Menu settings
9 DVR link setting
The camera images from the DVR which is connected to the system controller switch in line with the camera selection.
(Default setting: ON)
1Move the joystick up or down to select “11. DVR LINK”.
ó | MAIN MENU | í] |
[ñ |
11.DVR LINK: ON
2Move the joystick to the left or right to set the DVR connection (Example: OFF).
ó
[ñ MAIN MENU †] 11.DVR LINK: OFF
Available settings: ON, OFF
3Move the joystick up or down to select “14. SAVE/EXIT”, and then move the joystick to the right.
[ó MAIN MENU ]
14.SAVE/EXIT ·
4Move the joystick to the left or right to select “YES”, and then press the ENT button.
[SAVE / EXIT ]
NO <YES>
The setting will be saved and the display will return to the initial screen.
10 Password setting
You can change the password for the system controller.
(Default setting: No password)
1Move the joystick up or down to select “12. PASSWORD”.
ó
[ñ MAIN MENU ] 12.PASSWORD:****
2Use the numeric buttons to enter a password (Example: 1234) and then press the ENT button.
The password entered will be displayed for approximately 1 second, and then the display will return to the password setting screen.
ó
[ñ MAIN MENU ] 12.PASSWORD:1234
▼
ó
[ñ MAIN MENU ] 12.PASSWORD:****
3Move the joystick up or down to select “14. SAVE/EXIT”, and then move the joystick to the right.
[ó MAIN MENU ]
14.SAVE/EXIT ·
4Move the joystick to the left or right to select “YES”, and then press the ENT button.
[SAVE / EXIT ]
NO <YES>
The setting will be saved and the display will return to the initial screen.
Preparations 18 