Sanyo VSP-3000 instruction manual Safety Cautions

Page 4

Safety Cautions

Main Unit

WARNING

Never use when unit emits smoke, unusual noises, or unusual smells.

Using under these abnormal conditions can cause fires and electric shock.

Immediately unplug the AC adapter power plug from the outlet, confirm that the smoke stops, and then request repairs from the installer or the purchasing source.

Never attempt to repair the unit on your own, as this is dangerous.

Never disassemble or modify

Touching the internal parts is dangerous, and can cause fires and electric shock.

Request internal inspection, adjustment, and repairs from the installer or the location of purchase.

Never get unit wet

This unit is not waterproof or dustproof. Do not install where exposed to rain, excessive humidity, or excessive dust. This can cause fires and electric shock.

Do not install in a bath or shower room.

In the event that water enters the unit interior, unplug the AC adapter power plug from the outlet, and contact the installer or location of purchase. Continued use can cause fires, electric shock, and unit breakdowns.

Do not install in unstable location

The unit may fall or topple, causing injuries or unit breakdowns.

In the event that the unit is dropped or the cabinet is broken, unplug the AC adapter power plug from the outlet, and contact the installer or location of purchase. Continued use can cause fires or electric shock.

Do not use in locations with explosion risk

Do not use in locations where flammable gas or explosive gas may exist in the atmosphere. This can cause ignition and explosion.

Fogging (Condensation)

Drops of water form on the outside of a glass containing very cold water. Similarly, droplets can form on the interior of this unit. This is called fogging, or condensation.

Using the unit during fogging can cause a unit breakdown.

Be careful of fogging when the environment temperature changes suddenly, such as when heating the room quickly.

Fogging does not occur while electrical current is present.

Do not use during thunderstorms

Do not use this during thunderstorms.

In particular, never touch the AC adapter or connection cables. This can cause electric shock.

When fogging could occur...

Turn OFF the unit power, and leave the unit in its installed position for one to two hours before use.

3

Introduction

Image 4
Contents VSP-3000 Contents Precautions For UL UsersFor the customers in Canada For EU UsersSafety Cautions Safety Cautions Cleaning the interiorInstallation location Only use with 100 to 240V power source voltagePower cord When using an extension cordPower plug Use only the provided AC adapterPower cord connection Connect power plug securely to outletWhen heavily soiled When not using for long periodsMain features AccessoriesHow to disassemble TrademarkPart names FrontPart names RearConnecting to a Sanyo camera Operation P20 Connection methodConnecting to a Sanyo DVR Operation P28 Connection methodVideo input Terminal Camera Main menu steps Menu settingsPress the SUB MENU/MAIN Menu button Language setting List of title input charactersMenu settings Control ID settingTermination setting 1Move the joystick up or down to select 5. Control IDSleep setting Buzzer settingBacklight setting Mouse setting1Move the joystick up or down to select 9. Backlight 1Move the joystick up or down to select 10. Mouse SETDVR link setting Password setting1Move the joystick up or down to select 12. Password 1Move the joystick up or down to select 11. DVR LinkAvailable settings NO, YES Default settingFactory SET No YES Camera settings Camera setup stepsCAM SETUP001 PasswordCamera settings Address settingProtocol setting 1Move the joystick up or down to select 1. AddressBaud rate setting Pan and tilt speed setting1Move the joystick up or down to select 3. Baudrate 1Move the joystick up or down to select 5. PropDVR address and channel setting DVR address 01−99 ÑCAM SETUP001† 6.DVR03 CH01Channel number 01−16 ÑCAM SETUP001† 6.DVR03 CH16 1Move the joystick up or down to select 6. DVRCamera operations Operating the camera from the system controllerCamera operation buttons OperationCamera operations 1Press the CAM Menu buttonOpen CAM MENU? menu will be displayed Open CAM MENU?Preset position retrieval operation Preset memory operations1Press the Preset Memory button Auxiliary function operationSequence operation Pan operationTour operation Switching the DVR screen display DVR operationSanyo MultiMouse Mode Operating a DVR with mouse function1Press the mouse button Button Left clickAppendices List of auxiliary commands for Sanyo camerasOthers Camera address numbers default value AppendicesExternal dimensions Specifications