or down to select 1. AddressBaud rate setting Pan and tilt speed setting1Move the joystick up or down to select 3. Baudrate 1Move the joystick up or down to select 5. PropDVR address and channel setting DVR address 01−99 ÑCAM SETUP001† 6.DVR03 CH01Channel number 01−16 ÑCAM SETUP001† 6.DVR03 CH16 1Move the joystick up or down to select 6. DVRCamera operations Operating the camera from the system controllerCamera operation buttons OperationCamera operations 1Press the CAM Menu buttonOpen CAM MENU? menu will be displayed Open CAM MENU?Preset position retrieval operation Preset memory operations1Press the Preset Memory button Auxiliary function operationSequence operation Pan operationTour operation Switching the DVR screen display DVR operationSanyo MultiMouse Mode Operating a DVR with mouse function1Press the mouse button Button Left clickAppendices List of auxiliary commands for Sanyo camerasOthers Camera address numbers default value AppendicesExternal dimensions Speciﬁcations