Multiquip DFG Series manual Floor Brushes, SCRAPE-R-TACH Industrial Floor Coatings Removal System

Page 23

ASSEMBLY INSTRUCTIONS/OPERATIONS

Wire brushes are available in a number of flat wire sizes and resulting configurations. With continuous use, the flat wire will take a "set" that can limit effectiveness and overall productivity. FIGURE 13. For best results, flat wire brushes should be rotated end for end in the aluminum multi-accessory discs a minimum of once for every one hour of operation. External weight applied to the SURFACE GRINDER will not normally increase productivity rates and only accelerate flat wire wear rates.

FIGURE 13

Floor Brushes

Eleven inch diameter, silicon carbide impregnated, floor brushes are available in a number of styles and designs for general maintenance and cleaning projects. FIGURE 14. They are especially effective cleaning soiled concrete floors with the addition of water soluble solvents. These types of brushes are directly mounted to the multi-accessory discs with the included 1/2 inch x 2 inch long Grade 5 capscrews. A kidney shaped drive plate is provided on the back side of the brush. This drive plate fits into a recess provided in the multi-accessory disc. FIGURE 15. To maximize bristle service life, it is recommended that the silicon impregnated brushes be rotated between multi-accessory discs a minimum of once for every one hour of operation.

FIGURE 15

SCRAPE-R-TACH® Industrial Floor Coatings Removal System

This multi-accessory attachment is designed to remove many urethanes, epoxies, paints, mastics and other, similar material accumulations from concrete floor surfaces. FIGURE 16. Each assembly utilizes two tungsten carbide inserts set at a precise angle. The rotating inserts "cut and shave" against the work surface material with a "scraping" action that removes materials with highly productive results. To increase the effectiveness of the inserts, the scraper block design incorporates a Lord® type rubber mount that helps absorb damaging shocks while allowing the inserts to more easily follow local variations in the surface contour. Units are secured to the machine with plastic wedges.

FIGURE 16

The productivity of the product is directly dependent upon the yield and tensile strength of the material being removed. Material thickness has also shown

FIGURE 14to have a direct effect on overall productivity. For example, the SCRAPE-R-TACH system is a highly productive method for removing thick paint accumulations from factory floors. Production rates

DFG-SERIES SURFACE GRINDERS

OPERATION AND PARTS MANUAL REV #4 (05/28/09)

PAGE 23

 

 

 

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Electric Gasoline Page Table of Contents Table of Contents Page Parts Ordering Procedures Page Page Operator Instructional Data Sheet Safety Precautions Safety Precautions Operation Surface Grinder MAINTENANCE, Repair and StorageSafety Precautions Application All Models AssemblyRemoving the Surface Grinder from the Pallet Installing the SG24-1000 Safety and Dust Shield Assembly KIT Filling the DFG/G Series Engine Fuel Tank Before Starting the EngineFilling the Engine Crankcase with OIL Applications DFG/G Surface GrinderGrinding Stones MULTI-ACCESSORY Attachments and ApplicationsOperation Theory of OperationScarifier Blocks Tungsten Carbide Grinding BlockBeam Flail Star FlailSpacer Washer Pentagonal FlailScarifier Block Bushing Wire brushesSCRAPE-R-TACH Industrial Floor Coatings Removal System Floor BrushesAssembly INSTRUCTIONS/OPERATIONS Follow all safety precautions for the safety solvent Diamond Segment Block Assembly INSTRUCTIONS/OPERATIONS From the Counterrotating Discs Assembly INSTRUCTIONS/OPERATIONS Adjusting the Operator Handle HEIGHT. Application All Models Assembly INSTRUCTIONS/OPERATIONS Assembly INSTRUCTIONS/OPERATIONS Operating the Surface Grinder on the Jobsite Fiure Result in Property Damage AND/OR Personal InjuryAssembly INSTRUCTIONS/OPERATIONS Definitions of floor flatness and levelness Stopping the DFG/G Series Gasoline Powered Surface GrinderApplication All Models Early Age Grinding Defined Versus Random Traffic Patterns How to Define Surface RegularityTR 34 tolerances for defined traffic floors Assembly INSTRUCTIONS/OPERATIONS Preventative Maintenance Check LIST. Application All Models MAINTENANCE/SERVICEMaintenance/Service Observe all applicable safety precautions for the solvent MAINTENANCE/SERVICE Checking V-BELT Tension and Alignment MAINTENANCE/SERVICE Lubrication Requirements Engine Service Electric Motor ServiceTroubleshooting TroubleshootingAccelerated Bearing Wear AND/OR Failure Operational PROBLEMS. Application All ModelsUneven MULTI-ACCESSORY Attachment Wear Accelerated V-BELT WearStorage StorageGeneral SpecificationsPage Explanation of Code in Remarks Column Qty Description Suggested Spare PartsUnits Gasoline Engine Units Electric Motor ModelOperator Handle ASSY. Electric Operator Handle ASSY. ElectricCABLE, Short HANDLE, Operator UniversalHP Motor only CABLE, LongOperator Handle ASSY. Gasoline Operator Handle ASSY. GasolineQTY Remarks CABLE, ThrottleKNOB, Throttle Control Electric Motor Assy Electric Motor AssyWASHER, Flat 5/16, Plated MOUNT, Electric MotorHP 50 HZ Motor SCREW, CAP 5/16-18 UNC X 1 PlatedGasoline Engine Assy Gasoline Engine AssyCAP, OIL Drain ENGINE, Honda 11 H.PMOUNT, Gasoline Engine CLUTCH, Pulley AssyWheel Assy Wheel AssyWASHER, Flat ¾ Plated ARM, SwingWheel AXLE, PlatedTransmission Assy Transmission AssyWASHER, Lock 5/16 Plated FRAME, MainCOVER, Transmission BEARING, FlangeHead Assy Head AssyDISC, Mounting DISC, MULTI- Accessory LHDISC, MULTI- Accessory RH BAR, MountingSafety and Dust Shield Assy Safety and Dust Shield AssySTRAP, Skirt Skirt AssemblySKIRT, Grinder WASHER, Fender 1/4 , PlatedScarifier Assy Scarifier AssyWEDGE, Plastic HousingBushing NUT, HEX 3/8 UNC, Nylock PlatedSCRAPE-R-TACH Assy INSERT, Tungsten Carbide HOLDER, InsertMOUNT, Rubber SpacerGrinding Block Assy General Purpose BlockRing Aggress GrindingDecals DecalsDECAL, Throttle Decals Part Name QTY RemarksDECAL, Warning DECAL, OperationPayment Terms Page HERE’S HOW to GET Help

DFG Series specifications

The Multiquip DFG Series stands out in the equipment industry due to its powerful performance and advanced technology tailored for a variety of applications. Engineered for durability and efficiency, the DFG Series is specifically designed to meet the demanding needs of contractors, making it an ideal choice for construction, demolition, and industrial projects.

One of the hallmark features of the DFG Series is its robust construction. Built with high-quality materials, these models are engineered to withstand harsh working conditions, providing longevity even in the toughest environments. The frames are designed for superior strength, while the engine components are optimized for reliability, ensuring that the equipment remains operational when it's needed the most.

In terms of performance, the DFG Series is equipped with state-of-the-art engines that deliver exceptional power while maintaining fuel efficiency. This balance reduces operating costs and minimizes environmental impact. Users can benefit from increased productivity as these machines are capable of handling heavy loads and challenging tasks with ease.

One of the standout technologies in the DFG Series is the advanced hydraulic system. This system allows for smooth and efficient operation, enabling the equipment to perform a wide range of tasks from lifting and moving materials to grading and leveling. The hydraulics are engineered for precise control, providing operators with enhanced maneuverability and flexibility on job sites.

Additionally, the DFG Series incorporates ergonomic design features aimed at enhancing user comfort and safety. The operator's cabin is spacious and well-appointed with intuitive controls, allowing for easy operation even during long hours of use. Safety is a priority, with features such as reinforced safety barriers, automatic shut-off systems, and well-placed visibility options to ensure that operators remain aware of their surroundings.

Maintenance is made simple with the DFG Series, which is designed with accessibility in mind. Key components are easily reachable, reducing downtime during servicing and ensuring that the equipment remains in peak operating condition.

Overall, the Multiquip DFG Series blends power, technology, and user-friendly design to provide a versatile solution for today's demanding construction and industrial applications. Whether tasked with heavy lifting, demolition, or ground preparation, the DFG Series remains a reliable choice that will exceed expectations.
Top Page Image Contents