Multiquip DFG Series manual Decals

Page 76
SP8-5070

DECALS.

DECALS.

WARNING

 

EYE AND EAR

 

PROTECTION

1

REQUIRED

 

SP8-5040

 

WARNING

1)BEFORE OPERATING THIS MACHINE,THOROUGHLY READ AND COMPREHEND THE CONTENTS OF THE APPLICABLE OPERATOR'S MANUAL.

2)BEFORE STARTING THE POWER SOURCE, RAISE THE BLADE TO FULLY TO CLEAR THE WORK SURFACE. VISUALLY INSPECT THE BLADE/ARBOR

SHAFT.

3)THIS MACHINE IS DESIGNED TO BE PULLED TOWARD THE OPERATOR DURING NORMAL OPERATION.

IMPROPER STARTING/OPERATING PROCEDURES CAN RESULT IN PRORERTY

DAMAGE AND/OR PERSONAL INJURY.

CS8-5030

2

3

5

WARNING

KEEP

GUARDS IN

PLACE

SP8-5050

4

7

6

WARNING

BEFORE HOISTING THIS MACHINE CONSULT THE APPLICABLE OPERATOR

MANUAL. IMPROPER HOISTING

PROCEDURES CAN RESULT IN

PROPERTY DAMAGE AND/OR PERSONALINJURY.

WARNING

KEEP CLEAR

OF ROTATING

PARTS

SP8-5030

STARTING INSTRUCTIONS

PROPANE CONVERTED UNITS ONLY

OPEN FUEL VALVE

4. 1 SEC

DO NOT USE CHOKE

5.

3.

WARNING

CLOSE FUEL VALVE. INSPECT

ALL FUEL HOSES AND FITTINGS

FOR LEAKS AND DAMAGE

AFTER STOPPING ENGINE.

CONSULT OPERATOR'S MANUAL

FOR SPECIFIC INFORMATION.

SG24-5060

WARNING

This machine can be operated from the following power sources:

115 VOLT, 20 AMPERE, 60 HZ, AC ELECTRIC

OR

230 VOLT, 10 AMPERE, 60 HZ, AC ELECTRIC

UTILIZE 8-3 AWG MINIMUM, COPPER STRANDED EXTENSION CORDS.

Improper extension cords will cause the moto to over heat and deploy the internal thermo protection device. the device is intended to stop the motor before the heat can cause permanent damage. It must be manually activated to restart the motor after a sufficient time for cooling is allowed.

OPERATE THE MOTOR FROM THE PROPER POWER SOURCE

A voltage selector switch is provided on the electric motor. Retain the switch in position with a long shank type lock. Determine the voltage and amperage capacity of the power source before operating the motor. Do not operate the motor on an improperly selected power source. Do not deploy the voltage selector switch while the motor is operating.

Improper voltage and amperage capacity can result in motor damage and/or personal injury.

7

8

DFG SERIES SURFACE GRINDERS

OPERATION AND PARTS MANUAL REV #3 (07/13/06)

PAGE 76

 

 

 

Page 75 Page 77
Image 76
Page 75 Page 77
Contents Electric Gasoline Page Table of Contents Table of Contents Page Parts Ordering Procedures Page Page Operator Instructional Data Sheet Safety Precautions Safety Precautions Operation MAINTENANCE, Repair and Storage Surface GrinderSafety Precautions Removing the Surface Grinder from the Pallet AssemblyApplication All Models Installing the SG24-1000 Safety and Dust Shield Assembly KIT Before Starting the Engine Filling the Engine Crankcase with OILApplications DFG/G Surface Grinder Filling the DFG/G Series Engine Fuel TankMULTI-ACCESSORY Attachments and Applications OperationTheory of Operation Grinding StonesTungsten Carbide Grinding Block Scarifier BlocksStar Flail Beam FlailPentagonal Flail Spacer WasherWire brushes Scarifier Block BushingFloor Brushes SCRAPE-R-TACH Industrial Floor Coatings Removal SystemAssembly INSTRUCTIONS/OPERATIONS Follow all safety precautions for the safety solvent Diamond Segment Block Assembly INSTRUCTIONS/OPERATIONS From the Counterrotating Discs Assembly INSTRUCTIONS/OPERATIONS Adjusting the Operator Handle HEIGHT. Application All Models Assembly INSTRUCTIONS/OPERATIONS Assembly INSTRUCTIONS/OPERATIONS Operating the Surface Grinder on the Jobsite Result in Property Damage AND/OR Personal Injury FiureAssembly INSTRUCTIONS/OPERATIONS Application All Models Early Age Grinding Stopping the DFG/G Series Gasoline Powered Surface GrinderDefinitions of floor flatness and levelness How to Define Surface Regularity Defined Versus Random Traffic PatternsTR 34 tolerances for defined traffic floors Assembly INSTRUCTIONS/OPERATIONS Maintenance/Service MAINTENANCE/SERVICEPreventative Maintenance Check LIST. Application All Models Observe all applicable safety precautions for the solvent MAINTENANCE/SERVICE Checking V-BELT Tension and Alignment MAINTENANCE/SERVICE Lubrication Requirements Electric Motor Service Engine ServiceTroubleshooting TroubleshootingOperational PROBLEMS. Application All Models Uneven MULTI-ACCESSORY Attachment WearAccelerated V-BELT Wear Accelerated Bearing Wear AND/OR FailureStorage StorageSpecifications GeneralPage Explanation of Code in Remarks Column Suggested Spare Parts Units Gasoline EngineUnits Electric Motor Model Qty DescriptionOperator Handle ASSY. Electric Operator Handle ASSY. ElectricHANDLE, Operator Universal HP Motor onlyCABLE, Long CABLE, ShortOperator Handle ASSY. Gasoline Operator Handle ASSY. GasolineKNOB, Throttle Control CABLE, ThrottleQTY Remarks Electric Motor Assy Electric Motor AssyMOUNT, Electric Motor HP 50 HZ MotorSCREW, CAP 5/16-18 UNC X 1 Plated WASHER, Flat 5/16, PlatedGasoline Engine Assy Gasoline Engine AssyENGINE, Honda 11 H.P MOUNT, Gasoline EngineCLUTCH, Pulley Assy CAP, OIL DrainWheel Assy Wheel AssyARM, Swing WheelAXLE, Plated WASHER, Flat ¾ PlatedTransmission Assy Transmission AssyFRAME, Main COVER, TransmissionBEARING, Flange WASHER, Lock 5/16 PlatedHead Assy Head AssyDISC, MULTI- Accessory LH DISC, MULTI- Accessory RHBAR, Mounting DISC, MountingSafety and Dust Shield Assy Safety and Dust Shield AssySkirt Assembly SKIRT, GrinderWASHER, Fender 1/4 , Plated STRAP, SkirtScarifier Assy Scarifier AssyHousing BushingNUT, HEX 3/8 UNC, Nylock Plated WEDGE, PlasticSCRAPE-R-TACH Assy HOLDER, Insert MOUNT, RubberSpacer INSERT, Tungsten CarbideGrinding Block Assy Block RingAggress Grinding General PurposeDecals DecalsDecals Part Name QTY Remarks DECAL, WarningDECAL, Operation DECAL, ThrottlePayment Terms Page HERE’S HOW to GET Help

DFG Series specifications

The Multiquip DFG Series stands out in the equipment industry due to its powerful performance and advanced technology tailored for a variety of applications. Engineered for durability and efficiency, the DFG Series is specifically designed to meet the demanding needs of contractors, making it an ideal choice for construction, demolition, and industrial projects.

One of the hallmark features of the DFG Series is its robust construction. Built with high-quality materials, these models are engineered to withstand harsh working conditions, providing longevity even in the toughest environments. The frames are designed for superior strength, while the engine components are optimized for reliability, ensuring that the equipment remains operational when it's needed the most.

In terms of performance, the DFG Series is equipped with state-of-the-art engines that deliver exceptional power while maintaining fuel efficiency. This balance reduces operating costs and minimizes environmental impact. Users can benefit from increased productivity as these machines are capable of handling heavy loads and challenging tasks with ease.

One of the standout technologies in the DFG Series is the advanced hydraulic system. This system allows for smooth and efficient operation, enabling the equipment to perform a wide range of tasks from lifting and moving materials to grading and leveling. The hydraulics are engineered for precise control, providing operators with enhanced maneuverability and flexibility on job sites.

Additionally, the DFG Series incorporates ergonomic design features aimed at enhancing user comfort and safety. The operator's cabin is spacious and well-appointed with intuitive controls, allowing for easy operation even during long hours of use. Safety is a priority, with features such as reinforced safety barriers, automatic shut-off systems, and well-placed visibility options to ensure that operators remain aware of their surroundings.

Maintenance is made simple with the DFG Series, which is designed with accessibility in mind. Key components are easily reachable, reducing downtime during servicing and ensuring that the equipment remains in peak operating condition.

Overall, the Multiquip DFG Series blends power, technology, and user-friendly design to provide a versatile solution for today's demanding construction and industrial applications. Whether tasked with heavy lifting, demolition, or ground preparation, the DFG Series remains a reliable choice that will exceed expectations.
Top Page Image Contents