Sanyo VSP-3000 instruction manual Camera settings, Address setting, Protocol setting

Page 22

Camera settings (continued)

1 Address setting

This selects the camera address.

All settings other than this one will be applied to the selected address.

(Default setting: 001)

1Move the joystick up or down to select “1. ADDRESS”.

[ñCAM SETUP001†] 1.ADDRESS: 001

2Move the joystick to the left or right to select the address, and then press the ENT button.

[ñCAM SETUP001†] 1.ADDRESS: 001

[ñCAM SETUP255†] 1.ADDRESS: 255

The address can also be selected using the numeric buttons.

2 Protocol setting

This selects the protocol to be used for communication.

(Default setting: SSP)

1Move the joystick up or down to select “2. PROTOCOL”.

ó

[ñCAM SETUP001†] 2.PROTOCOL:SSP

2Move the joystick to the left or right to select the protocol.

The camera address will vary depending on the protocol selected.

Available settings: SSP (001−127) PEL-D (001−255) HSSP (001−127)

3Move the joystick up or down to select “7. SAVE”, and then move the joystick to the right.

“OK” will be displayed and the settings will be saved.

ó

[ñCAM SETUP001 ] UP001 ]

7.SAVE · OK

4Move the joystick up or down to select “8. EXIT”, and then move the joystick to the right.

Returns to the initial screen.

[óCAM SETUP001 ]

8.EXIT·

▼

SANYO SSP 19.2k

CAM:001 D1 CH01

21 Preparations

Image 22

Contents VSP-3000 Contents For the customers in Canada PrecautionsFor UL Users For EU UsersSafety Cautions Installation location Safety CautionsCleaning the interior Only use with 100 to 240V power source voltagePower plug Power cordWhen using an extension cord Use only the provided AC adapterWhen heavily soiled Power cord connectionConnect power plug securely to outlet When not using for long periodsHow to disassemble Main featuresAccessories TrademarkPart names FrontPart names RearConnecting to a Sanyo camera Operation P20 Connection methodConnecting to a Sanyo DVR Operation P28 Connection methodVideo input Terminal Camera Main menu steps Menu settingsPress the SUB MENU/MAIN Menu button Language setting List of title input charactersTermination setting Menu settingsControl ID setting 1Move the joystick up or down to select 5. Control IDSleep setting Buzzer setting1Move the joystick up or down to select 9. Backlight Backlight settingMouse setting 1Move the joystick up or down to select 10. Mouse SET1Move the joystick up or down to select 12. Password DVR link settingPassword setting 1Move the joystick up or down to select 11. DVR LinkAvailable settings NO, YES Default settingFactory SET No YES CAM SETUP001 Camera settingsCamera setup steps PasswordProtocol setting Camera settingsAddress setting 1Move the joystick up or down to select 1. Address1Move the joystick up or down to select 3. Baudrate Baud rate settingPan and tilt speed setting 1Move the joystick up or down to select 5. PropChannel number 01−16 ÑCAM SETUP001† 6.DVR03 CH16 DVR address and channel settingDVR address 01−99 ÑCAM SETUP001† 6.DVR03 CH01 1Move the joystick up or down to select 6. DVRCamera operation buttons Camera operationsOperating the camera from the system controller OperationOpen CAM MENU? menu will be displayed Camera operations1Press the CAM Menu button Open CAM MENU?1Press the Preset Memory button Preset position retrieval operationPreset memory operations Auxiliary function operationSequence operation Pan operationTour operation Sanyo Switching the DVR screen displayDVR operation Multi1Press the mouse button Mouse ModeOperating a DVR with mouse function Button Left clickAppendices List of auxiliary commands for Sanyo camerasOthers Camera address numbers default value AppendicesExternal dimensions Speciﬁcations