Functional Description, Carton Contents

FUNCTIONAL DESCRIPTION

FOREWORD

Delta’s 12" Radial Arm Saws are built for capacity with versatility. They have a full 3¾" depth of cut at 90°, and 2½" depth of cut at 45°. The saws can crosscut 14-3/8" in a single pass. They also have a unique turret arm action which permits the motor assembly to rotate 360° above the work table.

NOTICE: THE PHOTO ON THE MANUAL COVER ILLUSTRATES THE CURRENT PRODUCTION MODEL. ALL OTHER ILLUSTRATIONS CONTAINED IN THE MANUAL ARE REPRESENTATIVE ONLY AND MAY NOT DEPICT THE ACTUAL COLOR, LABELING OR ACCESSORIES AND ARE INTENDED TO ILLUSTRATE TECHNIQUE ONLY.

CARTON CONTENTS

A B CD EF

J I

O R

L	M	T
L	M	P
		P
		U
	N	Q
	N

A.Fence

B.Table boards (4)

C.Table

D.Table mounting bracket (2)

E.Track arm end cap and stop

F.Overarm elevating handle

G.Cutting head clamp

H.Wrenches

I.Legs (4)

J.12" blade

K.Special wrench socket

L.1/4"-20x1/2" hex head cap screw

M. 5/16" lock washer (2) N. Round head screw (4)

O. 5/16"-18x3/4" button head screws P. Sheer pin

Q. 1/4" flat washer R. 5/16" flat washer S. 5/16" flat washer T. 5/16" hex nut

U. 5/16" carriage head bolt V. Cuttinghead assembly

W. Base and overarm assembly

UNPACKING AND CLEANING

Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.