Multiquip DFG Series manual Explanation of Code in Remarks Column

Page 52

EXPLANATION OF CODE IN REMARKS COLUMN

The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions.

NOTICE

The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availability of the parts listed.

SAMPLE PARTS LIST

NO.

PART NO.

PART NAME

QTY.

REMARKS

1

12345

BOLT

1

INCLUDES ITEMS W/%

2%

 

WASHER, 1/4 IN

NOT SOLD SEPARATELY

2%

12347

WASHER, 3/8 IN.

..1

MQ-45T ONLY

312348 HOSE ..................A/R ...MAKE LOCALLY

412349 BEARING ..............1 .....S/N 2345B AND ABOVE

NO. Column

Unique Symbols — All items with same unique symbol

(@, #, +, %, or >) in the number column belong to the same assembly or kit, which is indicated by a note in the “Remarks” column.

Duplicate Item Numbers — Duplicate numbers indicate multiple part numbers, which are in effect for the same general item, such as different size saw blade guards in use or a part that has been updated on newer versions of the same machine.

NOTICE

When ordering a part that has more than one item number listed, check the remarks column for help in determining the proper part to order.

PART NO. Column

Numbers Used — Part numbers can be indicated by a number, a blank entry, or TBD.

TBD (To Be Determined) is generally used to show a part that has not been assigned a formal part number at the time of publication.

A blank entry generally indicates that the item is not sold separately or is not sold by Multiquip. Other entries will

QTY. Column

Numbers Used — Item quantity can be indicated by number, a blank entry, or A/R.

A/R (As Required) is generally used for hoses or oth parts that are sold in bulk and cut to length.

A blank entry generally indicates that the item is not so separately. Other entries will be clarifi ed in the “Remark Column.

REMARKS Column

Some of the most common notes found in the “Remark Column are listed below. Other additional notes neede to describe the item can also be shown.

Assembly/Kit — All items on the parts list with th same unique symbol will be included when this item purchased.

Indicated by:

“INCLUDES ITEMS W/(unique symbol)”

Serial Number Break — Used to list an effective ser number range where a particular part is used.

Indicated by:

“S/N XXXXX AND BELOW” “S/N XXXX AND ABOVE” “S/N XXXX TO S/N XXX”

Specific Model Number Use — Indicates that the pa is used only with the specifi c model number or mod number variant listed. It can also be used to show part is NOT used on a specifi c model or model numb variant.

Indicated by:

“XXXXX ONLY”

“NOT USED ON XXXX”

“Make/Obtain Locally” — Indicates that the part ca be purchased at any hardware shop or made out available items. Examples include battery cables, shim and certain washers and nuts.

“Not Sold Separately” — Indicates that an item cann be purchased as a separate item and is either part of a assembly/kit that can be purchased, or is not availab

DFG-SERIES SURFACE GRINDERS

OPERATION AND PARTS MANUAL REV #4 (05/28/09)

PAGE 52

 

 

 

Page 51 Page 53
Image 52
Page 51 Page 53
Contents Electric Gasoline Page Table of Contents Table of Contents Page Parts Ordering Procedures Page Page Operator Instructional Data Sheet Safety Precautions Safety Precautions Operation MAINTENANCE, Repair and Storage Surface GrinderSafety Precautions Removing the Surface Grinder from the Pallet AssemblyApplication All Models Installing the SG24-1000 Safety and Dust Shield Assembly KIT Before Starting the Engine Filling the Engine Crankcase with OILApplications DFG/G Surface Grinder Filling the DFG/G Series Engine Fuel TankMULTI-ACCESSORY Attachments and Applications OperationTheory of Operation Grinding StonesTungsten Carbide Grinding Block Scarifier BlocksStar Flail Beam FlailPentagonal Flail Spacer WasherWire brushes Scarifier Block BushingFloor Brushes SCRAPE-R-TACH Industrial Floor Coatings Removal SystemAssembly INSTRUCTIONS/OPERATIONS Follow all safety precautions for the safety solvent Diamond Segment Block Assembly INSTRUCTIONS/OPERATIONS From the Counterrotating Discs Assembly INSTRUCTIONS/OPERATIONS Adjusting the Operator Handle HEIGHT. Application All Models Assembly INSTRUCTIONS/OPERATIONS Assembly INSTRUCTIONS/OPERATIONS Operating the Surface Grinder on the Jobsite Result in Property Damage AND/OR Personal Injury FiureAssembly INSTRUCTIONS/OPERATIONS Application All Models Early Age Grinding Stopping the DFG/G Series Gasoline Powered Surface GrinderDefinitions of floor flatness and levelness How to Define Surface Regularity Defined Versus Random Traffic PatternsTR 34 tolerances for defined traffic floors Assembly INSTRUCTIONS/OPERATIONS Maintenance/Service MAINTENANCE/SERVICEPreventative Maintenance Check LIST. Application All Models Observe all applicable safety precautions for the solvent MAINTENANCE/SERVICE Checking V-BELT Tension and Alignment MAINTENANCE/SERVICE Lubrication Requirements Electric Motor Service Engine ServiceTroubleshooting TroubleshootingOperational PROBLEMS. Application All Models Uneven MULTI-ACCESSORY Attachment WearAccelerated V-BELT Wear Accelerated Bearing Wear AND/OR FailureStorage StorageSpecifications GeneralPage Explanation of Code in Remarks Column Suggested Spare Parts Units Gasoline EngineUnits Electric Motor Model Qty DescriptionOperator Handle ASSY. Electric Operator Handle ASSY. ElectricHANDLE, Operator Universal HP Motor onlyCABLE, Long CABLE, ShortOperator Handle ASSY. Gasoline Operator Handle ASSY. GasolineKNOB, Throttle Control CABLE, ThrottleQTY Remarks Electric Motor Assy Electric Motor AssyMOUNT, Electric Motor HP 50 HZ MotorSCREW, CAP 5/16-18 UNC X 1 Plated WASHER, Flat 5/16, PlatedGasoline Engine Assy Gasoline Engine AssyENGINE, Honda 11 H.P MOUNT, Gasoline EngineCLUTCH, Pulley Assy CAP, OIL DrainWheel Assy Wheel AssyARM, Swing WheelAXLE, Plated WASHER, Flat ¾ PlatedTransmission Assy Transmission AssyFRAME, Main COVER, TransmissionBEARING, Flange WASHER, Lock 5/16 PlatedHead Assy Head AssyDISC, MULTI- Accessory LH DISC, MULTI- Accessory RHBAR, Mounting DISC, MountingSafety and Dust Shield Assy Safety and Dust Shield AssySkirt Assembly SKIRT, GrinderWASHER, Fender 1/4 , Plated STRAP, SkirtScarifier Assy Scarifier AssyHousing BushingNUT, HEX 3/8 UNC, Nylock Plated WEDGE, PlasticSCRAPE-R-TACH Assy HOLDER, Insert MOUNT, RubberSpacer INSERT, Tungsten CarbideGrinding Block Assy Block RingAggress Grinding General PurposeDecals DecalsDecals Part Name QTY Remarks DECAL, WarningDECAL, Operation DECAL, ThrottlePayment Terms Page HERE’S HOW to GET Help

DFG Series specifications

The Multiquip DFG Series stands out in the equipment industry due to its powerful performance and advanced technology tailored for a variety of applications. Engineered for durability and efficiency, the DFG Series is specifically designed to meet the demanding needs of contractors, making it an ideal choice for construction, demolition, and industrial projects.

One of the hallmark features of the DFG Series is its robust construction. Built with high-quality materials, these models are engineered to withstand harsh working conditions, providing longevity even in the toughest environments. The frames are designed for superior strength, while the engine components are optimized for reliability, ensuring that the equipment remains operational when it's needed the most.

In terms of performance, the DFG Series is equipped with state-of-the-art engines that deliver exceptional power while maintaining fuel efficiency. This balance reduces operating costs and minimizes environmental impact. Users can benefit from increased productivity as these machines are capable of handling heavy loads and challenging tasks with ease.

One of the standout technologies in the DFG Series is the advanced hydraulic system. This system allows for smooth and efficient operation, enabling the equipment to perform a wide range of tasks from lifting and moving materials to grading and leveling. The hydraulics are engineered for precise control, providing operators with enhanced maneuverability and flexibility on job sites.

Additionally, the DFG Series incorporates ergonomic design features aimed at enhancing user comfort and safety. The operator's cabin is spacious and well-appointed with intuitive controls, allowing for easy operation even during long hours of use. Safety is a priority, with features such as reinforced safety barriers, automatic shut-off systems, and well-placed visibility options to ensure that operators remain aware of their surroundings.

Maintenance is made simple with the DFG Series, which is designed with accessibility in mind. Key components are easily reachable, reducing downtime during servicing and ensuring that the equipment remains in peak operating condition.

Overall, the Multiquip DFG Series blends power, technology, and user-friendly design to provide a versatile solution for today's demanding construction and industrial applications. Whether tasked with heavy lifting, demolition, or ground preparation, the DFG Series remains a reliable choice that will exceed expectations.
Top Page Image Contents