Grizzly G0495X owner manual Edge Jointing, To edge joint on the jointer

Page 28

Edge Jointing

The purpose of edge jointing is to produce a fin- ished, flat-edged surface (see Figures 30 & 31) that is suitable for joinery or finishing. It is also a necessary step when squaring rough or warped stock.

NOTICE

If you are not experienced with a jointer, set the depth of cut to 0", and practice feeding the workpiece across the tables as described below. This procedure will better prepare you for the actual operation.

Figure 30. Typical edge jointing operation.

Figure 31. Illustration of edge jointing results.

To edge joint on the jointer:

1.Read and understand SECTION 1: SAFETY, beginning on Page 7.

2.Make sure your stock has been inspected for dangerous conditions as described in the

Stock Inspection & Requirements instruc- tions, beginning on Page 23.

3.Set the cutting depth for your operation. (We suggest between 1⁄16" and 1⁄8" for edge jointing, using a more shallow depth for hard wood species or for wide stock.)

4.Make sure the fence is set to 90˚.

5.If your workpiece is cupped (warped), place it so the concave edge is face down on the surface of the infeed table.

6.Start the jointer.

7.With a push block in your leading hand, press the workpiece against the table and fence with firm pressure. Use your trailing hand to guide the workpiece through the cut, and feed the workpiece over the cutterhead.

Note: If your leading hand gets within 4" of the cutterhead, lift it up and over the cutterhead, and place it on the portion of the workpiece that is over the outfeed table. Now, focus your pressure on the outfeed end of the workpiece while feeding, and repeat the same action with your trailing hand when it gets within 4" of the cutterhead. To keep your hands safe, DO NOT let them get closer than 4" from the cutterhead when it is mov- ing!

8.Repeat Step 7 until the entire edge is flat.

-26-

G0495X 8" Jointer w/Digital Readout

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Model G0495X Ss ,EAD from Leadbased PAINTS Table of Contents Foreword Functional Overview IntroductionContact Info Machine Data Sheet Cutterhead Info Identification Control Panel & Digital Sensor Features  !,7!93 53% !.3 !002/6%$$ 3!&%49 ,!33%33 7%. /0%2!4  !,7!93 53%3 %!2.2 02/4%#4/ %. /0%2!4.! -!#.%29 53%3!!2/5.$%$ %84%.3/..#/2$ 2!4%$4&/2/4%-!#.%!-0%2!%2  53%3 2%#/--%.$%$- !##%33/2%3 -!.9 -!#.%3 #!. %*%#4 7/2+0%#%3 4/7!2$ /0%2!4/2  !,7!93 ,/#+ -/,% !3%3 & 53%$ % %&/2% /0%2!4. -!#.%29#Additional Safety Instructions for Jointers Circuit Requirements 220V OperationSetup Setup SafetyItems Needed for Setup UnpackingInventory Box 1 QtyClean Up Placement LocationSite Considerations Floor LoadMoving & Placing Jointer Mounting to Shop FloorBolting to Concrete Floors To lift the jointerTo connect the machine to a dust collector Dust Collection Setting OutfeedTo set the outfeed table height Digital Readout Batteries To install the AAA batteries in the control panelTest Run Recommended Adjustments Factory adjustments that should be verifiedOperation Safety OperationsPage Digital Sensor Readout Digital Sensor-278 Digital Readout To use the digital readoutStock Inspection Requirements #/22%#4Squaring Stock Surface Planing To surface plane on the jointerEdge Jointing To edge joint on the jointerBevel Cutting To bevel cut on the jointerRabbet Cutting To rabbet cut on the jointerAccessories H8029-5 Piece Safety KitHalf-mask respirator with disposable Cartridge filters T20448T20452 T20501 T20456 H0736Maintenance CleaningSchedule Unpainted Cast IronTroubleshooting ServiceMotor & Electrical Possible Cause Possible Solution CuttingChecking Outfeed Table Checking/Adjusting Table ParallelismTools Needed Qty Adjusting Table Parallelism Checking Infeed TableTo adjust the table parallelism Front eccentric bushingsReplacing Carbide Inserts To rotate or change a carbide insertSetting Infeed Table Setting Outfeed Table Height onCalibrating Infeed To calibrate the depth scaleTo adjust the cutterhead guard Calibrating Digital Sensor & ReadoutCutterhead Guard To calibrate the sensor and displaySetting Fence Stops To set the 45˚ inward fence stopTo set the 90˚ fence stop To set the 45˚ outward fence stopTo adjust/replace the V-belt BeltTo align the pulleys Pulley AlignmentSteps Control panel wiring Electrical ComponentsWiring Diagram See FigureFence Parts Breakdown & List DescriptionBase Parts Breakdown & List +  .+ -&Table Parts Breakdown & List +- +& ++ +* +, +Stand Parts Breakdown & List Stand Parts List Label Placement22!.49 #!2$ 99.$5342!, .# 0//88 %,,.!- 7!  WARRANTY7!22!.499!AND.$$2%452RETURNS.3 #ALL 4ODAYD&ORO! &2%%

G0495X specifications

The Grizzly G0495X is a versatile and powerful tool designed for woodworking enthusiasts and professionals alike. This hybrid table saw combines cutting-edge technology with traditional craftsmanship, ensuring precision and efficiency in every project.

At the heart of the G0495X is its robust 3 HP motor, which delivers exceptional power to handle even the toughest hardwoods with ease. This heavy-duty drive system ensures smooth and reliable performance, reducing the risk of motor burnout during extended use. The saw's belt drive system further enhances its capability, providing a high degree of torque for challenging cutting tasks.

One of the standout features of the G0495X is its large cast iron table. Measuring a generous 30” x 42”, it provides ample workspace for handling larger materials while ensuring stability and accuracy in cuts. The precision-ground surface of the table reduces friction, allowing for smoother movement of wood across the surface. Additionally, the table features an integrated T-style miter gauge slot, offering the user versatility for various cutting angles.

In terms of safety, the G0495X is equipped with several important features. The riving knife and blade guard help to prevent kickbacks, making it safer to use, particularly for novices. The easy-to-use height and bevel adjustment mechanisms allow users to make quick changes to the blade settings for different cut types.

The saw also incorporates advanced dust collection capabilities. With a 4” dust port, it connects to most standard dust collection systems, significantly reducing the mess and maintaining a clean workspace. This feature not only keeps the area tidy but also enhances the user’s visibility while working.

Another notable characteristic of the Grizzly G0495X is its versatility. This table saw can handle various cutting tasks, from rip cuts to crosscuts, making it suitable for a range of woodworking projects, including furniture making, cabinetry, and more. The built-in extension table and side wings also expand the cutting capacity for larger projects.

Overall, the Grizzly G0495X stands out as a reliable and powerful table saw equipped with premium features that cater to both amateur and professional woodworkers. Its combination of performance, safety, and advanced technologies makes it an excellent investment for anyone serious about woodworking.
Top Page Image Contents