AC WIRING NOTES FOR THE MOBILE FX
AC HOT OUT
•Supplies the AC hot output conductors through a 30 amp maximum AC branch rated circuit breaker using 6 AWG wire and connect to the AC
AC NEUTRAL OUT/AC NEUTRAL IN
•Connects the AC neural input conductor to the AC NEUTRAL IN terminal.
•Connects the AC neutral output conductor to the AC NEUTRAL OUT terminal.
•Do not assume these terminals are common in the Mobile FX.
����������
��������������
��������������
� � � � � � � � � � � � �
� � � � � � � � � �
� � � � � � � � � � � � � � � �
���������������
CHASSIS GROUND
•Connects both the AC input and AC output ground conductors to the CHASSIS GROUND and NEU/GROUND BOND terminals.
•If there is only one Mobile FX in the system, leave the copper bus (provided) installed between the CHASSIS GROUND and NEU/ GROUND BOND terminals. If there is more than one Mobile FX in the system, remove
the copper bus from every Slave FX.
AC HOT IN
•The AC hot input conductor (black) must be supplied through a 30 amp maximum AC branch rated circuit breaker and connected to the AC HOT IN.
•6 AWG wire is required for the FX’s AC transfer switch.
| ������������� |
|
| |||
|
| ��������� |
|
| ||
��������������� �������� | ������ | ���� | ���� | ���� | ���� |
|
�������������� |
| |||||
| �������� |
|
| |||
����������� | �� | ��� | �������� | �������� | ||
| ����� | ����� | ||||
������ |
|
| ������ | |||
14