Skil 3375-01 manual Maintaining Your Belt/Disc Sander, Troubleshooting, Maintenance, Accessories

Page 17

SM 2610957110 05-08 6/5/08 7:36 AM Page 17

Maintaining Your Belt/Disc Sander

Maintenance

To reduce the risk of injury, turn ! WARNING power switch “OFF” and remove

plug from the power source outlet before maintaining or lubricating your sander.

GENERAL

Frequently blow out any dust that may accumulate inside the motor.

An occasional coat of paste wax on the work table will allow the wood being cut to glide smoothly across the work surface.

! CAUTION

Certain

cleaning

agents and

solvents

damage

plastic parts.

Including:

gasoline,

carbon

tetrachloride,

chlorinated cleaning solvents, ammonia and household detergents that contain ammonia. Avoiding use of these and other types of cleaning agents minimizes the probability of damage.

To avoid shock or fire hazard, if the ! WARNING power cord is worn, cut or damaged

in any way, have it replaced immediately.

All repairs, electrical or mechanical, ! WARNING should be attempted only by trained

repairmen. Contact the nearest Skil Factory Service Center, Authorized Skil Service Station or other com- petent repair service. Use only Skil replacement parts; any other may create a hazard.

Accessories

Use only recommended accessories. Follow instructions that accompany accessories. Use of improper accessories may cause hazards.

Troubleshooting

!WARNING Turn switch “OFF” and always remove plug from the power source before trouble

shooting.

TROUBLE: WILL NOT START

PROBLEM 1. Power cord is not plugged in.

2.Fuse or circuit breaker tripped.

3.Cord damaged.

4.Burned out switch.

REMEDY 1. Plug in.

2.Replace fuse or reset tripped circuit breaker.

3.Have cord replaced by an Authorized Skil Service Center or Service Station.

4.Have switch replaced by an Authorized Skil Service Center or Service Station.

TROUBLE: DOES NOT COME UP TO SPEED

PROBLEM 1. Extension cord too light or too long. 2. Low house voltage.

REMEDY 1. Replace with adequate cord. 2. Contact your electric company.

17.

Page 16 Page 18
Image 17
Page 16 Page 18
Contents 3375-01 Work Area General Safety RulesPersonal Safety Tool Care Additional Safety RulesTool Use Think Safety General Specifications Motor Specifications and Electrical RequirementsMotor Specifications Connection To a Power SourceTable of Contents Unpacking and Checking Contents Base On/off switchMounting holes Miter GuageInstalling work support Fig Assembly and adjustmentsInstalling sanding disc and guard Installing table assembly Auxiliary mounting for vertical sanding Installing the sanding belt tensioning Tracking Fig Mounting belt and disc sander to Workbench Fig Turning on and off Fig OperationBevel sanding Fig Positioning belt bed FigEnd sanding on the sanding belt Surface sanding on the sanding beltAlways sand inside curves on idler drum as shown in figure Sanding curved edgesSanding small end surfaces on the sanding disc Fig Maintenance TroubleshootingAccessories Maintaining Your Belt/Disc SanderSécurité personnelle Consignes générales de sécuritéLieu de travail Entretien de l’outil Consignes de sécurité additionnellesEmploi de l’outil ET LES Consignes DE Sécurité QUI Un autre accessoire approuvéSpécifications générales Spécifications du moteur et spécifications électriquesSpécifications du moteur Raccordement à une source d’alimentationOpérations de base avec votre Table des matièresConnaissance élémentaire de votre Article Description Déballage et inspection du contenuTableau des pièces en vrac On/Off Interrupteur de marche/arrêtTrous de montage Plaque de ponçageMaintenez le support de l’ouvrage en position, puis serrez Installation du support de l’ouvrage FigAssemblage et réglages Positionnez le support de contre la , et alignez les trous Installation de l’ensemble de tableSerrez à nouveau la vis de blocage Montage auxiliaire pour ponçage verticalDe la tension et de l’alignement Fig Insérez deux vis M8 et serrez les écrous hexagonaux Montage de la ponceuse à courroie et Disque sur l’établi FigPonçage en position angulaire Fig UtilisationMise en marche et à l’arrêt Fig Ponçage en surface sur la courroie de ponçage De ponçage FigLe disque de ponçage Fig Ponçage de bords recourbésAccessoires Diagnostic de dépannageEntretien de votre ponceuse à courroie/à disque EntretienSeguridad personal Normas generales de seguridadÁrea de trabajo Cuidado de la herramienta Normas de seguridad adicionalesUso de la herramienta De comenzar a utilizar la herramienta eléctrica Sentido DE Avance Para Lijar CON TamborAdvertencia 12. Piense EN LA Seguridad Especificaciones generales Especificaciones del motor y requisitos eléctricosEspecificaciones del motor Conexión a una fuente de alimentaciónÍndice Descripcion Cant Desempaquetado y comprobación del contenidoTabla de piezas sueltas Familiarización con la lijadora de correa/disco Instalación del disco de lijar y el protector Ensamblaje y ajustesInstalación del ensamblaje de la mesa Montaje auxiliar para realizar lijado vertical De la trayectoria Fig Banco de trabajo Fig Lijado en bisel Fig UtilizaciónEncendido y apagado Lijado de extremos en la correa de lijar Fig Disco de lijar Fig Lijado de bordes curvos yMantenimiento de la lijadora Resolución de problemasMantenimiento AccesoriosSM 2610957110 05-08 6/5/08 736 AM SM 2610957110 05-08 6/5/08 736 AM 2610957110 05/08

3375-01 specifications

The Skil 3375-01 is a versatile and powerful tool designed to meet the needs of both professionals and DIY enthusiasts. It is a laser guide saw that stands out in the market due to its impressive features and advanced technologies. This tool is particularly celebrated for its precision and ease of use, making it an invaluable addition to any workshop.

One of the key features of the Skil 3375-01 is its Laser Guide System, which provides an accurate line of sight, allowing users to make precise cuts with confidence. This innovative feature significantly enhances cutting accuracy, ensuring that projects are executed flawlessly. The laser is easy to activate and adjust, giving users optimal visibility when working on various materials.

The saw is equipped with a robust 6.5-amp motor, which delivers ample power for a range of cutting applications. It can easily slice through hardwood, softwood, and laminate, making it suitable for tasks ranging from home improvement projects to professional woodworking. The motor's efficiency ensures that it operates smoothly, even under heavy loads.

Another notable characteristic of the Skil 3375-01 is its ease of use. The saw features a lightweight and compact design, allowing for comfortable handling and maneuverability. It also comes with a spindle lock, which facilitates quick and easy blade changes, minimizing downtime during projects. The ergonomically designed handle provides a secure grip, contributing to user comfort during extended use.

Safety is prioritized with the Skil 3375-01, which includes a blade guard that shields users from accidental contact with the blade. The saw's stable base ensures steadiness during operation, further enhancing safety.

The built-in dust port is an additional feature that keeps the workspace clean, effectively directing sawdust away from the cutting area. This not only promotes a clearer line of sight but also contributes to a safer working environment.

In summary, the Skil 3375-01 is a well-rounded tool that combines powerful performance with user-friendly features. Its laser guide, efficient motor, lightweight design, and safety mechanisms make it a top choice for anyone looking to achieve precise cuts with ease. Whether for professional use or home projects, the Skil 3375-01 meets a variety of cutting needs while ensuring user satisfaction.
Top Page Image Contents