Grizzly G0613, G0614 owner manual Control Panel

Control Panel

A

B

D C

Figure 2. G0613 control panel.

A.ON/OFF Push Button Switch: When the cover is open, it allows access to the normal- operation ON/OFF pushbutton switch that is used to start and stop the bandsaw.

B.EMERGENCY Stop and Anti-Start Lockout Cover: When the cover is closed but not latched shut, it serves as an easy-to-find EMERGENCY STOP button with anti-start lockout. If pushed in an emergency situation, the cover pushes the OFF button and then latches shut, preventing accidental machine startup.

Note: Both bandsaws also have an auto- matic shut-off (limit switch) that turns the saw OFF at the completion of the cutting arc.

C.Circuit Breaker: Kills power in the event of high current draw or motor overload.

D.Cutting Fluid Pump Switch: Turns the cut- ting fluid pump ON.

E F

G

H I

Figure 3. G0614 control panel.

E.ON Button: Turns the motor ON and starts the bandsaw.

F.OFF Button: Turns the motor OFF and stops the bandsaw.

G.Cutting Speed Switch: Changes the motor speed between 1725 and 3450 RPM, giving two cutting speeds of 170 and 341 FPM.

H.Cutting Fluid Pump Switch: Turns the cut- ting fluid pump ON.

I.EMERGENCY STOP/OFF Button: Kills power to the system and turns the motor OFF. Twist the button until it pops out to re- energize the system.

-8- G0613/14 Swivel Mast Metal Cutting Bandsaw