Porter-Cable 33-890, 33-892, 33-891, 33-895X instruction manual Service, Accessories, Warranty

Page 29

5.Clean brake shoe and brake disc (F) to remove any dust and oil build up.

6.Place disc and brake mechanism onto shaft. Place two

.020" shims (G) between disc and brake shoe. See photo above for proper shim placement.

7.Push brake mechanism toward disc until the flyweights

(H) expand and firm resistance is felt. Carefully hold

brake mechanism in this position while securely tightening the two setscrews loosened in Step 3 above.

8.Remove the two shims and replace the plastic cover taking care to center the brake disc in the shoulder around the plastic cover outer circumference.

9.Test run motor to insure brake is not dragging during operation.

SERVICE

PARTS, SERVICE OR WARRANTY ASSISTANCE

All Delta Machines and accessories are manufactured to high quality standards and are serviced by a network of Porter-Cable Delta Factory Service Centers and Delta Authorized Service Stations. To obtain additional information regarding your Delta quality product or to obtain parts, service, warranty assistance, or the location of the nearest service outlet, please call 1-800-223-7278 (In Canada call 1-800-463-3582).

ACCESSORIES

A complete line of accessories is available from your Delta Supplier, Porter-Cable • Delta Factory Service Centers, and Delta Authorized Service Stations. Please visit our Web Site www.deltamachinery.com for a catalog or

for the name of your nearest supplier.

Since accessories other than those offered by Delta have not been tested with this product, use of such accessories could be hazardous. For safest operation, only Delta recommended accessories should be used with this product.

WARRANTY

Two Year Limited New Product Warranty

Delta will repair or replace, at its expense and at its option, any new Delta machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a Delta factory service center or authorized service station with proof of purchase of the product within two years and provides Delta with reasonable opportunity to verify the alleged defect by inspection. For all refurbished Delta product, the warranty period is 180 days. Delta may require that electric motors be returned prepaid to a motor manufacturer’s authorized station for inspection and repair or replacement. Delta will not be responsible for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration made or specifically authorized by anyone other than an authorized Delta service facility or representative. Under no circumstances will Delta be liable for incidental or consequential damages resulting from defective products. This warranty is Delta’s sole warranty and sets forth the customer’s exclusive remedy, with respect to defective products; all other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly disclaimed by Delta.

29

Image 29
Contents Radial Arm Saw Important Safety Instructions Table of ContentsCalifornia Proposition Safety Guidelines DefinitionsGeneral Safety Rules Avoid Kickback by Additional Safety Rules for Radial ARM SawsMotor Specifications Power ConnectionsThree Phase Operation Grounding InstructionsMinimum Gauge Extension Cord Extension CordsFunctional Description Carton ContentsAssembly Tools Required AssemblyDisconnect Machine from Power Source Guide to PartsAssembling Overarm Elevating Handle Assembling Legs to BaseAssembling Cuttinghead to Track ARM AB CPage Assembling Starter BOX to Base 33-891 and 33-892 Models Adjusting Table Brackets Parallel to Track ARM Page Assembling Table Clamps and Table Clamp Rods Assembling SAW Blade and Blade Guard Assembling Table BoardsStarting and Stopping SAW Locking Switch in OFF PositionOperation Adjusting Yoke Clamp Handle Adjusting Overarm ColumnAdjusting Track Rods Adjusting Cuttinghead Ball Bearings Against Track RodsAdjusting Blade Square with Table TOP Adjusting Track ARM Clamp Handle Adjusting SAW Travel Square with Fence CROSS-CUT Stop Removing Heeling in SAW CUTAssembling Accessory Moulding Cutterhead Guard Adjusting Blade Guard and ANTI-KICKBACK RODAdjusting Track ARM Stop Miter Cutting CROSS-CUTTINGRipping Compound Miter CuttingOUT-RIPPING IN-RIPPINGConstructing a Push Stick PushstickDisconnect Machine from the Power Source Troubleshooting Guide MaintenanceWarranty ServiceAccessories Page Page Canadian PORTER-CABLE Delta Service Centers