Grizzly G0622 Installing V-Belt, To install the pulleys, To install the V-belt around the pulleys

To install the pulleys:

1.Open pulley cover.

2.Insert the woodruff keys into the slots on the shafts.

3.Slide the large diameter motor pulley onto the motor shaft, closest (Figure 11).

Motor Pulley with Key Slot

Figure 11. Installing motor pulley.

3. Install the worm gear pulley with the small diameter wheel closest to the gear box.

4. Use a straightedge to check the alignment of the pulley wheels as shown in Figure 12.

Installing V-Belt

To install the V-belt around the pulleys:

1.KEEP BANDSAW UNPLUGGED!

2.Unthread the motor lock bolt to allow the motor to pivot up.

3.Open the pulley cover door and pivot the motor up to allow the V-belt to slide into the pulley grooves as shown in Figure 13.

Motor Lock

Bolt

Figure 13. V-belt installation.

4.Release the motor, letting the weight tension the V-belt, and thread the motor lock bolt against the side of the bandsaw.

Figure 12. Checking pulley alignment.

5.When the pulley wheels are aligned, tighten the setscrews on both pulleys.

-16- G0622 4" X 6" Metal Cutting Bandsaw