Grizzly G0495X owner manual Inventory, Box 1 Qty

Inventory

The following is a description of the main compo- nents shipped with your machine. Lay the compo- nents out to inventory them.

Note: If you can't find an item on this list, check the mounting location on the machine or examine the packaging materials carefully. Occasionally we pre-install certain components for shipping purposes.

Box 1: (Figure 5 & 6)		Qty
A.	Jointer Assembly (not shown)	1
B.	Hex Wrench 3mm	1
C.	Hex Wrench 4mm	1
D..	Hex Wrench 5mm	1
E..	Hex Wrench 6mm	1
F.	Hex Wrench 8mm	1
G.	Open End Wrench 12/14mm	1
H.	Open End Wrench 14/17mm	1
I.	Phillips Head Screwdriver	1
J..	Push Blocks	2
K.	T-Handle Driver	1
L..	Torx Bit T-25	1
M..	Inserts 15 x 15 x 2.5	5
N..	Flat Head Torx Screws #10-32	10
O..	AAA Batteries (not shown)	2

-12-

B
C	G
D
E	H	J
F
	I

Figure 5. Tools inventory.

K

L

M

N

Figure 6. Spiral cutterhead hardware.

If any nonproprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.

SUFFOCATION HAZARD!

Immediately discard all plas- tic bags and packing materi- als to eliminate choking/suf- focation hazards for children and animals.

G0495X 8" Jointer w/Digital Readout