Skil 2364 manual General Power Tool Safety Warnings, Work area safety, Electrical safety

Page 2

BM 1619X03886 07-09:BM 1619X03886 07-09 7/23/09 10:54 AM Page 2

General Power Tool Safety Warnings

!WARNING Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE

The term “power tool” in all of the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Work area safety

Keep work area clean and well lit. Cluttered or dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical safety

Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

If operating the power tool in damp locations is unavoidable, use a Ground Fault Circuit Interrupter (GFCI) protected supply. Use of an GFCI reduce the risk of electric shock.

Personal safety

Stay alert, watch what you are doing and use common sense when operating a

power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and / or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.

Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust- related hazards.

Power tool use and care

Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

-2-

Image 2
Contents See Voir Ver la página BM 1619X03886 07-09BM 1619X03886 07-09 7/23/09 1054 AMCall Toll Free for Electrical safety General Power Tool Safety WarningsWork area safety Personal safetyBattery tool use and care ServiceSafety Rules for Cordless Drill / Drivers Nails, screws, keys, etc. Fire or injury may result Battery/ChargerBattery Care LITHIUM-ION Batteries Battery DisposalBATTERy Removal Instructions Symbols Symbol Name Designation/ExplanationGear Shifter Functional Description and SpecificationsCordless Drill/Driver Chuck SleeveAssembly Operating InstructionsOperating Tips Running Nuts and Bolts Model SC72Li ChargerDrilling Metal Important Charging NotesMaintenance CleaningProblem Trouble Tool will not Start AccessoriesTrouble Shooting Trouble BATTERy will not ChargeSécurité du lieu de travail Sécurité électriqueEntretien Utilisation et entretien des outils ÉlectroportatifsUtilisation et entretien des outils à piles Le plomb provenant des peintures à base de plomb Consignes de sécurité pour perceuses/tournevis sans cordonNe faites pas fonctionner la perceuse en la portant Chargeur de pile Entretien des pilesPiles LITHIUM-ION Mise au rebut des pilesInstructions de retrait de pile Symboles Symbole Nom Désignation/ExplicationTension nominale Capacité de la douille Perceuse/visseuse sans fil2363 ChargeurAssemblage Consignes de fonctionnementConsignes de fonctionnement Avant Dutiliser Modèle SC72Li ChargerPerçage DES Métaux Pose DES Écrous ET DES BoulonsEntretien NettoyageProblème L’OUTIL NE Démarre PAS AccessoiresGuide de diagnostic Problème LE BLOC-PILES NE Charge PASSeguridad personal Seguridad del área de trabajoSeguridad eléctrica Servicio de ajustes y reparaciones MecánicasUso y cuidado de las herramientas Alimentadas por baterías BM 1619X03886 07-09BM 1619X03886 07-09 7/23/09 1054 AM Batería/cargador Cuidado de las bateríasInstrucciones para sacar la batería Tenga la amabilidad de llamar al 1-800-8-BATTERY paraEliminación de las baterías Baterías DE Iones DE LitioCon aislamiento doble SímbolosSímbolo Nombre Designación/explicación De Li-ionDescripción funcional y especificaciones Taladro/destornillador sin cordónEnsamblaje Instrucciones de funcionamientoSujecion CON Tornillos Consejos de funcionamientoTaladrado CON Velocidad Variable Brocas Para TaladroApriete DE Tuercas Y Pernos Modelo SC72Li CargadorTaladrado DE Metal Notas Importantes Para CargarLimpieza MantenimientoServicio Avería EL Paquete DE Batería no SE Carga AccesoriosAvería LA Herramienta no Arranca BM 1619X03886 07-09BM 1619X03886 07-09 7/23/09 1054 AM Remarques Notas BM 1619X03886 07-09BM 1619X03886 07-09 7/23/09 1054 AM