Sanyo VSP-3000 instruction manual Part names, Front

Page 9

Part names

Front

① ②

③

⑩

PWR Tx Rx





④ ⑤ ⑥⑦ ⑧						⑨

DVR: Digital video recorder

①Escape/Power button (ESC/PWR)

ESC:

This is used to exit from the current operating menu and return to the initial screen.

PWR:

• When you press the button, the power turns on and the PWR indicator on the power/ communication indicator panel illuminates. The version information will be displayed in the menu display, and then the initial screen will be displayed.

(Version information)

SANYO VSP-3000

Ver:X.XX

③Menu display

This displays the information which is required for menu settings.

④Clear button (CLR)

This button is used to correct any character input errors such as passwords.

⑤Numeric buttons (0 to 9)

These are used to select camera numbers and for character input.

⑥Enter button (ENT)

This is used to confirm menu settings.

⑦DVR operation button (P28)

▼

(Initial screen)

SANYO SSP 19.2k

CAM:001 D1 CH01

•If you press and hold the button for approximately 3 seconds, “POWER OFF” will be displayed. When you release the button, the power will turn off.

SANYO SSP 19.2k

<POWER OFF >

②Mouse button ()

If the accessory USB cable is used to connect a DVR with a mouse function (sold separately) to the USB mouse port at the rear of the system controller, the joystick can be used to operate the cursor. (P29)

⑧Camera operation buttons

These are used to operate the cameras. (P20)

⑨Joystick

This controls the pan (left and right), tilt (forward and back) and zoom in and out (rotation) operations of the camera. In addition, it is used to select menu items which are appearing in the menu display.

⑩Power/communication indicator panel

• PWR (Power): Illuminates when the power is

turned on.

•Tx: Flashes while a command is being sent.

•Rx: Flashes while a command is being received.

Preparations

8

Image 9

Contents VSP-3000 Contents For UL Users PrecautionsFor the customers in Canada For EU UsersSafety Cautions Cleaning the interior Safety CautionsInstallation location Only use with 100 to 240V power source voltageWhen using an extension cord Power cordPower plug Use only the provided AC adapterConnect power plug securely to outlet Power cord connectionWhen heavily soiled When not using for long periodsAccessories Main featuresHow to disassemble TrademarkFront Part namesRear Part namesConnection method Connecting to a Sanyo camera Operation P20Connection method Connecting to a Sanyo DVR Operation P28Video input Terminal Camera Menu settings Main menu stepsPress the SUB MENU/MAIN Menu button List of title input characters Language settingControl ID setting Menu settingsTermination setting 1Move the joystick up or down to select 5. Control IDBuzzer setting Sleep settingMouse setting Backlight setting1Move the joystick up or down to select 9. Backlight 1Move the joystick up or down to select 10. Mouse SETPassword setting DVR link setting1Move the joystick up or down to select 12. Password 1Move the joystick up or down to select 11. DVR LinkDefault setting Available settings NO, YESFactory SET No YES Camera setup steps Camera settingsCAM SETUP001 PasswordAddress setting Camera settingsProtocol setting 1Move the joystick up or down to select 1. AddressPan and tilt speed setting Baud rate setting1Move the joystick up or down to select 3. Baudrate 1Move the joystick up or down to select 5. PropDVR address 01−99 ÑCAM SETUP001† 6.DVR03 CH01 DVR address and channel settingChannel number 01−16 ÑCAM SETUP001† 6.DVR03 CH16 1Move the joystick up or down to select 6. DVROperating the camera from the system controller Camera operationsCamera operation buttons Operation1Press the CAM Menu button Camera operationsOpen CAM MENU? menu will be displayed Open CAM MENU?Preset memory operations Preset position retrieval operation1Press the Preset Memory button Auxiliary function operationPan operation Sequence operationTour operation DVR operation Switching the DVR screen displaySanyo MultiOperating a DVR with mouse function Mouse Mode1Press the mouse button Button Left clickList of auxiliary commands for Sanyo cameras AppendicesOthers Appendices Camera address numbers default valueSpeciﬁcations External dimensions