Sanyo VSP-3000 Do not connect to other equipment, Power cord connection, Caring for the Unit

Page 7

Safety Cautions

CAUTION

Do not connect to other equipment

The provided AC adapter and power cable are exclusively for use with this unit. Connecting to other equipment can cause fires or electric shock.

Power cord

Damaging the power cord in the following manner can cause fires or electric shock. When the power cord is damaged, consult the installer or the location of purchase.

Never place a heavy object on the power cord, or expose to heating equipment, heated surfaces (front surface of heaters), or direct sunlight.

Do not stress the power cord with the weight of the AC adapter unit.

Never bundle up the power cord during use.

Never bend, modify, or staple the power cord.

Power cord connection

Route the power cord and connecting cables with care. Tripping over power cords can cause injuries due to falls or falling equipment.

Connect power plug securely to outlet

Using with an incomplete connection can cause fires due to overheating.

Do not place in unstable location

Place the unit in a stable location.

Placing the unit in an unstable location can cause injuries or unit breakdowns, due to falling or toppling equipment.

Always Observe These Rules for Proper Use

Caring for the Unit

Unplug the power plug from the outlet. Gently wipe away any contamination, using a soft cloth.

When heavily soiled...

Immerse a cloth in neutral detergent thinned with water, wring it well, and wipe the unit. Finish with a dry cloth.

Cautions

Never use benzene or paint thinner to clean the unit. The unit could discolor, or paint could be removed.

When using chemically treated cloths, note the cautions on the package.

Do not expose the unit to volatile chemicals such as pesticides. Do not leave the unit in contact with rubber or plastic products for long periods.

The unit could discolor, or paint could be removed.

When not using for long periods

Unplug the power plug from the outlet. However, this could damage the functions. Connect the power and operate the unit occasionally.

Introduction

6

Image 7
Contents VSP-3000 Contents For EU Users PrecautionsFor UL Users For the customers in Canada Safety Cautions Only use with 100 to 240V power source voltage Safety CautionsCleaning the interior Installation locationUse only the provided AC adapter Power cordWhen using an extension cord Power plugWhen not using for long periods Power cord connectionConnect power plug securely to outlet When heavily soiledTrademark Main featuresAccessories How to disassembleFront Part namesRear Part namesConnection method Connecting to a Sanyo camera Operation P20Connection method Connecting to a Sanyo DVR Operation P28Video input Terminal Camera Main menu steps Menu settingsPress the SUB MENU/MAIN Menu button List of title input characters Language setting1Move the joystick up or down to select 5. Control ID Menu settingsControl ID setting Termination settingBuzzer setting Sleep setting1Move the joystick up or down to select 10. Mouse SET Backlight settingMouse setting 1Move the joystick up or down to select 9. Backlight1Move the joystick up or down to select 11. DVR Link DVR link settingPassword setting 1Move the joystick up or down to select 12. PasswordAvailable settings NO, YES Default settingFactory SET No YES Password Camera settingsCamera setup steps CAM SETUP0011Move the joystick up or down to select 1. Address Camera settingsAddress setting Protocol setting1Move the joystick up or down to select 5. Prop Baud rate settingPan and tilt speed setting 1Move the joystick up or down to select 3. Baudrate1Move the joystick up or down to select 6. DVR DVR address and channel settingDVR address 01−99 ÑCAM SETUP001† 6.DVR03 CH01 Channel number 01−16 ÑCAM SETUP001† 6.DVR03 CH16Operation Camera operationsOperating the camera from the system controller Camera operation buttonsOpen CAM MENU? Camera operations1Press the CAM Menu button Open CAM MENU? menu will be displayedAuxiliary function operation Preset position retrieval operationPreset memory operations 1Press the Preset Memory buttonSequence operation Pan operationTour operation Multi Switching the DVR screen displayDVR operation SanyoButton Left click Mouse ModeOperating a DVR with mouse function 1Press the mouse buttonAppendices List of auxiliary commands for Sanyo camerasOthers Appendices Camera address numbers default valueSpecifications External dimensions