Skil 3375-01 manual Installing table assembly

Page 10

SM 2610957110 05-08 6/5/08 7:36 AM Page 10

Assembly and adjustments

Installing table assembly

(Fig. 5 & 6)

1.Position table support (1) against table (2) and align the holes.

2.Using three M6 hex nuts (3), three spring lock washers (4), and three flat washers (5), fasten the table support to the work table (Figure 5).

3.Position the table support in the corresponding holes on the side of the base, as shown in figure 6. Ensure that the 9.5 mm diameter index pin aligns with the upper hole.

4.Place a 6.5 mm washer (6) and a tooth lock washer

(7) on the end of the table lock knob (8) and insert through the table support slot and into the threaded hole of base (Figure 6).

To avoid trapping the work or ! WARNING fingers between the table and

sanding surface, the table edge should be a maximum of 1-2 mm from sanding surface.

5. Loosen the three hex head nuts at bottom of table support and adjust table as required. Adjust table as necessary and retighten.

FIG. 5

3

 

4

 

5

 

2

 

1

FIG. 6

7

6

8

10.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents 3375-01 Personal Safety General Safety RulesWork Area Tool Use Additional Safety RulesTool Care Think Safety Motor Specifications Motor Specifications and Electrical RequirementsGeneral Specifications Connection To a Power SourceTable of Contents Unpacking and Checking Contents Mounting holes On/off switchBase Miter GuageInstalling sanding disc and guard Assembly and adjustmentsInstalling work support Fig Installing table assembly Auxiliary mounting for vertical sanding Installing the sanding belt tensioning Tracking Fig Mounting belt and disc sander to Workbench Fig Bevel sanding Fig OperationTurning on and off Fig Positioning belt bed FigSurface sanding on the sanding belt End sanding on the sanding beltSanding small end surfaces on the sanding disc Fig Sanding curved edgesAlways sand inside curves on idler drum as shown in figure Accessories TroubleshootingMaintenance Maintaining Your Belt/Disc SanderLieu de travail Consignes générales de sécuritéSécurité personnelle Emploi de l’outil Consignes de sécurité additionnellesEntretien de l’outil Un autre accessoire approuvé ET LES Consignes DE Sécurité QUISpécifications du moteur Spécifications du moteur et spécifications électriquesSpécifications générales Raccordement à une source d’alimentationConnaissance élémentaire de votre Table des matièresOpérations de base avec votre Tableau des pièces en vrac Déballage et inspection du contenuArticle Description Trous de montage Interrupteur de marche/arrêtOn/Off Plaque de ponçageAssemblage et réglages Installation du support de l’ouvrage FigMaintenez le support de l’ouvrage en position, puis serrez Installation de l’ensemble de table Positionnez le support de contre la , et alignez les trousMontage auxiliaire pour ponçage vertical Serrez à nouveau la vis de blocageDe la tension et de l’alignement Fig Montage de la ponceuse à courroie et Disque sur l’établi Fig Insérez deux vis M8 et serrez les écrous hexagonauxMise en marche et à l’arrêt Fig UtilisationPonçage en position angulaire Fig De ponçage Fig Ponçage en surface sur la courroie de ponçagePonçage de bords recourbés Le disque de ponçage FigEntretien de votre ponceuse à courroie/à disque Diagnostic de dépannageAccessoires EntretienÁrea de trabajo Normas generales de seguridadSeguridad personal Uso de la herramienta Normas de seguridad adicionalesCuidado de la herramienta Advertencia 12. Piense EN LA Seguridad Sentido DE Avance Para Lijar CON TamborDe comenzar a utilizar la herramienta eléctrica Especificaciones del motor Especificaciones del motor y requisitos eléctricosEspecificaciones generales Conexión a una fuente de alimentaciónÍndice Tabla de piezas sueltas Desempaquetado y comprobación del contenidoDescripcion Cant Familiarización con la lijadora de correa/disco Ensamblaje y ajustes Instalación del disco de lijar y el protectorInstalación del ensamblaje de la mesa Montaje auxiliar para realizar lijado vertical De la trayectoria Fig Banco de trabajo Fig Encendido y apagado UtilizaciónLijado en bisel Fig Lijado de extremos en la correa de lijar Fig Lijado de bordes curvos y Disco de lijar FigMantenimiento Resolución de problemasMantenimiento de la lijadora AccesoriosSM 2610957110 05-08 6/5/08 736 AM SM 2610957110 05-08 6/5/08 736 AM 2610957110 05/08

3375-01 specifications

The Skil 3375-01 is a versatile and powerful tool designed to meet the needs of both professionals and DIY enthusiasts. It is a laser guide saw that stands out in the market due to its impressive features and advanced technologies. This tool is particularly celebrated for its precision and ease of use, making it an invaluable addition to any workshop.

One of the key features of the Skil 3375-01 is its Laser Guide System, which provides an accurate line of sight, allowing users to make precise cuts with confidence. This innovative feature significantly enhances cutting accuracy, ensuring that projects are executed flawlessly. The laser is easy to activate and adjust, giving users optimal visibility when working on various materials.

The saw is equipped with a robust 6.5-amp motor, which delivers ample power for a range of cutting applications. It can easily slice through hardwood, softwood, and laminate, making it suitable for tasks ranging from home improvement projects to professional woodworking. The motor's efficiency ensures that it operates smoothly, even under heavy loads.

Another notable characteristic of the Skil 3375-01 is its ease of use. The saw features a lightweight and compact design, allowing for comfortable handling and maneuverability. It also comes with a spindle lock, which facilitates quick and easy blade changes, minimizing downtime during projects. The ergonomically designed handle provides a secure grip, contributing to user comfort during extended use.

Safety is prioritized with the Skil 3375-01, which includes a blade guard that shields users from accidental contact with the blade. The saw's stable base ensures steadiness during operation, further enhancing safety.

The built-in dust port is an additional feature that keeps the workspace clean, effectively directing sawdust away from the cutting area. This not only promotes a clearer line of sight but also contributes to a safer working environment.

In summary, the Skil 3375-01 is a well-rounded tool that combines powerful performance with user-friendly features. Its laser guide, efficient motor, lightweight design, and safety mechanisms make it a top choice for anyone looking to achieve precise cuts with ease. Whether for professional use or home projects, the Skil 3375-01 meets a variety of cutting needs while ensuring user satisfaction.
Top Page Image Contents