Grizzly G0613, G0614 Operations, Operation Safety Cutting Angle, To set the angle of cut

SECTION 4: OPERATIONS

Operation Safety Cutting Angle

Damage to your eyes, lungs, and ears could result from using this machine without proper protective gear. Always wear safety glasses, a respirator, and hearing protection when operating this machine.

Loose hair and cloth-

ing could get caught in

machinery and cause seri-

ous personal injury. Keep

loose clothing and long

hair away from moving machinery.

NOTICE

This bandsaw is for trained operators only. WE STRONGLY RECOMMEND that you read books, trade magazines, and get formal training before beginning any projects. Regardless of the content in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training.

Your bandsaw has a locking turret with a range of 0° to 60° degrees.

To set the angle of cut:

1.Raise the bow to the highest position and lock in place (Figure 12).

Feed ON/OFF

Figure 12. Feed ON/OFF Valve.

2.Move the swivel lock lever (Figure 13), to the left and rotate the headstock until the scale indicates the angle that you need.

Unlock Lock

Figure 13. Swivel lock lever.

3. Move the swivel lock lever to the right to lock the headstock in place. The cutting angle is now set.

-20- G0613/14 Swivel Mast Metal Cutting Bandsaw