Sanyo VSP-3000 Auxiliary function operation, Preset position retrieval operation

Page 27

Camera operations

■Auxiliary function operation

Transmits AUX ON/OFF commands to the selected cameras.

For details, refer to “List of auxiliary commands for Sanyo cameras”. (P30)

1Press the AUX button. “AUX ON” will be displayed.

If the AUX button is pressed once more, the display changes to “AUX OFF”.

AUX ON :–

1-16 ENT/ESC

2Press a numeric button (Example: 2) and then press the ENT button.

AUX ON :2–

CAM:001

▼

AUX ON :2

1-16 ENT/ESC

Available settings:

Sanyo SSP/HSSP: 1−16

Pelco-D: 1−8

■Preset position retrieval operation

This retrieves preset positions which have been recorded by the camera beforehand. Up to 255 settings can be retrieved. (Varies depending on model.)

1Press the PRESET GO button. “GO PRESET P” will be displayed.

GO PRESET P:– 1-255 ENT/ESC

2Press a numeric button (Example: 1) and then press the ENT button.

The camera will move to preset position 1.

GO PRESET P:1

CAM:001

■Preset memory operations

Records preset positions into the cameras. First use the joystick or some other method to select a preset position for the camera.

1Press the PRESET MEMORY button.

You will be prompted for the password.

MEM.PRESET:?

PASSWORD[ ---- ]

2No password is set initially, so simply press the ENT button.

MEM.PRESET:– 1-255 ENT/ESC

3Press a numeric button (Example: 1) to select the desired preset number, and then press the ENT button.

Preset position 1 has now been recorded.

MEM.PRESET:1

CAM:001

•If you make a mistake with a number while entering any of the settings, press the CLR button.

•To return to another operation, press the ESC/PWR button to return to the initial screen.

Operation 26

Image 27

Contents VSP-3000 Contents For EU Users PrecautionsFor UL Users For the customers in CanadaSafety Cautions Only use with 100 to 240V power source voltage Safety CautionsCleaning the interior Installation locationUse only the provided AC adapter Power cordWhen using an extension cord Power plugWhen not using for long periods Power cord connectionConnect power plug securely to outlet When heavily soiledTrademark Main featuresAccessories How to disassembleFront Part namesRear Part namesConnection method Connecting to a Sanyo camera Operation P20Connection method Connecting to a Sanyo DVR Operation P28Video input Terminal Camera Menu settings Main menu stepsPress the SUB MENU/MAIN Menu button List of title input characters Language setting1Move the joystick up or down to select 5. Control ID Menu settingsControl ID setting Termination settingBuzzer setting Sleep setting1Move the joystick up or down to select 10. Mouse SET Backlight settingMouse setting 1Move the joystick up or down to select 9. Backlight1Move the joystick up or down to select 11. DVR Link DVR link settingPassword setting 1Move the joystick up or down to select 12. PasswordDefault setting Available settings NO, YESFactory SET No YES Password Camera settingsCamera setup steps CAM SETUP0011Move the joystick up or down to select 1. Address Camera settingsAddress setting Protocol setting1Move the joystick up or down to select 5. Prop Baud rate settingPan and tilt speed setting 1Move the joystick up or down to select 3. Baudrate1Move the joystick up or down to select 6. DVR DVR address and channel settingDVR address 01−99 ÑCAM SETUP001† 6.DVR03 CH01 Channel number 01−16 ÑCAM SETUP001† 6.DVR03 CH16Operation Camera operationsOperating the camera from the system controller Camera operation buttonsOpen CAM MENU? Camera operations1Press the CAM Menu button Open CAM MENU? menu will be displayedAuxiliary function operation Preset position retrieval operationPreset memory operations 1Press the Preset Memory buttonPan operation Sequence operationTour operation Multi Switching the DVR screen displayDVR operation SanyoButton Left click Mouse ModeOperating a DVR with mouse function 1Press the mouse buttonList of auxiliary commands for Sanyo cameras AppendicesOthers Appendices Camera address numbers default valueSpeciﬁcations External dimensions