Woodstock W1706 owner manual Electrical Safety Instructions, Wiring Diagram Color KEY

Page 52

Model W1706 (Mfg. Since 8/10)

Electrical Safety Instructions

These pages are current at the time of printing. However, in the spirit of improvement, we may make changes to the electrical systems of future machines. Study this diagram carefully. If you notice differences between your machine and these wiring diagrams, call Woodstock International Technical Support at (360) 734-3482.

1.SHOCK HAZARD. Working on wiring that is connected to a power source is extremely dangerous. Touching electrified parts will result in personal injury including but not limited to severe burns, electrocution, or death. Disconnect the power from the machine before servicing electrical components!

2.QUALIFIED ELECTRICIAN. Due to the inherent hazards of electricity, only a qualified electrician should perform wiring tasks on this machine. If you are not a qualified electrician, get help from one before attempting any kind of wiring job.

3.WIRE CONNECTIONS. All connections must be tight to prevent wires from loosening during machine operation. Double-check all wires disconnected or connected during any wiring task to ensure tight connections.

4.WIRE/COMPONENT DAMAGE. Damaged wires or components increase the risk of serious personal injury, fire, or machine damage. If you notice that any wires or components are damaged while performing a wiring task, replace those wires or components before completing the task.

5.MOTOR WIRING. The motor wiring shown in these diagrams is current at the time of printing, but it may not match your machine. Always use the wiring diagram inside the motor junction box.

6.MODIFICATIONS. Using aftermarket parts or modifying the wiring beyond what is shown in the diagram may lead to unpredictable results, including serious injury or fire.

7.CAPACITORS/INVERTERS. Some capacitors and power inverters store an electrical charge for up to five minutes after being disconnected from the power source. To avoid being shocked, wait at least this long before working on these components.

8.ELECTRICAL REQUIREMENTS. You MUST follow the electrical requirements at the beginning of this manual when connecting your machine to a power source.

9.EXPERIENCING DIFFICULTIES. If you are experiencing difficulties understanding the information included in this section, contact our Technical Support at (360) 734- 3482.

SERVICE

 

 

WIRING DIAGRAM COLOR KEY

 

The photos and diagrams

BLACK

BLUE

YELLOW

LIGHT

included in this section are

WHITE

BROWN

YELLOW

BLUE

BLUE

best viewed in color. You

 

 

GREEN

GREEN

GRAY

PURPLE

WHITE

can view these pages in

TUR-

 

 

 

color at www.shopfox.biz.

RED

ORANGE

PINK

QUOISE

-50-

Page 51 Page 53
Image 52
Page 51 Page 53
Contents OWNERS MANUAL Page Contents Introduction Woodstock Technical SupportControls and Features Blade Tracking Knob Adjusts and locks the blade trackingBlade Guide Lock Knob Locks the upper blade guides in place Blade Tension Knob Tensions the blade in gradual incrementsSafety Standard Machinery Safety InstructionsSafety Additional Safety for Bandsaws Power Supply Circuit Requirements for 110V PrewiredCircuit Requirements Full-Load Current RatingFor 110V Connection Prewired For 220V Connection Must Be RewiredGrounding Requirements Extension CordsSetup UnpackingInventory Inventory Figures QtyMachine Placement Cleaning Machine Assembly Setup ProceduresTo assemble the bandsaw, do these steps Installing the table onto Trunnion base Rear Fence Rail Dust Collection Recommended CFM at Dust PortBlade Tracking To center track the blade, do these stepsPower Connection Refer to Adjusting Blade Guide Bearings onTest Run Additional AdjustmentsTo test run the machine, do these steps Tensioning Blade Adjusting Blade Guide Bearings on Page 24 forTo correctly tension the bandsaw blade, do these steps To adjust the positive stop, do these steps Adjusting Positive StopTools Needed Qty Aligning Table Taking measurements for aligning the table with the bladeAligning Miter Gauge Body To align the miter gauge body, do these stepsAdjusting Fence To align the fence with the miter slot, do these stepsAdjusting Blade Support Bearings To adjust the support bearings, do these stepsSupport bearing positioned Adjusting Blade Guide Bearings To adjust the blade guide bearings, do these stepsRotating the blade guide Bearings toward the blade Operations GeneralDisabling & Locking Switch Operation OverviewBasic Controls Cutting Overview Workpiece InspectionBasic Cutting Tips Cutting workpieces with minor WarpingAdjusting Guide Post To adjust the guide post, do these stepsTable Tilt To tilt the table, do these stepsRipping To make a rip cut, do these stepsCrosscutting To make a 90˚ crosscut, do these stepsResawing To resaw a workpiece, do these stepsCutting Curves Stacked Cuts⁄16 To complete a stacked cut, do these stepsBlade Speed To change the blade speed, do these stepsBlade Length Blade InformationBlade Width Tooth Style Tooth PitchBlade Care Blade BreakageBlade Changes To change the blade, do these stepsAccessories Bandsaw AccessoriesLubrication Cleaning MaintenanceProtecting Table Redressing Rubber Tires ServiceTo redress the rubber tires, do these steps Belt Service Adjusting Belt TensionChecking Belt To tension the belt, do these stepsReplacing Belt To replace the belt, do these stepsItems Needed Qty Shimming TableTo shim the table, do these steps Correcting Blade Lead Blade LeadTo skew the fence, do these steps Tool Needed Qty Aligning WheelsSkew the table, do these steps Coplanar conditions Measuring the distance Wheel is out of adjustment Shimming a WheelElectrical Safety Instructions Wiring Diagram Color KEYW1706 Wiring Diagram Troubleshooting Problem Possible CauseParts Cabinet StandCabinet Stand Parts List Body Parts ListBody Wheel Tire Fence & Miter Gauge Fence & Miter Gauge Parts List Model W1706 Mfg. Since 8/10 Woodstock international inc. p.o. box Bellingham, Wa Warranty High Quality Machines and Tools

W1706 specifications

The Woodstock W1706 is a versatile and robust woodworking machine designed to cater to both professional carpenters and woodworking enthusiasts. Renowned for its exceptional build quality and innovative features, the W1706 stands out in the crowded market of woodshop equipment.

At its core, the W1706 is a heavy-duty table saw, offering a powerful 1.5 HP motor that delivers reliable performance even under demanding load conditions. This motor is designed to provide efficient cutting power while maintaining low noise levels, ensuring a pleasant working environment. The saw can handle a variety of materials ranging from softwoods to hardwoods, making it suitable for an extensive range of applications.

One of the key characteristics of the W1706 is its precision-engineered cast iron table. This large, flat surface offers excellent stability and minimizes vibrations during operation, allowing for accurate cuts. The integrated T-slot miter gauge adds to the versatility, enabling users to make precise crosscuts and angled cuts with ease. Additionally, the table is equipped with an extendable infeed and outfeed support, facilitating the handling of larger workpieces.

Safety features are paramount in the design of the W1706. It includes a riving knife that helps prevent kickback, a crucial aspect of safe woodworking practice. The blade guard provides further protection, allowing users to operate the machine with a peace of mind. Moreover, the push stick and emergency stop button enhance safety, ensuring that operators can quickly disengage the machine if necessary.

The W1706 is also designed with user convenience in mind. Its easy-to-read scaled fence provides quick adjustments for different cutting widths, promoting efficiency without compromising accuracy. The saw is fitted with a dust collection port that connects to a vacuum system, significantly reducing mess and ensuring a clean workspace.

In addition to its impressive features, the Woodstock W1706 is built for longevity. Constructed with durable materials, it is designed to withstand the rigors of daily use. With proper maintenance, users can expect this machine to serve them well for many years.

In summary, the Woodstock W1706 is a top-of-the-line tabletop saw that excels in performance, safety, and user convenience. Its powerful motor, precision engineering, safety features, and durable construction make it an ideal choice for anyone looking to elevate their woodworking projects to the next level. Whether for professional use or serious hobbyists, the W1706 is a reliable tool that truly embodies quality craftsmanship.
Top Page Image Contents