Graco 238515, 238512 important safety instructions Instructions -- Parts List, Model 238511 shown

Page 1

Instructions -- Parts List

PRESET

PM5t Electronic

Metered Dispense Valves 309377D

For pre--set metered dispense of oils and antifreeze.

1000 psi (7 MPa, 69 bar) Maximum Working Pressure

5 gpm (18.9 lpm) Maximum Flow Rate

Model 238511 75_ bend 3/8-in. rigid tube

Model 238512 3/8-in. coupled flexible hose

	Model 238515 90_ offset		TI0327
	Model 238515 90_ offset
	Patent Nos.
	4,883,199	DE3834454C2
	D382,500	1025804	Model 238511 shown
	6,357,300	ZL97102971.7	Model 238511 shown
	6,357,300	ZL97102971.7
	6,047,906	187760
	77664	13742

Important Safety instructions

Read all warnings and instructions in this manual.

Save these instructions.

CAUTION

DThis dispense valve is designed to dispense petroleum-based lubricants and antifreeze only. Do not dispense windshield washer solvent with this dispense valve.

DThis dispense valve is designed for indoor use only.

DThis dispense valve is not designed for in-line installation. Do not install with a shutoff valve on the outlet side of the meter. Such installation

could result in damage to the meter housing cover.

GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440- 1441

Copyright 2001, Graco Inc. is registered to I.S. EN ISO 9001

Image 1

Contents Important Safety instructions Instructions -- Parts ListModel 238511 shown Symbols Table of ContentsFire and Explosion Hazard Typical Installations InstallationMounting Bracket Mounting bracketInstallation Procedure Pressure Relief ProcedurePre-Installation Procedure Steps 2 through 6 are the Flushing Procedure309377 Model shown has Bend rigid Extension GroundingManual / Reset and Auto / Reset SetupTerms Keypad ButtonsSelecting Dispensing Options Resettable TotalUnits of Measurement Calibration Factor Auto Preset AmountCalibration Number Fluid Quarts LitersThis menu, you can change the shut-off default amount Shut-Off Default AmountOperation Dispensing Fluid in Manual ModeLocking and Unlocking the Trigger Checking Segments in the DisplayViewing Totals Dispensing Fluid in Auto ModeProblem Cause Solution TroubleshootingBattery on Replacing the Filter onSee in Installation Proce Installation ProcedureRings. See Servicing the Valve Automatic Nozzle onShut-off Default Amount section Error Code Cause SolutionSee the Auto Preset Amount ErrReplacing the Battery ServiceReplacing the Filter Replacing the Automatic Nozzle Servicing the ValveDescription Qty Parts ListIncludes 16a to 16e, 25, Parts Drawing Meter housingTechnical Data Dimensional Drawing Graco Information Graco Standard WarrantyToll Free 612--623--6928 612--378--3590 Fax