Sanyo VSP-3000 instruction manual Camera operations, 1Press the CAM Menu button, Open CAM MENU?

Page 26

Camera operations (continued)

FOCUS NEAR:

Adjusts the focus to the nearest object.

FOCUS FAR:

Adjusts the focus to the furthest object.

GO PRESET P:

The camera will move to the preset position which has been recorded. For details, refer to “Preset position retrieval operation”. See page 26.

MEM.PRESET: ?:

Lets you record an object into a preset setting.

For details, refer to “Preset memory operations”. See page 26.

IRIS OPEN:

Increases the iris level setting.

IRIS CLOSE:

Decreases the iris level setting.

25 Operation

■Operating the camera by changing camera menu settings using the system controller

1Press the CAM MENU button.

The “OPEN CAM MENU?” menu will be displayed.

OPEN CAM MENU?

PASSWORD[ ---- ]

2No password is set initially, so simply press the ENT button.

The camera’s menu screen will be displayed on the monitor.

OPEN CAM MENU?

OK

▼

OPEN CAM MENU?

CAM:002

▼

SANYO SSP 19.2k

CAM:002 D1 CH02

While pressing the SHIFT/FUNC. button, press the CAM MENU button to exit the camera menu.

+

*Only available for the VCC-9500/9600/ 9700/9800 series.

3Use the joystick to select a menu, and then press the ENT button to display the sub-menu.

For details on menu operations, refer to the operating instructions for the camera.

Image 26

Contents VSP-3000 Contents For the customers in Canada PrecautionsFor UL Users For EU UsersSafety Cautions Installation location Safety CautionsCleaning the interior Only use with 100 to 240V power source voltagePower plug Power cordWhen using an extension cord Use only the provided AC adapterWhen heavily soiled Power cord connectionConnect power plug securely to outlet When not using for long periodsHow to disassemble Main featuresAccessories TrademarkPart names FrontPart names RearConnecting to a Sanyo camera Operation P20 Connection methodConnecting to a Sanyo DVR Operation P28 Connection methodVideo input Terminal Camera Press the SUB MENU/MAIN Menu button Menu settingsMain menu steps Language setting List of title input charactersTermination setting Menu settingsControl ID setting 1Move the joystick up or down to select 5. Control IDSleep setting Buzzer setting1Move the joystick up or down to select 9. Backlight Backlight settingMouse setting 1Move the joystick up or down to select 10. Mouse SET1Move the joystick up or down to select 12. Password DVR link settingPassword setting 1Move the joystick up or down to select 11. DVR LinkFactory SET No YES Default settingAvailable settings NO, YES CAM SETUP001 Camera settingsCamera setup steps PasswordProtocol setting Camera settingsAddress setting 1Move the joystick up or down to select 1. Address1Move the joystick up or down to select 3. Baudrate Baud rate settingPan and tilt speed setting 1Move the joystick up or down to select 5. PropChannel number 01−16 ÑCAM SETUP001† 6.DVR03 CH16 DVR address and channel settingDVR address 01−99 ÑCAM SETUP001† 6.DVR03 CH01 1Move the joystick up or down to select 6. DVRCamera operation buttons Camera operationsOperating the camera from the system controller OperationOpen CAM MENU? menu will be displayed Camera operations1Press the CAM Menu button Open CAM MENU?1Press the Preset Memory button Preset position retrieval operationPreset memory operations Auxiliary function operationTour operation Pan operationSequence operation Sanyo Switching the DVR screen displayDVR operation Multi1Press the mouse button Mouse ModeOperating a DVR with mouse function Button Left clickOthers List of auxiliary commands for Sanyo camerasAppendices Camera address numbers default value AppendicesExternal dimensions Speciﬁcations