Multiquip DFG Series manual Assembly, Removing the Surface Grinder from the Pallet

Page 15

ASSEMBLY INSTRUCTIONS/OPERATIONS

Assembly

The DFG Series SURFACE GRINDER is shipped from the factory secured on a specially designed wooden pallet and protected from external damage by a corrugated carton or wood crate. If shipped with

acorrugated carton, the SURFACE GRINDER can be secured to the pallet by wood laths nailed to the pallet body. Remove the carton or crate immediately upon receipt using suitable tools to remove the nails.

REMOVING THE SURFACE GRINDER FROM THE PALLET.

Application: All Models

Tools Required:

1 each, pliers.

1each, claw hammer or a hammer and an appropriate pry bar.

The SURFACE GRINDER is secured to the pallet with steel banding. Using the pliers, cut and remove the banding. The SURFACE GRINDER can then be removed from the pallet.

DANGER

WEAR SAFETY GLASSES AND OTHER APPROPRIATE SAFETY APPAREL WHEN CUTTING THE STEEL BANDING AND/OR

REMOVING THE CORRUGATED/WOOD SHIPPING CRATE.

Visually inspect the shipment for freight damage and/or missing parts. If shipping damage is evident, contact the delivering carrier immediately to arrange for an inspection of the damage by their claims representative. Federal law requires that a claim be filed within a specific time period. If missing parts are detected, notify your dealer who will assist you in obtaining them.

The SURFACE GRINDER is shipped from the factory completely assembled. If ordered with the SURFACE GRINDER, multi-accessory attachments are normally shipped separately to minimize the potential for loss during shipment.

Check all fasteners for proper security. Consult a fastener torque chart for the proper torque value if any fastener is found to require retorquing.

After April 1, 1996 all SURFACE GRINDERS are shipped from the factory with the SG24-1000 Safety

and Dust Shield Assembly Kit included as a standard accessory. The kit is included in a separate package and is not normally installed by factory personnel. The owner and/ or operator (has) have the option to install the skirt assembly for any specific job application. The DFG-1000 Safety and Dust Shield is designed to perform the following job functions:

1)To contain loose materials within the platform area of the SURFACE GRINDER as a direct result of a specific grinding process. This includes materials removed from the surface as well as any slurry mixture utilized to help maximize material removal efficiencies.

2)To provide a method for a vacuum system to help remove airborne dust related materials from within the skirt assembly. Dust related materials are usually created as a result of the grinding process. A specific job application may require the reduction and/or minimization of airborne dust related materials from the atmosphere while the SURFACE GRINDER is being operated. The kit includes a hose and necessary hardware to connect the skirt assembly to the 3 inch diameter vacuum attachment fitting located at the rear of the machine. Use of the kit along with a suitable vacuum system will not completely remove all airborne and loose materials directly from the work surface.

DANGER

THE USE OF THE SG24-1000 SAFETY AND DUST SHIELD ASSEMBLY KIT ALONG WITH A SUITABLE VACUUM SYSTEM TO REMOVE

HAZARDOUS CLASSIFIED, AIRBORNE MATERIALS FROM THE WORK SURFACE WILL NOT ELIMINATE THE REQUIREMENT FOR PROPER SAFETY RELATED EQUIPMENT, OPERATING PLAN AND/OR PROCEDURES.

DANGER

USE OF THE SG24-1000 SAFETY AND DUST SHIELD ASSEMBLY KIT ALONG WITH A SUITABLE VACUUM SYSTEM WILL NOT

COMPLETELY REMOVE ALL LOOSE MATERIALS FROM THE WORK SURFACE. HAZARDOUS CLASSIFIED, LOOSE MATERIALS MUST BE REMOVED FROM THE WORK

SURFACE BY PROCESSES AND/OR PROCEDURES MEETING THE APPLICABLE OSHA AND/OR EPA REQUIREMENTS.

DFG-SERIES SURFACE GRINDERS

OPERATION AND PARTS MANUAL REV #4 (05/28/09)

PAGE 15

 

 

 

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Electric Gasoline Page Table of Contents Table of Contents Page Parts Ordering Procedures Page Page Operator Instructional Data Sheet Safety Precautions Safety Precautions Operation Surface Grinder MAINTENANCE, Repair and StorageSafety Precautions Assembly Removing the Surface Grinder from the PalletApplication All Models Installing the SG24-1000 Safety and Dust Shield Assembly KIT Filling the DFG/G Series Engine Fuel Tank Before Starting the EngineFilling the Engine Crankcase with OIL Applications DFG/G Surface GrinderGrinding Stones MULTI-ACCESSORY Attachments and ApplicationsOperation Theory of OperationScarifier Blocks Tungsten Carbide Grinding BlockBeam Flail Star FlailSpacer Washer Pentagonal FlailScarifier Block Bushing Wire brushesSCRAPE-R-TACH Industrial Floor Coatings Removal System Floor BrushesAssembly INSTRUCTIONS/OPERATIONS Follow all safety precautions for the safety solvent Diamond Segment Block Assembly INSTRUCTIONS/OPERATIONS From the Counterrotating Discs Assembly INSTRUCTIONS/OPERATIONS Adjusting the Operator Handle HEIGHT. Application All Models Assembly INSTRUCTIONS/OPERATIONS Assembly INSTRUCTIONS/OPERATIONS Operating the Surface Grinder on the Jobsite Fiure Result in Property Damage AND/OR Personal InjuryAssembly INSTRUCTIONS/OPERATIONS Stopping the DFG/G Series Gasoline Powered Surface Grinder Application All Models Early Age GrindingDefinitions of floor flatness and levelness Defined Versus Random Traffic Patterns How to Define Surface RegularityTR 34 tolerances for defined traffic floors Assembly INSTRUCTIONS/OPERATIONS MAINTENANCE/SERVICE Maintenance/ServicePreventative Maintenance Check LIST. Application All Models Observe all applicable safety precautions for the solvent MAINTENANCE/SERVICE Checking V-BELT Tension and Alignment MAINTENANCE/SERVICE Lubrication Requirements Engine Service Electric Motor ServiceTroubleshooting TroubleshootingAccelerated Bearing Wear AND/OR Failure Operational PROBLEMS. Application All ModelsUneven MULTI-ACCESSORY Attachment Wear Accelerated V-BELT WearStorage StorageGeneral SpecificationsPage Explanation of Code in Remarks Column Qty Description Suggested Spare PartsUnits Gasoline Engine Units Electric Motor ModelOperator Handle ASSY. Electric Operator Handle ASSY. ElectricCABLE, Short HANDLE, Operator UniversalHP Motor only CABLE, LongOperator Handle ASSY. Gasoline Operator Handle ASSY. GasolineCABLE, Throttle KNOB, Throttle ControlQTY Remarks Electric Motor Assy Electric Motor AssyWASHER, Flat 5/16, Plated MOUNT, Electric MotorHP 50 HZ Motor SCREW, CAP 5/16-18 UNC X 1 PlatedGasoline Engine Assy Gasoline Engine AssyCAP, OIL Drain ENGINE, Honda 11 H.PMOUNT, Gasoline Engine CLUTCH, Pulley AssyWheel Assy Wheel AssyWASHER, Flat ¾ Plated ARM, SwingWheel AXLE, PlatedTransmission Assy Transmission AssyWASHER, Lock 5/16 Plated FRAME, MainCOVER, Transmission BEARING, FlangeHead Assy Head AssyDISC, Mounting DISC, MULTI- Accessory LHDISC, MULTI- Accessory RH BAR, MountingSafety and Dust Shield Assy Safety and Dust Shield AssySTRAP, Skirt Skirt AssemblySKIRT, Grinder WASHER, Fender 1/4 , PlatedScarifier Assy Scarifier AssyWEDGE, Plastic HousingBushing NUT, HEX 3/8 UNC, Nylock PlatedSCRAPE-R-TACH Assy INSERT, Tungsten Carbide HOLDER, InsertMOUNT, Rubber SpacerGrinding Block Assy General Purpose BlockRing Aggress GrindingDecals DecalsDECAL, Throttle Decals Part Name QTY RemarksDECAL, Warning DECAL, OperationPayment Terms Page HERE’S HOW to GET Help

DFG Series specifications

The Multiquip DFG Series stands out in the equipment industry due to its powerful performance and advanced technology tailored for a variety of applications. Engineered for durability and efficiency, the DFG Series is specifically designed to meet the demanding needs of contractors, making it an ideal choice for construction, demolition, and industrial projects.

One of the hallmark features of the DFG Series is its robust construction. Built with high-quality materials, these models are engineered to withstand harsh working conditions, providing longevity even in the toughest environments. The frames are designed for superior strength, while the engine components are optimized for reliability, ensuring that the equipment remains operational when it's needed the most.

In terms of performance, the DFG Series is equipped with state-of-the-art engines that deliver exceptional power while maintaining fuel efficiency. This balance reduces operating costs and minimizes environmental impact. Users can benefit from increased productivity as these machines are capable of handling heavy loads and challenging tasks with ease.

One of the standout technologies in the DFG Series is the advanced hydraulic system. This system allows for smooth and efficient operation, enabling the equipment to perform a wide range of tasks from lifting and moving materials to grading and leveling. The hydraulics are engineered for precise control, providing operators with enhanced maneuverability and flexibility on job sites.

Additionally, the DFG Series incorporates ergonomic design features aimed at enhancing user comfort and safety. The operator's cabin is spacious and well-appointed with intuitive controls, allowing for easy operation even during long hours of use. Safety is a priority, with features such as reinforced safety barriers, automatic shut-off systems, and well-placed visibility options to ensure that operators remain aware of their surroundings.

Maintenance is made simple with the DFG Series, which is designed with accessibility in mind. Key components are easily reachable, reducing downtime during servicing and ensuring that the equipment remains in peak operating condition.

Overall, the Multiquip DFG Series blends power, technology, and user-friendly design to provide a versatile solution for today's demanding construction and industrial applications. Whether tasked with heavy lifting, demolition, or ground preparation, the DFG Series remains a reliable choice that will exceed expectations.
Top Page Image Contents