Assembly / Installation

	Lubrication and Oil
		Do not attempt to operate this air
CAUTION		Do not attempt to operate this air
		compressor without first verifying

the oil level in the crankcase. This compressor is shipped with oil in the crankcase. Serious damage of the compressor can result from even momentary operation without proper lubrication.

Prior to each use, verify the crankcase oil level.

An oil sight gauge with minimum and maximum oil level marks is provided with this compressor.

Always verify that the oil level is at the maximum

mark in the oil sight gauge before operating this unit. Do not operate the pump with an inad- equate or excessive amount of oil. The cost of failures which occur due to incorrect oil levels will

not be covered under warranty. To check the oil level:

1.Place unit on a level surface.

2.Verify oil level through the oil sight gauge.

Fig. 1

3.If oil level is low, add as required, but do not exceed maximum oil level.

CAUTION Do not allow particulates such as sawdust to fall into crank case when crank case is open for inspection.

Particulates in oil may reduce compressor life.

CAUTION	Do not use a detergent oil in
	crankcase. Detergent oils will leave

deposits on internal compressor components reducing compressor life and performance.

Preparation for Use

WARNING Use this compressor and all accessories in accordance with the instructions. Compressor and accessories

must be used for the purpose for which they are designed. Use of the compressor for operations other than what is described in this manual can result in a hazardous situation.

GASOLINE MOTOR

Follow the instructions before operating a com-

pressor with the gasoline engine:

1.Review “Safety Rules for Gasoline Compressor” on pg. 5 before fueling.

2.Read engine manual accompanying this air compressor for correct engine start-up maintenance procedures.

3.Read and understand the safety labels located on the air compressor.

4.A minimum of 86 octane fuel is recommended for use with this air compressor. DO NOT mix oil with gasoline.

5.Refer to engine manual for recommended gasoline and oil.

6.Check the engine oil level before starting (See engine manual).

7.Fill the fuel tank according to the engine manual instruction.

8.Refer to the engine manual for all necessary maintenance and adjustments.

WARNING Change the crankcase oil after the first 50 hours of operation and as recommended in the maintenance section

of this manual. Failure to change oil according to maintenance schedule will reduce compressor life and performance.

CGT8-65W specifications

The Bosch Power Tools CGT8-65W is a versatile and robust tool designed for both professional and DIY enthusiasts who demand precision and power in their projects. This tool is part of Bosch's innovative line of power tools, known for their reliability, efficiency, and advanced technology.

One of the standout features of the CGT8-65W is its powerful motor, providing consistent performance for a variety of applications. Whether you are cutting, drilling, or fastening, the motor ensures that the tool delivers optimal power without compromising on speed or precision. This makes it particularly suitable for tasks that require a high level of accuracy and control.

The CGT8-65W is engineered with advanced battery technology, allowing for extended runtime and quick charging capabilities. The lithium-ion battery ensures that users can work longer without interruptions, making it ideal for those large projects where time efficiency is crucial. Furthermore, the tool features an energy-saving mode that conserves battery life, allowing users to maximize their working time.

In terms of usability, the CGT8-65W incorporates an ergonomic design that prioritizes user comfort. The soft-grip handle reduces vibration and fatigue, enabling extended use without discomfort. This feature is particularly valuable for professionals who may use the tool for several hours at a stretch. Additionally, the tool's lightweight construction makes it easy to handle and maneuver, adding to its overall convenience.

The CGT8-65W also boasts a cooling system that prevents overheating during heavy use. This technology not only prolongs the life of the tool but also enhances its performance, ensuring that it operates efficiently under demanding conditions. Safety features are integrated into the design, including a safety switch that prevents accidental activation, providing peace of mind for users.

Another noteworthy characteristic of the CGT8-65W is its versatility. It is compatible with a wide range of accessories and attachments, enabling users to tackle various tasks with ease. Whether you are working with wood, metal, or plastic, this tool can adapt to meet the demands of each project.

Overall, the Bosch Power Tools CGT8-65W stands out as an exceptional tool that combines power, comfort, and technology. With its high-performance motor, advanced battery management, ergonomic design, and safety features, it represents an ideal choice for anyone looking to enhance their toolkit with a reliable, high-quality power tool. Whether you’re a seasoned professional or an eager DIYer, the CGT8-65W is engineered to deliver excellent results every time.